Valerio Orsetti

Valerio Orsetti

Auto-generated profile, based on publicly available information

Valerio Orsetti

FSN-TECFIS-MNF Department at ENEA, Research Center of Frascati, Frascati, Rome, Italy

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 April 2023 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Open access
DPDavide Paloschi
Davide Paloschi
APAndrea Polimadei
Andrea Polimadei
Sanzhar KorganbayevSanzhar Korganbayev
Sanzhar Korganbayev
VOValerio Orsetti
Valerio Orsetti
CMCristina Mazzotta
Cristina Mazzotta
Paola SaccomandiPaola Saccomandi
Paola Saccomandi
Embedding optical fibers with fiber Bragg grating (FBG) sensors in 3D-printed samples can effectively facilitate the systematic use of smart materials in many fields such as civil, bio-medical and soft robotics applications. The aim of the study is to analyze different combinations of filament materials and FBG coatings, and to assess their metrological characteristics. Eighteen samples are fabricated and tested under different mechanical and thermal conditions. The repeated tests allow to perform an evaluation of the measurement repeatability for each sample, along with an analysis of the samples sensitivity. The filaments employed are acrylonitrile butadiene styrene (ABS), polylactic acid (PLA), and thermoplastic polyurethane (TPU). The fiber coatings are acrylate, Ormocer® and polyimide. The fiber coating has no significative influence on the performance of the sensors. The tests for temperature sensitivity highlight a good performance of ABS (116 pm/°C) and TPU samples (32 pm/°C) up to 60 °C, whereas the fabricated PLA samples (139 pm/°C for polyimide, 55 pm/°C for acrylate, 14 pm/°C for Ormocer®) cannot be used above 40 °C. The tests for strain sensitivity in axial elongation show an average sensitivity of 3.049 nm/mm for ABS, 1.991 nm/mm for PLA, 3.726 nm/mm for TPU. The bending tests show that all specimens materials have different sensitivity to elongation (2.994 nm/mm for ABS, 0.668 nm/mm for PLA, 0.149 nm/mm for TPU). Only for acrylate in PLA samples an effective difference for bending sensitivity resulted (1.241 nm/mm for the acrylate coating vs 2.366 nm/mm for the other coatings).

18 August 2022 in Environments
Verified
Journal Article
Open access
PDF file
CSCamillo Sartorio
Camillo Sartorio
MAMassimo Angiolini
Massimo Angiolini
DFDavide Flammini
Davide Flammini
Antonino PietropaoloAntonino Pietropaolo
Antonino Pietropaolo
PAPietro Agostini
Pietro Agostini
GZGiuseppe Zummo
Giuseppe Zummo
The SORGENTINA-RF project aims at developing a 14 MeV fusion neutron source featuring an emission rate in the order of 5–7 × 1013 s−1. The plant relies on a metallic water-cooled rotating target and a deuterium (50%) and tritium (50%) ion beam. Beyond the main focus of medical radioisotope production, the source may represent a multi-purpose neutron facility by implementing a series of neutron-based techniques. Among the different engineering and technological issues to be addressed, the production of incondensable gases and corrosion product into the rotating target deserves a dedicated investigation. In this study, a preliminary analysis is carried out, considering the general layout of the target and the present choice of the target material.