The implant surface features affect the osseointegration process. Different surface treatment methods have been applied to improve the surface topography and properties. Trace of different elements may appear on the implant surface, which can modify surface properties and may affect the body’s response. The aim was to evaluate the roughness based on the surface treatment received and the amount and type of trace elements found. Ninety implants (nine different surface treatment) were evaluated. Roughness parameters were measured using white-light-interferometry (WLI). The arithmetical mean for R_a, R_q, R_t, and R_z of each implant system was calculated, and Fisher’s exact test was applied, obtaining R_a values between 0.79 and 2.89 µm. Surface chemical composition was evaluated using X-ray photoelectron spectroscopy (XPS) at two times: as received by the manufacturer (AR) and after sputter-cleaning (SC). Traces of several elements were found in all groups, decreasing in favor of the Ti concentration after the sputter-cleaning. Within the limitations of this study, we can conclude that the surface treatment influences the roughness and the average percentage of the trace elements on the implant surface. The cleaning process at the implant surface should be improved by the manufacturer before assembling the implant.

Titanium surface is an important factor in achieving osseointegration during the early wound healing of dental implants in alveolar bone. The purpose of this study was to evaluate sandblasted-etched surface implants to investigate the osseointegration. In the present study, we used two different types of sandblasted-etched surface implants, an SLA™ surface and a Nanoblast Plus™ surface. Roughness and chemical composition were evaluated by a white light interferometer microscope and X-ray photoelectron spectroscopy, respectively. The SLA™ surface exhibited the higher values (Ra 3.05 μm) of rugosity compared to the Nanoblast Plus™ surface (Ra 1.78 μm). Both types of implants were inserted in the femoral condyles of ten New Zealand white rabbits. After 12 weeks, histological and histomorphometric analysis was performed. All the implants were osseointegrated and no signs of infection were observed. Histomorphometric analysis revealed that the bone–implant contact % (BIC) ratio was similar around the SLA™ implants (63.74 ± 13.61) than around the Nanoblast Plus™ implants (62.83 ± 9.91). Both implant surfaces demonstrated a favorable bone response, confirming the relevance of the sandblasted-etched surface on implant osseointegration.

The demand for synthetic graft materials in implant dentistry is rising. This systematic review aims to evaluate the survival rate of dental implants placed simultaneously with bone regeneration procedures using the material β-tricalcium phosphate, one of the most promising synthetic graft materials. The electronic search was conducted in PubMed, Scielo, and the Cochrane Central Register of Controlled Trials. Five randomized clinical trials, one non-randomized controlled clinical trial and four observational studies without control group were include. Implant survival rate and other clinical, radiographic, and histological parameters did not differ from those of implants placed simultaneously with another type of graft material, or placed in blood clots or natural alveolar ridges. Based on the available literature, β-tricalcium phosphate seems to be a promising graft material in implant dentistry. Nevertheless, more randomized clinical trials, with long follow-up periods, preoperative and postoperative CBCT, and histological analysis, are necessary to assess its long-term behavior.

The surface modification by the formation of apatitic compounds, such as hydroxyapatite, improves biological fixation implants at an early stage after implantation. The structure, which is identical to mineral content of human bone, has the potential to be osteoinductive and/or osteoconductive materials. These calcium phosphates provoke the action of the cell signals that interact with the surface after implantation in order to quickly regenerate bone in contact with dental implants with mineral coating. A new generation of calcium phosphate coatings applied on the titanium surfaces of dental implants using laser, plasma-sprayed, laser-ablation, or electrochemical deposition processes produces that response. However, these modifications produce failures and bad responses in long-term behavior. Calcium phosphates films result in heterogeneous degradation due to the lack of crystallinity of the phosphates with a fast dissolution; conversely, the film presents cracks, which produce fractures in the coating. New thermochemical treatments have been developed to obtain biomimetic surfaces with calcium phosphate compounds that overcome the aforementioned problems. Among them, the chemical modification using biomineralization treatments has been extended to other materials, including composites, bioceramics, biopolymers, peptides, organic molecules, and other metallic materials, showing the potential for growing a calcium phosphate layer under biomimetic conditions.

The aim of this study was to assess the dental status (DMFT) in patients with schizophrenia compared with a control group. In this case–control study, 50 patients with schizophrenia attended in the Psychiatric Unit at the Virgen Macarena University Hospital of Seville were compared with 50 people (without systemic diseases and not taking psychotropic drugs) in a control group attended in the School of Dentistry of Seville. Decayed, missing and filled teeth (DMFT) were assessed according to the World Health Organization WHO criteria. Patients with schizophrenia showed a decayed teeth (DT) score of 7.26 ± 5.69 compared with 6.50 ± 4.37 for patients the control group. These differences were significant and suggest that dental caries are most prevalent in patients with schizophrenia. People who smoked showed significantly higher DT scores in both groups. Among patients with schizophrenia, smokers scored 9.34 ± 5.42 compared with 4.38 ± 4.82 for non-smokers. Among the healthy controls, smokers scored 6.88 ± 4.85 compared with 6.12 ± 3.85 for non-smokers (p < 0.05). Patients with schizophrenia showed a missing teeth (MT) score of 9.10 ± 8.56 compared with 5.38 ± 5.14 in control patients. MT scores increased significantly with age and with smoking in both groups of patients (p < 0.05). Patients with schizophrenia showed a filled teeth (FT) score of 1.38 ± 2.70 compared with 2.34 ± 3.48 in control patients. FT differences in gender and smoking habits between patients with schizophrenia and healthy control subjects were statistically significant (p < 0.05). This data, along with the DT scores, suggests that patients with schizophrenia have extensive untreated dental disease. Patients with schizophrenia constitute a high risk population for dental health. This group showed a greater prevalence of decayed and missing teeth and more extensive treatment needs.

Background: Maxillary sinus lift is a well-documented and accepted technique in the rehabilitation of the posterior maxilla. Schneiderian membrane perforation is the most common complication and may occur in between 7% and 56% of cases. Different materials and techniques have been described to achieve reparation of the perforation. The aim of this study was to establish whether the perforation of the Schneiderian membrane and its repair during maxillary sinus lift surgery results in a lower implant survival rate compared to those cases where the membrane has not been perforated. Materials and methods: A systematic review and meta-analysis of studies assessing the survival rate of implants placed in regenerated sinus using the lateral window approach, where the perforation of the Schneiderian membrane occur, was carried out. Statistical analysis was performed with Open Meta-Analyst, calculating the odds ratio of implants placed in perforated sinuses and non-perforated sinuses. Results: Ten articles were included in the qualitative analysis and seven articles in the quantitative analysis or meta-analysis. A total of 1224 maxillary sinus augmentation surgeries were performed without perforation of the Schneiderian membrane and 2725 implants were placed; 62 implants failed during the follow-up period with an overall survival rate of 97.7%. In 480 perforated sinuses, 1044 implants were placed, of which 30 failed; the overall survival rate was 97.1%. There were no significant differences between the implant survival rate of the implants in the two groups (OR = 0.78; CI = 0.49–2.23; p = 0.28 and I² heterogeneity: 0%, p = 0.44). Conclusions: Schneiderian membrane perforation, as long as it is repaired, does not appear to negatively influence implant survival rate. Membrane perforation should not be considered a reason to abort the procedure or an absolute contraindication to implant placement.