Electrical Engineering and Computer Science (EECS) Department, Biologically Inspired Sensor and Actuator (BioSA) Laboratory, Lassonde School of Engineering,York University, Toronto, ON, Canada
Auto-generated profile, based on publicly available information
Giancarlo Ayala-Charca
Electrical Engineering and Computer Science (EECS) Department, Biologically Inspired Sensor and Actuator (BioSA) Laboratory, Lassonde School of Engineering,York University, Toronto, ON, Canada
Current laboratory diagnostic approaches for virus detection give reliable results, but they require a lengthy procedure, trained personnel, and expensive equipment and reagents; hence, they are not a suitable choice for home monitoring purposes. This paper addresses this challenge by developing a portable impedimetric biosensing system for the identification of COVID-19 patients. This sensing system has two main parts: a throwaway two-working electrode (2-WE) strip and a novel read-out circuit, specifically designed for simultaneous signal acquisition from both working electrodes. Highly reliable electrochemical signal tracking from multiplex immunosensors provides a potential for flexible and portable multi-biomarker detection. The electrodes’ surfaces were functionalized with SARS-CoV-2 Nucleocapsid Antibody enabling the selective detection of Nucleocapsid protein (N-protein) along with self-validation in the clinical nasopharyngeal swab specimens. The proposed programmable highly sensitive impedance read-out system allows for a wide dynamic detection range, which makes the sensor capable of detecting N-protein concentrations between 0.116 and 10,000 pg/mL. This lightweight and economical read-out arrangement is an ideal prospect for being mass-produced, especially during urgent pandemic situations. Also, such an impedimetric sensing platform has the potential to be redesigned for targeting not only other infectious diseases but also other critical disorders.
26 September 2022 in IEEE Transactions on Instrumentation and Measurement
In this article, we propose a novel real-time method to convert standard impedance spectroscopy of an N-shaped negative differential resistance (NDR) system into resonance-like pseudo-impedance spectroscopy. This method relies on the creation of a singularity in the impedance spectra with the frequency, where the real and imaginary parts of the impedance are equal to zero and pure capacitive, respectively. This resonance-like impedance spectrum allows us to monitor a unique frequency related to the electrochemical events at the interface between electrode and sample. The proposed method was validated using an NDR created by an indium tin oxide (ITO) microelectrode array exposed to mouse neuroblastoma cells with two different concentrations $1\times 10^{4}$ and $2\times 10^{4}$ cells/mL. Based on the results and discussions in this article, resonance-like impedance spectroscopy offers advantages for the rapid detection and real-time monitoring of biological and/or chemical NDR systems.
This paper presents a novel real-time resonance-like impedance spectroscopy method using ITO electrodes. These electrodes can exhibit N-Shape Nonlinear Negative Differential Resistance (NDR) under specific conditions. In these conditions, the impedance of the electrode becomes pure capacitive, resulting in a resonance-shape spectrum. The resonance frequency is related to electrochemical changes at the interface between electrode and sample. We validated this method using microfabricated ITO electrodes exposed to two chemical solutions, including DMEM culture medium and 0.9% NaCl Solution. Based on these results, the proposed method can offer great advantages of rapid impedance spectroscopy for high throughput screening of chemical and biological materials suitable for a variety of life sciences applications.
20 November 2024 in IEEE Transactions on Instrumentation and Measurement
This article introduces a new field-effect transistor (FET)-based sensing system designed to monitor charge/polarity changes during the evaporation of microsize water droplets containing polar substances such as ethanol and methanol. The system utilizes a high transconductance interdigital open-gate junction FET (ID-OGJFET) with a sizeable direct-on-channel sensing area (>16 mm2) in direct contact with the liquid droplet. A new electrofluidic package has also been developed to facilitate sample access on the FET chip, which prevents leakage and connects the sensor to readout systems. An experimental procedure is designed to demonstrate the functionality and applicability of this FET platform sensing system for chemical analysis, such as measuring the concentration of ethanol or methanol in water using the evaporation-based sensing mechanism enabled by the ID-OGJFET. Real-time video capture is employed for monitoring and control. The sensor measures ethanol and methanol concentrations ranging from 0% to 100% with steps of 10% EtOH/MetOH in water, utilizing the evaporation-based sensing mechanism and current output of the ID-OGJFET sensor. The minimum meaningful measured concentration is 1% (v/v) for ethanol and 1.49% (v/v) for methanol. The combined uncertainty analysis of methanol’s concentration predictions ranged from 3.29 to 77.91 s. The expanded uncertainty varied from 6.58 to 155.82 s at a 95% confidence level for concentrations from 0% v/v to 100% with 10% intervals. For ethanol, the combined uncertainties ranged from 4.68 to 98.95 s. The expanded uncertainties, calculated with a coverage factor 2, varied from 9.36 to 197.90 s at a 95% confidence level.
This article presents a novel nucleic acid (NA) mass measurement technique utilizing an open-gate junction field-effect transistor (OG-JFET) to quantify the mass of NA molecules. A low-cost, portable readout interface was designed, developed, and characterized to generate transverse I–V characterization curves for the OG-JFET in the presence of NA molecules with nanogram-level mass. The study thoroughly evaluates the functionality of the interface system, which incorporates a custom-built electro-fluidic package specifically designed for measuring the mass of single-strand deoxyribonucleic acid (ssDNA) with a sensitivity of 0.48 ng. The results underscore the system’s key advantages, including portability, affordability, and precision, positioning it as an ideal solution for various applications in life sciences and industry.