Lezhi Wang

Lezhi Wang

Auto-generated profile, based on publicly available information

Lezhi Wang

Guangdong Ziener Technology Company Ltd., Guangzhou, China

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 January 2018 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
LWLezhi Wang
Lezhi Wang
WKWang Kang
Wang Kang
FEFarbod Ebrahimi
Farbod Ebrahimi
XLXiang Li
Xiang Li
YHYangqi Huang
Yangqi Huang
WZWeisheng ZHAO
Weisheng ZHAO
The processing-in-memory (PIM) paradigm has been considered as a promising alternative to break the bottlenecks of conventional von-Neumann architecture by realizing the unity of data storage and processing in the same die. On the road towards implementing such an architecture, finding a novel memory that can support both dense data storage and efficient logic processing is the critical step. In this letter, we report a voltage-controlled magnetic tunnel junction (MTJ), which is a potential candidate for PIM implementation. Stateful Boolean logic functions can be realized with a single device through the memory-like write/read operations. The device was fabricated and characterized at room temperature. Afterwards, typical Boolean logic operations, e.g., “OR”, “AND” and “NXOR”, were experimentally demonstrated with the fabricated MTJ device. The proposed approach opens up a new way for PIM implementation in spintronic memories.

2 May 2024 in IEEE Transactions on Electron Devices
Verified
Journal Article
Open access
Xiangdong LiXiangdong Li
Xiangdong Li
JZJie Zhang
Jie Zhang
JJJian Ji
Jian Ji
ZCZhibo Cheng
Zhibo Cheng
JWJunbo Wang
Junbo Wang
JZJincheng Zhang
Jincheng Zhang
Traditional GaN HEMTs on silicon suffer relatively low lateral and vertical blocking voltages and thick buffers, which impede their use in $\boldsymbol {\ge }1.2$ -kV applications. In this work, the prototypes of 8-kV GaN HEMTs on 6-in sapphire are successfully fabricated using CMOS-compatible processing. An etch-stop nitride layer AlN in the in situ SiN cap precisely defines the gate dielectric thickness. Au-free low-temperature ohmic contact and metal I are achieved by Ti/AlCu/Ti/TiN, and gate metal is achieved by TiN/Ti/AlCu/Ti/TiN, which significantly reduces the material cost. The high mechanical strength of sapphire results in low nonuniformity and well-controlled warpage, enabling the use of a 1.5- $\boldsymbol {\mu }$ m buffer. The fabricated HEMTs with an ${L}_{\text {GD}}$ of $100~\boldsymbol {\mu }$ m exhibit a low ${R}_{\text {ON}}$ of $52~\boldsymbol {\Omega } \cdot $ mm and a stable ${V}_{\text {TH}}$ of −20 V. Benefiting from high-quality in situ SiN passivation, the dynamic ${R}_{\text {ON}}$ and ${V}_{\text {TH}}$ shift are maintained within 2.5% and 10%, respectively. The OFF-state breakdown voltage (BV) is increased beyond 8 kV using a simple device structure with only two field plates. The proposed low-cost and CMOS-compatible 8-kV GaN HEMTs fabricated on 6-in sapphire highlight an extremely simple epitaxy process, lateral device structure, and processing flow. Therefore, they offer great potential for serving future medium-voltage applications.

15 May 2024 in IEEE Electron Device Letters
Verified
Journal Article
Open access
ZHZhanfei Han
Zhanfei Han
Xiangdong LiXiangdong Li
Xiangdong Li
JJJian Ji
Jian Ji
LCLong Chen
Long Chen
LWLezhi Wang
Lezhi Wang
JZJincheng Zhang
Jincheng Zhang
The ≥ 650 V power electronics market penetration by GaN HEMTs on Si has been impeded by the GaN buffer. Recently, GaN-on-sapphire, a promising solution, attracts great attentions. In this work, p-GaN gate HEMTs are successfully manufactured on 6-inch sapphire by CMOS-compatible process in our pilot line. Device process modules of p-GaN selective etching, low-temperature Ohmic contact, and Al2O3/SiO2 passivation have all be realized. The fabricated $16~\mu $ m– ${L}_{\text {GD}}$ devices with a simplified epitaxy and device structure, feature a low ${R}_{\text {ON}}$ of $14.8~\Omega \cdot $ mm, a high ${V}_{\text {TH}}$ of 2 V, and a high OFF-state breakdown voltage (BV) over 1360 V. Further, the nonuniformity of the ${R}_{\text {ON}}$ and ${V}_{\text {TH}}$ across the 6-inch whole wafer is well controlled. Devices also passed the preliminary reliability assessment of high temperature gate bias (HTGB) stress and high temperature reverse bias (HTRB) stress. The high-reliability, high-uniformity, and low-cost p-GaN gate HEMTs on 6-inch sapphire will probably be a strong driven force for the power electronics market in the near future.

