In the frame of the Next Generation Europe program, the EU program to boost after-COVID recovery, the Italian Minister of University and Research has funded a project called Innovative Research Infrastructure for applied Superconductivity (IRIS). New laboratories will be built or upgraded in six poles: Milan (hub of the infrastructure), Genoa, Frascati, Naples, Salerno, and Lecce, to carry out basic research on magnetism and superconducting materials, test of wires, tapes, and large current cables, superconducting magnets construction with advanced instrumentation, power tests of magnets, and a special facility for high current-high voltage superconducting lines. The program will be executed over three years and then will operate for at least 10 years. It includes two first demonstrators: one HTS magnet to be operated at 10–20 K and a superconducting line of 1 GW (40 kA–25 kV) about 140 m long. The demonstrators anticipate the main scope of the investment in the IRIS infrastructure: to support the use of superconductivity for improving sustainability by decreasing the energy consumption without compromising performance. This article describes the global IRIS project.

Rotating-coil measurement systems are widely used to measure the multipolar fields of particle accelerator magnets. This paper presents a rotating-coil measurement system that aims at providing a complete data set for the characterization of quadrupole magnets with small bore diameters (26 mm). The PCB magnetometer design represents a challenging goal for this type of transducer. It is characterized by an aspect ratio 30% higher than the state of the art, imposed by the reduced dimension of the external radius of the rotating shaft and the necessity of covering the entire magnet effective length (500 mm or higher). The system design required a novel design for the mechanical asset, also considering the innovation represented by the commercial carbon fiber tube, housing the PCB magnetometer. Moreover, the measurement system is based primarily on standard and commercially available components, with simplified control and post-processing software applications. The system and its components are cross-calibrated using a stretched-wire system and another rotating-coil system. The measurement precision is established in a measurement campaign performed on a quadrupole magnet characterized by an inner bore diameter of 45 mm.

In the framework of the euro SIG project and within an international collaboration between CNAO, CERN, INFN, and MedAustron, the design of a novel gantry for hadron therapy based on superconducting magnets and a downstream scanning system has been undertaken. The choice of placing the scanning system downstream of the last superconducting dipole plays a crucial role in the overall layout of the gantry, having a direct impact on its radius, weight, and cost. The proposed design for the scanning system considers two separate normal-conducting scanning magnets with a central field in the order of 1 T, three times higher than the current state-of-the-art scanning magnets for hadron therapy. Such a magnetic field value for a fast-pulsed magnet poses interesting questions regarding non-linearities due to the yoke saturation, hysteretic effects, and eddy currents. In this context, it is important to develop reliable models to study the behavior of the magnet at various levels of current and magnetic field. For this reason, we implemented two and three-dimensional simulations of a short dipole with FeCo yoke and we validated them against experimental measurements. In this paper, we focus on the modelization of the hysteretic behavior of this magnet, providing insight into the feasibility of proposed scanning magnets.

The SPARC_LAB facility, operating at the LNF-INFN laboratories in Frascati, has been devoted over the past years to R&D related to accelerators, advanced diagnostics, and generation of radiation ranging from THz to extreme UV light. The facility has recently been significantly upgraded and moved toward user-oriented applications, especially after the approval of two additional projects with the goal to develop radiation sources up to the soft x-ray range and in view of the EuPRAXIA project, whose preparatory phase is ongoing with the support of the European Commission. This paper summarizes the electron beam and radiation parameters and describes the layout and main features of the upgraded facility in view of future user-oriented experimental activities and applications.

EuPRAXIA@SPARC_LAB is an FEL (Free-Electron Laser) user facility currently under construction at INFN-LNF in the framework of the EuPRAXIA collaboration. The electron beam will be accelerated to 1 GeV by an X-band RF linac followed by a plasma wakefield acceleration stage. This high-brightness linac requires diagnostic devices able to measure the beam parameters with high accuracy and resolution. To monitor the beam energy and its spread, magnetic dipoles and quadrupoles will be installed along the linac, in combination with viewing screens and CMOS cameras. Macroparticle beam dynamics simulations have been performed to determine the optimal energy measurement setup in terms of accuracy and resolution. Similar diagnostics evaluations have been carried out for the spectrometer installed at the 100 MeV RF linac of the radioactive beam facility SSRIP (IFIN-HH, Romania), whose commissioning, foreseen for 2026, will be performed by INFN-LNF in collaboration with IFIN-HH. Optics measurements have been performed to characterize the resolution and magnification of the optical system that will be used at SSRIP, and probably also at EuPRAXIA@SPARC_LAB, for beam energy monitoring.

The Frascati National Laboratories (LNF) of the National Institute for Nuclear Physics (INFN) have extensive experience in the design and measurement of magnets for particle accelerators. Recently, LNF activities moved towards high-brightness electron sources with the SPARC_LAB facility, where the current activities are focused on plasma-based acceleration techniques. This facility is the baseline for the future EuPRAXIA@SPARC_LAB accelerator. According to the program needs of the LNF facilities, several designs of room temperature magnets have been carried out in recent years, covering several magnet types. A Magnetic Measurement Facility (MMF) is present at LNF; it is devoted in magnet characterization thanks to a wide range of equipment for integrated measurement as well as 3D field mapping. In recent years, an upgrade of the instrumentation has been required in order to keep pace with the evolving technologies in and to ensure the preservation of expertise. This revamping is oriented towards both the update of the existing infrastructure, and the purchase of new equipment. In this paper, recent and most relevant magnets design and magnetic measurement tests performed at LNF are presented. The design and measurements for quadrupoles of BTF-2, solenoids and Permanent Magnet Quadrupoles (PMQ) for SPARC_LAB test facility are presented in detail. Moreover, an overview of the magnetic laboratory equipment upgrade is given, 0highlighting the current and future instruments that will be hosted in the renewed facility. These improvements are aimed in meeting measurement demands across many types of magnets, from both external users and for the future projects of LNF.