Micro-Electro-Mechanical System (MEMS) switches have emerged as pivotal components in the realm of miniature electronic devices, promising unprecedented advancements in size, power consumption, and versatility. This literature review paper meticulously examines the key issues and challenges encountered in the development and application of MEMS switches. The comprehensive survey encompasses critical aspects such as material selection, fabrication intricacies, performance metrics including switching time and reliability, and the impact of these switches on diverse technological domains. The review critically analyzes the influence of design parameters, actuation mechanisms, and material properties on the performance of MEMS switches. Additionally, it explores recent advancements, breakthroughs, and innovative solutions proposed by researchers to address these challenges. The synthesis of the existing literature not only elucidates the current state of MEMS switch technology but also paves the way for future research avenues. The findings presented herein serve as a valuable resource for researchers, engineers, and technologists engaged in advancing MEMS switch technology, offering insights into the current landscape and guiding future endeavors in this rapidly evolving field.
1 January 2017 in Superlattices and Microstructures
In this paper, a micro-electro-mechanical system-based cantilever is integrated as a line defect on a photonic crystal silicon slab for optical switching applications. The elliptical holes are etched in the photonic crystal waveguide that result in wide transmission bandwidth of 56 nm in comparison to etched circular holes in the structure with a footprint of only ${12.5}\,\,{\unicode{x00B5}{\rm m}} \times {8}\,\,{\unicode{x00B5}{\rm m}}$. The device is optimized for variation in height, the lattice constant, and semi-major and semi-minor axes in the optical range of the S-C-L band. It is shown that the response rise time of the device is 21 µs with very high extinction ratio of 30.4 dB and low insertion loss of 0.32 dB.
We demonstrate wavelength locking of a hybrid C MOS-silicon photonics ring-based transmitter through direct monitoring of the optical modulation amplitude (OMA) at the drop port of the ring modulator. The OMA is read from a Ge photodetector by a low-power 40nm CMOS circuit, which subsequently drives a feed-back loop that controls the modulator temperature using an integrated heater. OMA stabilization is demonstrated under abrupt laser wavelength variations of up to 150pm, under dynamic modulation at 2Gb/s.
In a practical MEMS switch, there is a gap between the beam and the signals lines. Based on this, a study on frequency response starting from dc to radio frequency for Gold and Aluminium is carried out. Study reveals that the pull-in voltage and capacitance ratio for Gold are 13.8 V and 88.3, respectively; while for Aluminium these values are 11.4 V and 82.4, respectively. Also a detailed study of variation of insertion loss with frequency is also carried out. The insertion and isolation losses with gold as beam layer are -1.42 and 40.4 dB, respectively, at radio frequency, while the same losses for Aluminium as beam layer are -1.19 and 36.1 dB, respectively at the same frequency.