Jianyu Feng

Dr. Jianyu Feng


Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 April 2016 in Oncology Letters
Verified
Journal Article
Open access
PDF file
GSGuodong Sun
Guodong Sun
LWLihui Wei
Lihui Wei
JFJianyu Feng
Jianyu Feng
JLJiumao Lin
Jiumao Lin
JPJun Peng
Jun Peng
Cancer stem cells (CSCs) are proposed to be closely correlated with the development and progression of tumors, as well as with chemo- and radioresistance. Targeting CSCs may therefore be a promising potential strategy for the treatment of cancer. Currently, natural products have received great interest due to their therapeutic efficacy and reduced adverse effects compared with modern chemotherapeutics. As a significant component of a number of traditional Chinese medicine formulas, the medicinal herb Hedyotis diffusa Willd. (HDW) has long been utilized in China to clinically treat a variety of malignancies, including colorectal cancer (CRC). Previously, the authors of the present study reported that HDW suppressed CRC growth through multiple mechanisms, including promoting apoptosis, and inhibiting cell proliferation and tumor angiogenesis. To additionally investigate its mode of action, the present study isolated a stem-like side population (SP) from colorectal cancer HT-29 cells to investigate the effect of ethanol extract of HDW on CSCs. It was observed that HDW was able to markedly downregulate the expression of CSC marker leucine-rich repeat-containing G-protein coupled receptor 5 and also significantly decrease the proportion of SP in HT-29 cells, in a dose-dependent manner. Furthermore, HDW treatment significantly and dose-dependently inhibited the viability and sphere formation, and induced cell morphological changes of isolated HT-29 SP cells. In addition, HDW greatly suppressed the messenger RNA expression of several critical genes that mediate CSC features, including ATP-binding cassette, sub-family B, member 1, β-catenin, c-Myc, proliferating cell nuclear antigen and survivin. In conclusion, the present study indicates that HDW may exert inhibitory effects on cancer stem cells.

30 June 2022 in Frontiers in Cardiovascular Medicine
Verified
Journal Article
Open access
YZYue Zheng
Yue Zheng
BQBingcai Qi
Bingcai Qi
WGWenqing Gao
Wenqing Gao
ZQZhenchang Qi
Zhenchang Qi
YLYanwu Liu
Yanwu Liu
TLTong Li
Tong Li
Background: The macrophages are involved in all stages of cardiovascular diseases, demonstrating the correlation between inflammation, atherosclerosis, and myocardial infarction (MI). Here, we aim to investigate macrophages-related genes in the deterioration of atherosclerosis. Methods: GSE41571 was downloaded and the abundance of immune cells was estimated by utilizing the xCell. By utilizing the limma test and correlation analysis, differentially expressed macrophages-related genes (DEMRGs) were documented. The functional pathways and the protein–protein interaction (PPI) network were analyzed and the hub DEMRGs were obtained. The hub DEMRGs and their interactions were analyzed using NetworkAnalyst 3.0 and for validation, the expressions of hub DEMRGs were analyzed using the GSE135055 and GSE116250 datasets as well as atherosclerosis and MI mice model. Results: A total of 509 differentially expressed genes (DEGs) were correlated with the abundance of macrophages and were identified as DEMRGs (Pearson correlation coefficients (PCC) > 0.6), which were mainly enriched in extracellular structure organization, lysosomal membrane, MHC protein complex binding, and so on. After screening out, 28 hub DEMRGs were obtained with degrees ≥20, including GNAI1 (degree = 113), MRPS2 (degree = 56), HCK (degree = 45), SOCS3 (degree = 40), NET1 (degree = 28), and so on. After validating using Gene Expression Omnibus (GEO) datasets and the atherosclerosis and MI mice model, eight proteins were validated using ApoE-/- and C57 mice. The expression levels of proteins, including SYNJ2, NET1, FZD7, LCP2, HCK, GNB2, and PPP4C were positively correlated to left ventricular ejection fraction (LVEF), while that of EIF4EBP1 was negatively correlated to LVEF. Conclusion: The screened hub DEMRGs, SYNJ2, NET1, FZD7, LCP2, HCK, GNB2, EIF4EBP1, and PPP4C, may be therapeutic targets for treatment and prediction in the patients with plaque progression and MI recurrent events. The kit of the eight hub DEMRGs may test plaque progression and MI recurrent events and help in the diagnosis and treatment of MI-induced heart failure (HF), thus decreasing mortality and morbidity.

10 September 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
JFJianyu Feng
Jianyu Feng
MZMingHao Zhou
MingHao Zhou
CCchuan chen
chuan chen
QWQidong Wang
Qidong Wang
LCLiqiang Cao
Liqiang Cao
With the development of artificial intelligence (AI) and high-performance computing (HPC), the microelectronic industry is challenged with increased device integration density. Chiplet architecture can break through a variety of limitations on the system-on-chip (SoC) to create a high-computility system. However, chiplet heterogeneous integration suffers from high heat flux and serious thermal interaction problems. The factors affecting thermal interaction are not clear. In this paper, a collective parameter model and a distribution parameter model are developed to clarify the optimization method to mitigate thermal interaction. The trends predicted by the parameter model are consistent with the finite element method (FEM) simulation results. Furthermore, to cool the chiplets, a thermal test vehicle is designed and fabricated, and the cooling performance of the test vehicle with different flow rates, different TIMs (Thermal Interfacial Materials) (DOW5888 vs. liquid metal), and different heat modes is experimentally investigated. Compared with DOW5888, the utilization of liquid metal TIM can mitigate thermal interaction by 56% and 76% at flow rates of 0.2 L/min and 0.8 L/min, respectively. Consequently, at a temperature rise of 60 °C and a flow rate of 0.8 L/min, using liquid metal TIM can achieve heat fluxes of 330 W/cm2 and 520 W/cm2 for two chiplets, respectively.

