Ying Wang

Ying Wang

Auto-generated profile, based on publicly available information

Ying Wang

Key Laboratory of Ministry of Education for Wide Bandgap Semiconductor Materials and Devices, School of Microelectronics, Xidian University, Xian, China

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 August 2023 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
YWYing Wang
Ying Wang
XJXi Jiang
Xi Jiang
XSXinlong Shi
Xinlong Shi
QLQifan Liu
Qifan Liu
SZShijie Zhang
Shijie Zhang
XGXiaowu Gong
Xiaowu Gong
The junction temperature is vital for the reliability evaluation and health management in silicon carbide (SiC) MOSFET applications. This article proposes a novel method to estimate the junction temperature under actual operating conditions, using the drain voltage falling edge time ( ${\textit{t}_{\textit{f},\text{edge}}}$ ) as temperature-sensitive electrical parameters (TSEPs). Experimental results show that the proposed circuit can estimate the junction temperature with good linearity, high-temperature sensitivity, and load current independence. Furthermore, the proposed method is verified with the aged SiC MOSFET after the power cycling test. It shows a tiny impact of the bond wire degradation on the junction temperature estimation accuracy.

1 August 2024 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
YWYing Wang
Ying Wang
XJXi Jiang
Xi Jiang
SYSong Yuan
Song Yuan
NMNianlong Ma
Nianlong Ma
RORunze Ouyang
Runze Ouyang
HNHao Niu
Hao Niu
In this article, an innovative layout is introduced to reduce the stray inductance of the multichip power modules (MCPMs) through reverse coupling of current in parallel power loops, which effectively cancels out mutual inductance. A half-bridge silicon carbide (SiC) MOSFET power module was designed based on this novel layout. The fabricated SiC power module was experimentally validated, demonstrating a measured stray inductance of about 3.5 nH. Experimental results confirmed that the proposed module outperforms counterpart commercial SiC MOSFET power modules in terms of turn-off overshoot voltage and switching loss reduction, highlighting the advantage of the reverse-coupling current approach in enhancing power module performance. The principle of enhancing negative mutual inductance and dynamic current sharing in circuits through the reverse coupling parallel loops is discussed.

14 November 2024 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
YWYing Wang
Ying Wang
XJXi Jiang
Xi Jiang
SYSong Yuan
Song Yuan
RORunze Ouyang
Runze Ouyang
NMNianlong Ma
Nianlong Ma
WJWang Jun
Wang Jun
This paper introduces a fully symmetric layout for a 4-parallel SiC MOSFET half-bridge power module, wherein each power loop within the module exhibits physical and electrical symmetry along the x-axis, y-axis, and center. This symmetric layout ensures inductance consistency across the power loops, facilitating balanced current sharing within the power module. The imbalance ratio of inductance across the parallel loops in the proposed module is less than 2%. Further reduction in parasitic inductance is achieved by staggering the power terminals based on the symmetric layout. The optimized power module was fabricated and subjected to static and switching tests, demonstrating balanced current and thermal distribution. Additionally, the parasitic inductance of the proposed power module, calculated based on the double pulse test results, is found to be 3.54 nH, significantly lower than that of commercially available modules of the same rating.

23 May 2023 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
XSXinlong Shi
Xinlong Shi
TLTao Liu
Tao Liu
YWYing Wang
Ying Wang
RCRui Chen
Rui Chen
NZNingning Zhang
Ningning Zhang
Liming WangLiming Wang
Liming Wang
This article presents an evaluation of the CMOS logic performance of a junctionless (JL) forksheet based on 3-D numerical simulation. The study investigates the transfer characteristics and gate capacitance of the JL-forksheet with channel doping ranging from ${1} \times {10}^{{19}}$ to ${6} \times {10}^{{19}}/\text {cm}^{{3}}$ , to determine the optimal performance of the device. Results show that due to its lower gate capacitance, the JL-forksheet has a lower intrinsic delay than the IM-forksheet. Moreover, the JL-forksheet demonstrates improved logic performance in terms of rise time, fall time, propagation delay, and maximum oscillation frequency, with improvements of at least 25%, 35%, 17%, and 21%, respectively, as compared to the IM-forksheet. Based on its simple fabrication process, better power efficiency, and improved digital logic performance at the sub-2 nm technology node (N2), the JL-forksheet exhibits strong potential as a high-performance CMOS logic solution in the post-Moore era.

27 January 2023 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
XSXinlong Shi
Xinlong Shi
TLTao Liu
Tao Liu
YWYing Wang
Ying Wang
RCRui Chen
Rui Chen
NZNingning Zhang
Ningning Zhang
HHHuiyong Hu
Huiyong Hu
In this article, a SiGe shell complementary FET (CFET) composed of an inversion mode (IM) nFET and a junctionless accumulation mode pFET under 2-nm (N2) and 1.5-nm (N1.5) technology nodes was studied for the characteristics of a single device and the CMOS logic circuit using 3-D numerical simulation. A comparison study between Si shell nanosheet and SiGe shell CFET with a Ge mole fraction in the range of 0.5–0.9. Compared with the Si shell nanosheet (NS), the SiGe shell CFET improves the ON-state current, transconductance, transition frequency, and intrinsic delay up to 29%, 32%, 31%, and 21%, respectively. Due to the mobility improvement in SiGe shell CFET, the fall time, rise time, propagation delay, and maximum operating frequency of the $\text {Si}_{{0.5}}\text {Ge}_{{0.5}}$ shell CFET are also improved up to 2%, 43%, 3%, and 3%, respectively, compared with their Si shell counterparts. This SiGe shell CFET has a lower parasitic RC, a smaller layout area, and better analog and digital performance at the sub-2-nm technology node. This makes it a promising architecture for future high-performance CMOS logic applications.

31 October 2024 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
QLQifan Liu
Qifan Liu
XJXi Jiang
Xi Jiang
XGXiaowu Gong
Xiaowu Gong
SYSong Yuan
Song Yuan
LYLinsen Yang
Linsen Yang
ZYZhaoheng Yan
Zhaoheng Yan
Lower power consumption is a primary concern in the design and development of the flyback converter. However, the power consumption of the flyback converter during light loads has not been extensively explored in existing literature. Given the rapid deployment of flyback converters, it is necessary to develop a new technique of reducing power consumption for the flyback converter under light load conditions. This letter introduces a novel power loss reduction approach for flyback converter with average power reduction strategy. A controller IC is fabricated with TSMC 0.5-μm bipolar-CMOS-DMOS (BCD) mixed-signal process. And verified by a prototype experimental test board of 15 W/15 V.