12 November 2018 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
KCKaihua Cao
Kaihua Cao
HLHuisong Li
Huisong Li
WCWenlong Cai
Wenlong Cai
JWJiaqi Wei
Jiaqi Wei
LWLezhi Wang
Lezhi Wang
WZWeisheng ZHAO
Weisheng ZHAO
The temperature dependence of magnetoresistance and switching characterization based on spin transfer torque (STT) effect of perpendicular magnetic tunnel junctions (p-MTJs) with MgO/CoFeB/W/CoFeB/MgO double-interface free layer was studied. The tunneling magnetoresistance (TMR) ratio increases from 95% to 176% for both 84 and 64 nm-diameter p-MTJs, upon decreasing the temperature from 400 to 20 K. This change of TMR is dominated by a steady increase in the resistance of antiparallel state while the parallel state conductance remains almost constant. Switching behavior at various temperatures is investigated for pulse voltage-dependent STT measurements; resistance versus voltage loops for both the switching directions become more symmetric with decreasing temperature. Furthermore, low-temperature measurements of magnetic properties suggest that the effect of stray field for STT becomes weaker as the temperature decreases, which suggests the p-MTJs design for cryogenic memories.

30 May 2024 in IEEE Transactions on Electron Devices
Verified
Journal Article
Open access
JWJunbo Wang
Junbo Wang
Xiangdong LiXiangdong Li
Xiangdong Li
LCLong Chen
Long Chen
TLTong Liu
Tong Liu
ZHZhanfei Han
Zhanfei Han
JZJincheng Zhang
Jincheng Zhang
The two crucial factors of large scale and high voltage can hardly be balanced for the traditional GaN HEMTs on Si substrates. Recently, one promising solution, GaN-on-sapphire, has attracted great attention. However, the commercialized GaN-on-sapphire wafers ever reported are usually 6 in. It is urgent to develop 8-in GaN-on-sapphire to reduce the cost and meet the market demands. In this work, to the best of our knowledge, an 8-in GaN-on-sapphire wafer is demonstrated for the first time. The sheet resistance $\textit{R}_{{\Box}} $ exhibits a wafer-level nonuniformity of 4% and an average value of 310 $\bm\Omega/\Box$ , and the warpage is kept to 30 $\mu $ m, by dedicatedly tuning the 1.98- $\mu $ m buffer stack. The fabricated 200-V HEMTs exhibit a low $\textit{R}_{\biosc{on}}$ of 6.5 $\bm\Omega \cdot\text{mm}$ , a $\textit{V}_{\text{TH}}$ of $-$ 4.2 V, and an OFF-state breakdown voltage above 500 V without any field plate. The electrical mapping visualizes $\textit{R}_{\biosc{on}}$ and $\textit{V}_{\text{TH}}$ distributed in concentric circles across the wafer. Generally, this work demonstrates the feasibility of realizing 8-in GaN-on-sapphire for power electronics applications in the future.

29 October 2024 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
ZCZhibo Cheng
Zhibo Cheng
Xiangdong LiXiangdong Li
Xiangdong Li
LCLong Chen
Long Chen
LWLezhi Wang
Lezhi Wang
ZLZilan Li
Zilan Li
JZJincheng Zhang
Jincheng Zhang
GaN-on-sapphire has recently attracted great attention for power electronics. Although plenty of efforts have already been made in this topic decades ago, but thorough evaluation on the buffer for $\ge$ 1200-V devices are, however, lacking. In this work, two promising buffers, i.e., AlGaN buffer and carbon-doped GaN buffer (C:GaN), are compared. The key results demonstrate that by replacing the AlGaN buffer with C:GaN buffer, the full-widths at half-maximums (FWHMs) of $\omega$ -rocking curves for (002) and (102) planes reduce from 785 and 2421 to 488 and 1240 arcsec, respectively, and the average sheet resistance $\textit{R}_{\Box}$ drops from 501 to 342 $\Omega$ / $\Box$ and its nonuniformity improves from 4.6% to 1.9%. The fabricated high-electron-mobility transistors (HEMTs) exhibit an optimized $\textit{R}_{{\text{ON}}}$ from 22.1 to 16.1 $\Omega \cdot$ mm, a more uniform off-state blocking capability, and an improved dynamic $\textit{R}_{{\text{ON}}}$ degradation from 104% to 50.4%. Capacitance and conductance analysis discovered that an extra group of deep traps is introduced by the AlGaN buffer. Further photoluminescence (PL) spectroscopy unveils a stronger yellow luminescence (YL), corresponding to a higher density of radiation-related defect recombination centers induced by the AlGaN buffer. Overall, this work unambiguously shows the carbon dopants, often used in GaN-on-Si epitaxy, can help to facilitate the commercialization of $\ge$ 1200-V HEMTs on sapphire in the future.