Shenlei Bao

Shenlei Bao

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 May 2024 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
JXJintao Xue
Jintao Xue
Binhao WangBinhao Wang
Binhao Wang
YCYihan Chen
Yihan Chen
SCSikai Chen
Sikai Chen
JWJinyi Wu
Jinyi Wu
WZWenfu Zhang
Wenfu Zhang
We present a four-channel polarization-insensitive silicon photonic (SiPh) wavelength division multiplexing (WDM) receiver, incorporating a polarization splitting grating coupler, dual-ring filters and bidirectional photodiodes. This design achieves an ultra-compact footprint of 1 mm × 0.2 mm with a polarization dependent loss (PDL) of 0.58 dB or less. Four clearly open eye diagrams at a data rate of 112 Gb/s PAM4 are obtained. Furthermore, we demonstrate the hybrid integration of the SiPh chip with a 28 nm CMOS transimpedence amplifier (TIA), resulting in an impressive energy efficiency of 1.34 pJ/bit at a data rate of 100 Gb/s PAM4. Sensitivities of −13.4 dBm and -5.6 dBm are achieved at data rates of 50 Gb/s NRZ and 100 Gb/s PAM4, respectively, under KP4 forward error correction (FEC) threshold.

27 March 2024 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
SBShenlei Bao
Shenlei Bao
YMYingjie Ma
Yingjie Ma
JXJintao Xue
Jintao Xue
JWJinyi Wu
Jinyi Wu
NQNan Qi
Nan Qi
Binhao WangBinhao Wang
Binhao Wang
Silicon microring modulators have huge potential for applications in co-packaged optics (CPO) and optical I/O (OIO) owing to the superior bandwidth, small footprint, and inherent wavelength multiplexing characteristics. To enable efficient and robust optical transceiver systems, codesign and cosimulation environments are essential for optimization of photonic devices, transceiver circuitry and electronic-photonic integrated circuits (EPIC). We introduce a comprehensive equivalent circuit model for single- and dual-segment silicon microring modulators (MRMs), which accurately capture the device behavior during high-speed modulation. This model includes electrical parasitics, nonlinear optical steady state and dynamics, and thermo-optic effects. Model parameters are extracted by curve fitting MRM optical transmission spectrum and small signal characteristics. The simulated eye diagrams exhibit excellent alignment with the measured eye diagrams at data rates of 80Gb/s and 106Gb/s. A cosimulation environment with a MRM driver in 28nm CMOS and a MRM in 130nm silicon photonics is demonstrated on an electronics design automation (EDA) platform. An optical eye diagram at a data rate of 212Gb/s PAM8 is successfully achieved by optimizing the driver equalizer and the MRM two segment ratio. Then an EPIC with photonics-electronics closedloop feedback control algorithm is demonstrated, achieving a significantly larger eye opening after thermal tuning, thanks to the accurate equivalent circuit model of the MRM.

13 February 2025 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
JXJintao Xue
Jintao Xue
Binhao WangBinhao Wang
Binhao Wang
SMSiyuan Ma
Siyuan Ma
SBShenlei Bao
Shenlei Bao
QMQianli Ma
Qianli Ma
WZWenfu Zhang
Wenfu Zhang
Silicon microring modulators (MRMs) are pivotal for enabling high-bandwidth, power-efficient dense wavelength division multiplexing (DWDM) optical I/O. This paper introduces a dual-segment MRM featuring four N-type and four P-type doping concentrations. By optimizing the doping profiles, the MRM achieves a 43% reduction in loss and a 10% reduction in capacitance, while maintaining comparable modulation efficiency to MRMs with three N-type and three P-type doping concentrations. This design achieves an electro-optic (EO) bandwidth exceeding 60 GHz, marking a 15% increase over its single-segment counterpart. An equivalent circuit model, which aligns excellently with experimental results, demonstrates the co-design capability of electronic and photonic integrated circuits (EPIC). The dual-segment MRM exhibits comparable modulation efficiency to the single-segment MRM, with a measurement of approximately 0.63 V$\cdot$ cm. Both modulators operate successfully at data rates of 106 Gb/s using PAM4. With the ample EO bandwidth, a data rate of 128 Gbaud/s using NRZ is also demonstrated for the dual-segment MRM. For the first time, a 64 Gbaud/s hybrid integrated dual-segment MRM transmitter (TX) is demonstrated, employing a segmented driver with a feed forward equalization (FFE) circuit. This TX is paired with a co-designed 28 nm complementary metal oxide semiconductor (CMOS) driver for DWDM optical I/O, showcasing high bandwidth density and power efficiency.

