Dominik Mücke

Mr. Dominik Mücke


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 January 2024 in Journal of Laser Applications
Verified
Journal Article
Closed access
PDF file
YYYongting Yang
Yongting Yang
KBKay Bischoff
Kay Bischoff
DMDominik Mücke
Dominik Mücke
CECemal Esen
Cemal Esen
RHRalf Hellmann
Ralf Hellmann
The authors report on ultraviolet ultrashort pulsed laser ablation of fused silica and compare the achievable micromachining results to those obtained by using the fundamental emission wavelength in infrared. Ablation in ultraviolet reveals a stable efficiency for increasing fluences, whereas using an infrared beam exhibits a decreasing trend of the ablation efficiency at higher and increasing fluences. In addition, a significant improvement in the surface quality is found by using an ultraviolet wavelength in a fluence range up to 20 J/cm2 compared to infrared, e.g., revealing an Ra of down to 0.45 μm on using the ultraviolet wavelength compared to Ra = 0.56 μm on using infrared at fluences up 15 J/cm2. Moreover, taking advantage of the high available pulse energy, the authors compare the achievable ablation efficiency and surface roughness using a conventionally focused ultraviolet beam and a defocused ultraviolet beam, finding that the defocused ultraviolet beam possesses a processing quality comparable to that of the focused beam. Finally, the authors exemplify the potential of ultraviolet ultrashort pulsed laser ablation by using a Tesla mixer for microfluidic integration of fused silica.

25 March 2026 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Open access
PDF file
DFDaniel Franz
Daniel Franz
YYYongting Yang
Yongting Yang
DMDominik Mücke
Dominik Mücke
CECemal Esen
Cemal Esen
Ralf HellmannRalf Hellmann
Ralf Hellmann
We report for the first time on the realization, comprehensive characterization and application of a 6-axis articulated laser robot using a flexible beam guidance of ultrashort laser pulses via a non-polarization-maintaining hollow-core fiber. Measurements during and after a movement of the fiber-based ultrashort pulsed laser robotic (USPLR) system reveal that fundamental beam characteristics such as transmission, beam pointing and diameter and pulse duration are only marginally affected after passing through the hollow-core fiber. In addition, we studied the application of the USPLR system to laser cutting of brass foils and a printed circuit board (PCB) substrate in a single-path mode and optimize the process with respect to the heat-affected zone and kerf width by varying the applied pulse energy and robot speed. Our findings reveal that heat accumulation plays a significant role for the cutting quality at slow robot speeds of up to 20 mm/s, whereas a reduction of the kerf width down to about 7 µm is feasible. Furthermore, detected vibrations of the USPLR system with varying magnitude at different 3D spatial cutting positions result in oddness of the cutting edges of up to about 200 µm. Nevertheless, optimized process parameters result in a high cutting quality with a small heat-affected zone and a virtually straight and sharp cutting edges in a large processing area of 500 mm $$\times$$ 600 mm $$\times$$ 300 mm, highlighting the substantial potential of the fiber-based USPLR system for flexible and large-area 2D and 3D micromachining.

24 April 2024 in Liquids
Verified
Journal Article
Open access
PDF file
KBKay Bischoff
Kay Bischoff
DMDominik Mücke
Dominik Mücke
ASAndreas Schubert
Andreas Schubert
CECemal Esen
Cemal Esen
Ralf HellmannRalf Hellmann
Ralf Hellmann
In this article, the particle concentration of finely dispersed copper(II) oxide nanosuspensions as precursors for reductive laser sintering (RLS) is optimized on the basis of rheological investigations. For this metallization process, a smooth, homogeneous and defect-free precursor layer is a prerequisite for adherent and reproducible copper structures. The knowledge of the rheological properties of an ink is crucial for the selection of a suitable coating technology as well as for the adjustment of the ink formulation. Different dilutions of the nanosuspension were examined for their rheological behavior by recording flow curves. A strong shear thinning behavior was found and the viscosity decreases exponentially with increasing dilution. The viscoelastic behavior was investigated by a simulated doctor blade coating process using three-interval thixotropy tests. An overshoot in viscosity is observed, which decreases with increasing thinning of the precursor. As a comparison to these results, doctor blade coating of planar glass and polymer substrates was performed to prepare precursor layers for reductive laser sintering. Surface morphology measurements of the resulting coatings using laser scanning microscopy and rheological tests show that homogeneous precursor layers with constant thickness can be produced at a particle–solvent ratio of 1.33. A too-high particle content results in an irregular coating layer with deep grooves and a peak-to-valley height Sz of up to 7.8 μm. Precise dilution control allows the fabrication of smooth surfaces with a Sz down to 1.5 μm.