We study the influence of Nb doping on the ${\mathrm{TiO}}_2$ anatase-to-rutile phase transition, using combined transmission electron microscopy, Raman spectroscopy, x-ray diffraction and selected area electron diffraction analysis. This approach enabled anatase-to-rutile phase transition hindering to be clearly observed for low Nb-doped ${\mathrm{TiO}}_2$ samples. Moreover, there was clear grain growth inhibition in the samples containing Nb. The use of high resolution transmission electron microscopy with our samples provides an innovative perspective compared with previous research on this issue. Our analysis shows that niobium is segregated from the anatase structure before and during the phase transformation, leading to the formation of NbO nanoclusters on the surface of the ${\mathrm{TiO}}_2$ rutile nanoparticles.

Dissipated power in metal oxide nanowires $\left(r_{\text{NW}}<45\text{nm}\right)$ often causes important self-heating effects and as a result, undesired aging and failure of the devices. Nevertheless, this effect can be used to optimize the sensing conditions for the detection of various gaseous species, avoiding the requirement of external heaters. In this letter, the sensing capabilities of self-heated individual ${\text{SnO}}_2$ nanowires toward ${\text{NO}}_2$ are presented. These proof-of-concept systems exhibited responses nearly identical to those obtained with integrated microheaters, demonstrating the feasibility of taking advantage of self-heating in nanowires to develop ultralow power consumption integrated devices.

The responses of individual ZnO nanowires to UV light demonstrate that the persistent photoconductivity (PPC) state is directly related to the electron-hole separation near the surface. Our results demonstrate that the electrical transport in these nanomaterials is influenced by the surface in two different ways. On the one hand, the effective mobility and the density of free carriers are determined by recombination mechanisms assisted by the oxidizing molecules in air. This phenomenon can also be blocked by surface passivation. On the other hand, the surface built-in potential separates the photogenerated electron-hole pairs and accumulates holes at the surface. After illumination, the charge separation makes the electron-hole recombination difficult and originates PPC. This effect is quickly reverted after increasing either the probing current (self-heating by Joule dissipation) or the oxygen content in air (favouring the surface recombination mechanisms). The model for PPC in individual nanowires presented here illustrates the intrinsic potential of metal oxide nanowires to develop optoelectronic devices or optochemical sensors with better and new performances.