The Institute of Space Systems at Technische Universität Braunschweig has long-term experience in the field of space debris modeling. This article reviews the current state of ongoing research in this area. Extensive activities are currently underway to update the European space debris model MASTER. In addition to updating the historical population, the future evolution of the space debris environment is also being investigated. The competencies developed within these activities are used to address current problems with regard to the possibility of an increasing number of catastrophic collisions. Related research areas include, for example, research in the field of orbit determination and the simulation of sensor systems for the acquisition and cataloging of orbital objects. In particular, the ability to provide simulated measurement data for object populations in almost all size ranges is an important prerequisite for these investigations. Some selected results on the distribution of space debris on Earth orbit are presented in terms of spatial density. Furthermore, specific fragmentation events will be discussed.
Environmental pollution exists not only within our atmosphere but also in space. Space debris is a critical problem of modern and future space infrastructure. Congested orbits raise the question of spacecraft disposal. Therefore, state-of-the-art satellites come with a deorbit system in cases of low Earth orbit (LEO) and with thrusters for transferring into the graveyard orbit for geostationary and geosynchronous orbits. No practical solution is available for debris objects that stem from fragmentation events. The present study focuses on objects in LEO orbits with dimensions in the dangerous class of 1 to 10 cm. Our assumed method for the change of trajectories of space debris is laser ablation for collision avoidance or complete removal by ground-based laser systems. Thus, we executed an experimental feasibility study with focus on thermal and impulse coupling between laser and sample. Free-fall experiments with a 10 ns laser pulse at nominally 60 J and 1064 nm were conducted with GSI Darmstadt’s nhelix laser on various sample materials with different surfaces. Ablated mass, heating, and trajectory were recorded. Furthermore, we investigated the influence of the sample surface roughness on the laser-object interaction. We measured impulse coupling coefficients between 7 and 40 µNs/J and thermal coupling coefficients between 2% and 12.5% both depending on target fluence, surface roughness, and material. Ablated mass and changes in surface roughness were considered via simulation to discriminate their relevance for a multiple shot concept.
The ever-increasing number of man-made space debris creates the need for new technologies to mitigate it. Therefore, within the ESA-funded project BIOINSPACED, biologically inspired solutions for active debris removal were investigated, conceptualized and integrated to innovative and comprehensive scenarios. In the following, the collection process of existing and new biomimetic concepts as well as the evaluation of ten concepts based on a feasibility analysis will be presented. Out of the ten, the three most promising scenarios, were chosen for further investigation and further elaborated in detail specifying the biological models incorporated as well as how the scenario could be implemented in a simple demonstrator. The first scenario (A) is a gecko kit canon and describes a system that fires deorbiting kits towards the target from a safe distance. The second scenario (B) involves a robotic arm with a gecko-adhesive end-effector and a bee-inspired harpoon to achieve a preliminary and subsequent rigid connection to the target. The last scenario (C) is mimicking a Venus Flytrap and its bi-stale mechanism to capture its prey. One of these scenarios will be manufactured and built into a demonstrator to showcase biology’s potential for the development, optimization and improvement of technologies, especially within the space industry.
Unmanned aerial vehicles (UAVs) have been used for increasing research applications in atmospheric measurements. However, most current solutions for these applications are based on a single UAV with limited payload capacity. In order to address the limitations of the single UAV-based approach, this paper proposes a new concept of measurements using tandem flying multicopters as a distributed sensor platform. Key challenges of the proposed concept are identified including the relative position estimation and control in wind-perturbed outdoor environment and the precise alignment of payloads. In the proposed concept, sliding mode control is chosen as the relative position controller and a gimbal stabilization system is introduced to achieve fine payload alignment. The characterization of the position estimation sensors (including global navigation satellite system and real-time kinematics) and flight controller is carried out using different UAVs (a DJI Matrice M600 Pro Hexacopter and Tarot X4 frame based Quadcopter) under different wind levels. Based on the experimental data, the performance of the sliding mode controller and the performance of the gimbal stabilization system are evaluated in a hardware-in-the-loop simulation environment (called ELISSA). Preliminary achievable control accuracies of the relative position and attitude of subsystems in the proposed concept are estimated based on experimental results.