14 May 2025 in Frontiers of Optoelectronics
Verified
Journal Article
Open access
PDF file
SWSenhan Wu
Senhan Wu
SWSong Wen
Song Wen
HHHuimin He
Huimin He
JFJianyu Feng
Jianyu Feng
CCchuan chen
chuan chen
Haiyun XueHaiyun Xue
Haiyun Xue
This study explores the application of cold plate liquid cooling technology in co-packaged optics (CPO). By integrating optical modules and the switch chip on the same substrate, CPO shortens the electrical interconnection distance, effectively solving the problems of high power consumption and poor signal integrity of traditional pluggable optical modules under high bandwidth. However, the surge in power density and the thermal crosstalk resulting from high integration density make thermal management one of the key challenges that constrain the reliability of high-capacity co-packaged optics. For the unique architecture of CPO, this study analyzes its heat dissipation needs in detail, and a thermal management scheme is designed. The thermal management scheme is simulated and optimized based on the Navier−Stokes equation. The simulation results show that, in a 51.2 Tbit/s CPO system, the junction temperature of the switch chip is 97.3 °C, the maximum junction temperature of the optical modules is 31.3 °C, and the temperature difference between the optical modules is 2.4 °C to 1.2 °C. To verify the simulation results, a thermal test experimental platform is built, and the experimental results show that the temperature simulation difference is within 4% and the pressure change trend is consistent with the simulation. Combining the experimental data and simulation results, the designed heat sink can satisfy the heat dissipation demands of the 51.2 Tbit/s bandwidth CPO system. This conclusion demonstrates the potential of liquid-cooling technology in CPO, providing support for research on liquid-cooling technology in the CPO. The design provides a theoretical and practical basis for the high performance and reliability of optoelectronic integration technology in wavelength division multiplexing (WDM) systems and micro-ring device applications, contributing to the application of next-generation optical communication networks. Graphical Abstract

23 December 2023 in Micromachines
Verified
Journal Article
Open access
PDF file
YSyunqian song
yunqian song
CCchuan chen
chuan chen
QWQidong Wang
Qidong Wang
JFJianyu Feng
Jianyu Feng
RFRong Fu
Rong Fu
LCLiqiang Cao
Liqiang Cao
Cooling is important for AlGaN/GaN high-electron mobility transistors (HEMTs) performance. In this paper, the advantages and disadvantages of the cooling performance of three cooling schemes: remote cooling (R-cool), near-chip cooling (NC-cool), and chip-embedded cooling (CE-cool) are compared. The influences of distinct geometric parameters and operating conditions on thermal resistance are investigated. The results show that the thermal resistances of NC-cool and CE-cool are almost the same as each other. Decreasing microchannel base thickness (hb) significantly increases the thermal resistance of CE-cool, and when its thickness is less than a critical value, NC-cool exhibits superior cooling performance than CE-cool. The critical thickness increases when decreasing the heat source pitch (Ph) and the convective heat transfer coefficient (hconv) or increasing the thermal conductivity of the substrate (λsub). Moreover, increasing Ph or λsub significantly improves the thermal resistance of three cooling schemes. Increasing hconv significantly decreases the thermal resistances of NC-cool and CE-cool while hardly affecting the thermal resistance of R-cool. The influence of the boundary thermal resistance (TBR) on the thermal resistance significantly increases at higher λsub and larger hconv.

18 September 2024 in IEEE Transactions on Components, Packaging and Manufacturing Technology
Verified
Journal Article
Closed access
JFJianyu Feng
Jianyu Feng
RFRong Fu
Rong Fu
YSYunqian Song
Yunqian Song
QWQidong Wang
Qidong Wang
CCchuan chen
chuan chen
LCLiqiang Cao
Liqiang Cao
Three-dimensional(3D) integration technology is an effective solution of extending Moore’s Law, with better performance and higher density. However, the temperature rise caused by hotspots in 3D integration will be more prominent. By extracting the equivalent thermal conductivity of the microbump layer and the chip with TSVs, the equivalent analytical model for detailed 3D integration structure is proposed in this paper. The accuracy of equivalence is verified using finite element simulation, and the model is used to calculate the thermal resistance and to predict the maximum temperature of the hotspot. In 3D integration, the second conduction path can significantly reduce the temperature of the hotspot. A new analytical solution is proposed in this paper for calculating thermal resistance and predicting the maximum temperature of the hotspot in 3D integration. The results demonstrate that the thermal resistance network model proposed can precisely predict the temperature rise of the hotspot. For hotspots with different sizes, the error between simulation and network model is merely within 2 °C. The effects of different factors on the hotspot temperature rise in 3D integration is investigated. As the chip material, diamond can significantly reduce the hotspot temperature. Furthermore, the chip thickness and the thermal conductivity of microbump layer both have effect on the temperature of hotspot with different sizes. For cases with large-sized hotspot, to decrease the hotspot temperature, smaller microbump and greater chip thickness are advised in packaging.