1 March 2021 in Review of Scientific Instruments
Avalanche transistor Marx bank circuits (MBCs) are widely used in high voltage repetitive nanosecond pulse generators, but problems exist with respect to increasing the output voltage due to the limited pulsed current. Accordingly, a novel topology based on an avalanche transistor MBC combined with a linear transformer driver is proposed, the latter of which exhibits advantageous stress distribution and modular structure. A four-module prototype with four units in each module is developed in the laboratory. The output characteristics are investigated by varying important parameters such as the main capacitance, the number of conducting units, the number of cascaded modules, and the trigger signal time delay. The test results verify the validity of the proposed topology. For a 50 resistive load, the prototype can generate pulses with an amplitude of 10.9 kV, a rise time of 3.3 ns, and a voltage superposition efficiency of 89%. The topology proposed in this paper may help to provide a method to further improve the output performance of avalanche transistor MBCs.
1 June 2021 in Review of Scientific Instruments
Low-temperature plasma technology is widely used in various industrial fields, which require the plasma to be of large volume, diffuse, and stable. Furthermore, previous studies have shown that better plasma performance has been obtained by using generators with a high voltage, a high repetition rate, a fast rise time, and a short pulse duration. In this paper, a novel topology is proposed for such generators, which is based on magnetic switches and diode opening switches. A prototype is developed, and its output characteristics are investigated by varying essential parameters, such as the load resistance and the power supply voltage. The experimental results show that it can generate pulses with a voltage of 30.6 kV, a rise time of 7.1 ns, a pulse duration of 8.2 ns, and a maximum repetition rate of 12 kHz on a 300 Ω resistive load. The prototype has been successfully used to drive uniform plasma in ambient air. In the proposed topology, a diode is added to make the magnetic cores independent of each other, significantly simplifying the design calculation. It may help develop nanosecond solid-state generators.
1 May 2022 in Review of Scientific Instruments
Pulsed power technology is gradually forming a development trend of civil-military integration, which puts forward more requirements for pulsed power generators. This paper takes magnetic switches (MSs) as the starting point and reviews recent advancements in pulse generators based on MSs. First, the working mechanism of the MS “rapid inductance drop after magnetic core saturation” is analyzed. Second, the basic uses of MSs are introduced with specific examples, namely, magnetic compression unit, saturated pulse transformer, and magnetic delay switches. Then, the typical topologies of pulse generators based on MSs are discussed, including transmission line, Marx, Fitch, linear transformer driver, and semiconductor opening switch pumping circuits. These circuits’ technical characteristics and parameter levels are highlighted. Finally, the existing problems and future development trends of MS-based solid-state pulse generators are discussed.
1 May 2022 in Review of Scientific Instruments
In recent years, several novel avalanche transistor-based power synthesis topologies have been proposed to improve the output performance of pulse generators based on avalanche transistors. The most promising is the topology based on avalanche transistors Marx Bank Circuits (MBCs) and linear transformer driver (LTD). However, it suffers from the same problems as other semiconductor switch-based LTD generators. The greater the number of LTD modules, the higher the requirements for synchronization and drive capability of the trigger system. This paper proposes a new self-triggering topology for pulse generators based on avalanche transistors MBCs and LTD, which significantly simplifies the entire generator's requirement for trigger system synchronization and driving capability. First, the circuit topology and its operation principle are introduced. Then, three prototypes with one trigger LTD module and three self-triggering LTD modules are developed. The output characteristics are experimentally investigated. The results verify the feasibility of the proposed topology. Finally, the output amplitude and the rise time are 3.35 kV/3.7 ns, 4.12 kV/3.7 ns, and 4.88 kV/4.0 ns on a 25 Ω resistive load, respectively. All generators can operate at 1 kHz. The topology proposed in the article maximally simplifies the requirements for synchronization and drive capability of the trigger system for generators based on avalanche transistor MBCs and LTD.
1 March 2022 in Review of Scientific Instruments
The plasma bridge neutralizer (PBN) based on a tungsten filament is a promising technique of a thermionic DC electron source where a hot filament is immersed in an inert gas flow and electrons are “bridged” from a small orifice to the ion beam. PBNs have been widely used in space propulsion and industrial applications due to their relatively simple structure and low power consumption. However, they have well-known disadvantages, namely, low emission current density and short lifetime. In this article, we propose a novel ring-cusp magnetically confined PBN (RCM-PBN) to address these issues. In the RCM-PBN, electrons are confined by a ring-cusp magnetic field, which improves the ionization efficiency and reduces the discharge chamber wall losses. Electrical insulation of the orifice plate from the chamber wall prevents a large number of electrons from being collected by the orifice plate, which greatly improves the extracted electron current. The effects of different operating parameters on the extracted electron current were studied through experiments. It was found that the increase in the extracted electron current with the extraction voltage was related to the anode spot formation. Analysis of the gas utilization factor and electron extraction cost shows that the optimal operating condition was obtained at an argon mass flow rate of 1.2 SCCM and a heater power of 45 W. At its optimum, a stable electron current of 1.1 A was extracted from the RCM-PBN with a gas utilization factor of 12.8 and an electron extraction cost of 143 W/A.
1 February 2023 in Review of Scientific Instruments
With the development of technology, low-temperature plasma plays an increasingly important role in industrial applications. The industrial application of low-temperature plasma has the following requirements for plasma, high electron energy, low macroscopic temperature, and uniformity. Low-temperature plasma driven by nanosecond pulses reflects more significant advantages in these aspects compared to direct current plasma and alternating current plasma. In this paper, a simple topology is proposed, which is based on the pseudospark switch and the diode opening switch. A pulse generator is developed, which can eventually output pulses with an amplitude of 106 kV, a rise time of 15.5 ns, a pulse width of 46 ns, and a maximum repetition rate of 1 kHz on a 260 Ω resistive load. The pulse generator can successfully drive needle-plate discharge plasma in ambient air. It has excellent parameters, stability, compactness, and a long lifetime. The proposed topology may be helpful for nanosecond pulse generators with amplitude ranging from tens to hundreds of kilovolts, which could be widely used in industry.