In this paper, two techniques of game theory are considered for sizing and comparative analysis of a grid-connected networked microgrid, based on a multi-objective imperialistic competition algorithm (ICA) for system optimization. The selected networked microgrid, which consists of two different grid-connected microgrids with common electrical load and main grid, might have different combinations of generation resources including wind turbine, photovoltaic panels, and batteries. The game theory technique of Nash equilibrium is developed to perform the effective sizing of the networked microgrid in which capacities of the generation resources and batteries are considered as players and annual profit as payoff. In order to meet the equilibrium point and the optimum sizes of generation resources, all possible coalitions between the players are considered; ICA, which is frequently used in optimization applications, is implemented using MATLAB software. Both techniques of game theory, Shapley values and Nash equilibrium, are used to find the annual profit of each microgrid, and results are compared based on optimum sizing, and maximum values of annual profit are identified. Finally, in order to validate the results of the networked microgrid, the sensitivity analysis is studied to examine the impact of electricity price and discount rates on maximum values of profit for both game theory techniques.
This paper focuses on performing peer-to-peer (P2P) energy trading in a grid-tied multi-microgrid system (MMS). To do so, three microgrids, each consisting of distributed energy resources (DERs) such as wind turbines (WTs), solar photovoltaic (PV) systems, and battery storage systems, are considered. A game theory-based structure, supported by the Nash equilibrium, is then formulated to derive, and solve the multi-objective function (MoF) with the intention of allocating the correct sizing of each DER and finding out the optimum payoff values. The proposed optimisation model is also integrated with reliability index (IR) and levelised cost of energy (LCOE) in order to cut down the energy costs during intermittent periods of DERs. The developed framework is analysed and compared with other benchmark techniques on particle swarm optimisation (PSO) algorithm-facilitated MATLAB environment to conduct both P2P and peer-to-grid (P2G) energy trading. The simulation results: 1) verify the proposed MOF against various constant coefficients' combination, and 2) determine the most financially viable model for each DER through sensitivity analysis.
In this paper, a novel grid-connected smart and plug-and-play type extendable structure named unified multiport power electronic converter (UMPEC) for hybrid integration of distributed generation (DG) systems is presented. The proposed structure contains two types of connector ports. The first one is a set of AC connectors, which can be easily used to connect different types and numbers of AC-based DGs along with grid and loads. The second one is a set of DC connectors, which can interface DC-based DGs and storage units. Compared with the conventional and recently invented multi-stage power electronic topologies, the proposed structure enjoys less number of power electronic components, compactness, and plug-and-play capability of integrating AC and DC-based DGs. Considering shared components between different ports and their imposed boundaries on the operation of the UMPEC, a modified sequential space vector modulation is addressed, which makes it possible to control different ports independently, without compromising with maximum power harnessing from individual sources, which is another salient feature of this work. The proposed structure operation and performance is verified using a three DC and two AC connectors version, where wind and photovoltaic systems are independently interfaced to the grid.
9 July 2018 in IEEE Transactions on Power Electronics
This paper proposes a novel unified expandable low switch power electronic converter architecture for grid integration of direct drive variable speed wind turbine (VSWT) system using permanent magnet synchronous generator (PMSG). The proposed unified expandable power converter (UEPC) can interface two or more bidirectional output ports such as wind generators, energy storages and grid. The size of the power converter is compact because of low number of power electronic switches and protection devices and its architecture is easily expandable to accommodate more outputs, i.e., in this case, the wind turbines. A generalized sequential space vector modulation technique is developed based on the operational principle of the proposed converter to control of the outputs autonomously in order to track maximum power point for individual VSWTSs driven PMSG's. It is expected that the proposed approach will reduce the cost of power electronic converters in a wind farm compared to both AC- and DC-link based topologies, which are available for the moment
3 November 2022 in IEEE Transactions on Industry Applications
In this paper, the modeling of an optimum fast charging profile for lead-acid batteries (LABs) is proposed. The proposed profile is a multi-step constant current (MSCC) where various current magnitudes in a descending manner are applied to the battery; therefore, it prevents the over-voltage and gassing phenomenon at the end of charging process, and shortens the charging time at the same time. Using an electro-thermal model of a LAB, an optimization problem containing charging time, battery temperature during the process, and battery's terminal voltage as objective functions is defined. The magnitude and duration of all charging steps are taken into account as control variables to be optimized for minimizing the objective functions using a particle swarm optimization (PSO) algorithm. A comparison between different conventional charging profiles for LABs is also provided in terms of charging time and battery's temperature and voltage. The simulation results carried out by MATLAB/Simulink show that the proposed profile reduces the charging time, while keeps the battery's temperature and voltage during the charging process within allowable range. The impacts of model's uncertainties on the proposed approach is evaluated. A comprehensive comparison is also provided to confirm the benefits of the proposed method over MSCC profiles reported in the literature. The effectiveness of the proposed approach is finally validated using the experimental implementation for a 12V 200Ah lead-acid battery.