20 August 2025 in IEEE Photonics Technology Letters
Verified
Journal Article
Closed access
SMShuaizhe Ma
Shuaizhe Ma
XLXi Liu
Xi Liu
NRNianquan Ran
Nianquan Ran
YXYifei Xia
Yifei Xia
YYYuye Yang
Yuye Yang
DLDan Li
Dan Li
Differential sensing in intensity modulation/direct detection (IM-DD) theoretically offers sensitivity advantages. However, the need for reverse bias restricts photodiodes (PD) to AC coupling with differential TIAs, causing noise, bandwidth degradation, and baseline wander, compromising the advantage of differential sensing. This letter introduces the CMOS stacked-differential optical receiver architecture that employs DC coupling to connect the PD cathode and anode, enabling differential signal reception and reverse bias without AC coupling’s drawbacks. Fabricated in a standard 180-nm CMOS process and coupled with a PIN PD, the receiver achieves a differential-mode OMA sensitivity of −18.5 dBm. Comparative single-ended measurements were also performed, demonstrating a 1.3 dB sensitivity advantage from differential signaling which closely aligns with theoretical predictions. Operating at a 3.3 V power supply voltage compatible with optical devices, the receiver consumes 89.1 mW, with 86.5 mW utilized by the signal channels, resulting in a power efficiency of 97%.

2 June 2025 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
SMShuaizhe Ma
Shuaizhe Ma
XLXi Liu
Xi Liu
YXYifei Xia
Yifei Xia
CYChuanhao Yu
Chuanhao Yu
YYYuye Yang
Yuye Yang
DLDan Li
Dan Li
This brief presents a 10 Gb/s optical receiver frontend that aims to replace the traditional APD with transimpedance amplifier (TIA) with a cost-effective design combining a PIN-PD and a super low-noise TIA (S-TIA). The STIA employed in this study features both architecture and circuit innovation to reach the substantial noise reduction required. Additionally, an innovative on-chip integrated lownoise PD bias is proposed. According to the test results, the entire chip consumes 121 mW of power, achieves a gain of 92 dBΩ, a bandwidth of 5.3 GHz, an input noise of 259 nArms, and an input noise density of 3.6 pA/Hz. The receiver demonstrates an Optical Modulation Amplitude (OMA) of -26.2 dBm at 10 Gb/s with a Bit Error Rate (BER) of 1E-3.

17 December 2025 in Micromachines
Verified
Journal Article
Open access
PDF file
YYYihao Yang
Yihao Yang
CCChao Cheng
Chao Cheng
RYRuixuan Yang
Ruixuan Yang
Yangming RenYangming Ren
Yangming Ren
SBShenlei Bao
Shenlei Bao
Binhao WangBinhao Wang
Binhao Wang
The rapid development of continuous-variable quantum communication has driven an increasing demand for high-performance quantum signal processing modules. Among these, the balanced homodyne detector (BHD) has emerged as a leading solution for practical quantum state measurement due to its capability to provide complete quantum mechanical characterization. However, its performance is often constrained by limited bandwidth and high noise levels, primarily due to the reliance on bulk optical components and discrete receiver electronics. The dominant noise source in these systems typically stems from electronic noise, while imbalances in the optical path further degrade the signal-to-noise ratio (SNR) of the BHD. In this work, we present an adjustable integrated optical path to enhance the balance within the BHD system, along with a low-noise transimpedance amplifier (TIA) by employing optoelectronic co-design. Our design achieves a bandwidth of 2.5 GHz, an input-referred noise current of only 2 pA/√Hz in 180 nm CMOS technology, and a measured quantum shot noise clearance of 15 dB generated from a 700 μA photocurrent. This is the maximum quantum shot noise clearance at the same BHD photocurrent reported to date above the GHz bandwidth.