Restorations in dentistry must reproduce the aspect of the patient’s natural teeth and require non-toxicity, biocompatibility, and good mechanical properties in order to last longer. Restorations are permanently in contact with microbes that can adhere to and form biofilms. The purpose of this study was to determine the adhesion extent of Streptococcus mutans to polymethyl methacrylate (PMMA) resin base containing TiO₂ nanoparticles. To understand the adhesion of Streptococcus mutans on the modified resin-based surfaces, the following surface properties were measured: the roughness, contact angle, zeta potential and CIE color parameters. Evaluation of tensile stress performance in TiO2 modified PMMA showed that the maximum tensile stress of the modified PMMA resin decreases with an increasing amount of TiO₂ nanoparticles. The increasing amount of TiO₂ decreases the roughness and causes contact angles in the border between hydrophilic and hydrophobic surfaces. All the studied surfaces are negatively charged and added TiO₂ tends to increase the zeta potential. The addition of TiO₂ nanoparticles increases the lightness and decreases the intensity of the red and yellow color. The increasing addition of TiO₂ nanoparticles into PMMA increases the morphological change of bacterial cells.

Full and partial restorations in dentistry must replicate the characteristics of the patient’s natural teeth. Materials must have good mechanical properties and be non-toxic and biocompatible. Microbes, which can form biofilms, are constantly in contact with restorations. In this study, we investigate how well Candida albicans adheres to a polymethyl methacrylate (PMMA) resin base with gold (Au) nanoparticles. We synthesized Au nanoparticles and characterized them. The average size of Au nanoparticles embedded in PMMA was 11 nm. The color difference ΔE between PMMA and PMMA/Au composites was 2.7 and was still esthetically acceptable to patients. PMMA/Au surfaces are smoother and more hydrophilic than pure PMMA surfaces, and the isoelectric point of both types of surfaces was 4.3. Above the isoelectric point, PMMA/Au surfaces are more negatively charged than PMMA surfaces. The added Au nanoparticles decreased the tensile strength, while the hardness did not change significantly. Adhesion measurements showed that PMMA surfaces modified with Au nanoparticles reduced the extent of microbial adhesion of Candida albicans.

Recent advances in biomaterials, immunomodulation, stem cell therapy, and biofabrication are reshaping maxillofacial surgery, shifting reconstruction paradigms toward biologically integrated and patient-specific tissue regeneration. This review provides a comprehensive synthesis of current and emerging strategies for bone and soft-tissue regeneration in the craniofacial region, with particular emphasis on bioactive ceramics, biodegradable polymers, hybrid composites, and stimuli-responsive smart materials. We further examine translational technologies such as extracellular vesicles, decellularized extracellular matrices, organoids, and 3D bioprinting, highlighting key challenges such as bioink standardization, perfusion limitations, and regulatory classification. Maxillofacial surgery is positioned for a paradigm shift toward personalized, biologically active, and clinically scalable regenerative solutions.

The aim of this study was to investigate the epidemiology of dental trauma in a public dental clinic in Banja Luka, Bosnia and Herzegovina, from 2019 to 2024. Methods: This research was conducted as a retrospective cross-sectional study. The data were analysed and compared between injured primary and permanent maxillary and mandibular teeth. Results: The review of the dental records revealed 73 patients (49 boys and 24 girls) with TDIs, involving 55 primary and 64 permanent teeth. Most of the patients (27 patients, 36.98%) were aged 7–9 years. The main cause of TDI was falls in both dentitions (81.81% of injured primary teeth and 73.43% of injured permanent teeth). The time of arrival after a TDI for assistance in the dental clinic for most cases was after 24 h in both dentitions, 45.45% of injured primary teeth and 48.43% of permanent teeth. For both dentitions, enamel fractures were the most common injury of hard dental tissues and the pulp, and the necrosis of the maxillary central incisor was the most common complication. Conclusions: It is very important to improve trauma management and increase public knowledge on the way parents seek proper treatment for the TDIs of their children, and in due time.

Objectives: The aim of this study was to evaluate the influence of artificial ageing on the retention force of original semipermanent cements, as well as the possibility of using conventional cements for semipermanent cementation with adequate modification of the cementing protocol. Material and methods: Forty CoCrMo alloy crowns were divided in four groups (each group n=10) and fixed with two semipermanent cements (resin-based and glass ionomer-based cements) and one conventional (zinc phosphate), using conventional and modified cementation techniques on titanium abutments. The samples were stored in humid conditions for 24 hours at 37 degrees C and subjected to thermocycling (500 cycles) and mechanical cyclic loading (7 days, 3, 6, 9 and 12 months function simulation). The cast crowns were removed and the retention force was recorded. Results: The highest initial retention force measured was for zinc-phosphate cement-conventional cementing (198,00 +/- 61,90 N), followed in descending order by zinc-phosphate cement - modified cementing technique (152,00 +/- 45,42 N), long term temporary cement - GC Fuji Temp LT (57,70 +/- 20,40 N), and semipermanent cement - Te-lio CS Cem Implant (56,10 +/- 18,68 N). After 12 months, the highest retention force measured was for zinc-phosphate cement - conventional cementing (88, 90 +/- 14, 45 N), followed by zinc-phosphate cement - modified cementing (48, 15 +/- 14,41N), semipermanent cement GC Fuji Temp LT (16,55 +/- 3,88 N) and Telio CS Cem Implant (15,55 +/- 5,52 N). Conclusions: Zinc-phosphate cement - modified cementing technique and original semipermanent cements can be recommended for conditional permanent cementing of implant supported crowns. Clinical relevance: The use of semipermanenet cements and zinc-phosphate cement - modified cementing technique provides a predictable retrievability of implant-supported crowns.

Dental restorations need to reproduce the aspect of the natural teeth of the patient, and must be non-toxic, biocompatible, and have good mechanical properties so that they can last for longer. The aim of this study was to determine the extent of bacterial adhesion of Streptococcus mutans on four different dental material surfaces, i.e., two glass–ionomer cements (Fuji conventional and Fuji hybrid) and two ceramic composites (Micro hybrid composite and Nano hybrid composite). To understand the bacterial adhesion on these four different dental materials, various surface properties were measured: roughness, contact angle, CIE color parameters and zeta potential. We found that the greatest adhesion extent was obtained for the Nano hybrid composite surface. The pronounced adhesion is the interplay between the relatively high roughness and hydrophilicity of the Nano hybrid composite surface. Color changes upon immersing ceramic composites in red wine and black tea proved that both beverages adhered to them. Black tea adhered more intensively than wine, and showed a higher inhibitory effect on the growth of Streptococcus mutans and Staphylococcus aureus.