17 July 2020 in Management Systems in Production Engineering
In the period of shortage of gas supply, special attention is given to reducing the supply of gas to its consumers, that is, their complete and uninterrupted gas supply. Increasing gas losses associated with technological transportation costs, in particular caused by gas flow instability and frequent changes in gas transmission network operating modes. Considering losses due to unreliability of gas pumping is one of the important tasks of gas supply optimization. The purpose of the study is to develop an optimization mathematical model that will simultaneously take into account the factors of reliability and minimum lossesIn the general case, the optimization calculations of the modes of operation of the main gas pipelines are intended to solve three main problems: determining the maximum productivity, calculating the optimal mode with a given productivity and choosing the optimal strategy, the development of the pipeline. On the basis of approaches of simulation modeling of complex systems, a multi-parameter mathematical model of gas supply process optimization was developed. It is shown that a comparative analysis of the forecast and actual indicators of the operating modes of the plunger gas pumping unit shows their satisfactory convergence. The performance of the compressor operation period in the process of injection according to the forecast deviates from the actual value for the whole period of operation of the plunger gas pumping unit in 2016 by 2.98%. The optimization problem of gas pumping planning is considered, taking into account the expected losses, on the basis of which the transfer of the controlled system from the initial state to the final one is carried out by such a sequence of states that minimizes the total cost of the system evolution.
1 February 2020 in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
Prediction of transient processes in oil pipelines with the purpose of emergency incident prevention
1 January 2020 in Mining of Mineral Deposits
4 May 2022 in Таврійський науковий вісник. Серія: Технічні науки
Оптимізація режимів роботи газотранспортної системи в умовах її роботи з неповним завантаженням має свої особливі підходи і принципи їх реалізації. Особливості процедури оптимізації стосуються насамперед розширення сфери допустимих режимів і відповідно вибору технологічних схем і обладнання газотранспортної системи, адже у разі суттєвого зменшення продуктивності експлуатація можлива за зменшення числа працюючих компресорних станцій чи кількості працюючих газоперекачувальних агрегатів на кожній з них. В умовах неповного завантаження газотранспортної системи суттєве зниження продуктивності (порівняно з пропускною здатністю) призводить до розширення діапазону зміни максимального і мінімального тисків. Граничними варіантами допустимих режимів слід вважати такі: максимальний, що характеризується максимальним значенням тиску на початку лінійної ділянки, і мінімальний, що характеризується мінімальними значенням тиску в кінці лінійної ділянки. Множина всіх решти допустимих режимів перебуває в діапазоні між вказаними граничними. Слід зауважити, що в умовах неповного завантаження газотранспортної системи єдиними критеріями оптимальності режимів роботи можуть служити мінімум енергозатрат на транспортування газу і максимум надійності газопроводу. Керуючись першим з цих критеріїв, можна вибрати принцип оптимізації режимів з вказаної множини допустимих. Другий критерій встановлює оптимальні принципи обслуговування технологічного обладнання та газопроводів газотранспортного комплексу. З метою їх практичної реалізації необхідно виробити стратегічні напрями і методи оптимізації режимів і обслуговування газотранспортної системи в умовах неповного завантаження.
31 August 2021 in Eastern-European Journal of Enterprise Technologies
Prolonged operation of the gas-transport system in conditions of partial loading involves frequent changes in the volume of gas transportation, which necessitates prompt forecasting of system operation. When forecasting the modes of operation of the gas transport system, the main criterion of optimality implies the maximum volume of gas pumping. After all, in this case, the largest profit of the gas-transport company is achieved under the condition of full provision of consumers with energy. In conditions of incomplete loading of the gas-transport system caused by a shortage of gas supply, optimality criteria change significantly. First, the equipment is operated in ranges far from nominal ones which leads to growth of energy consumption. Secondly, changes in performance cause high-amplitude pressure fluctuations at the outlet of compressor stations. Based on mathematical modeling of nonstationary processes, amplitude and frequency of pressure fluctuations at the outlet of compressor stations which can cause the pipeline overload have been established. To prevent this, it was proposed to reduce initial pressure relative to the maximum one. Calculated dependence was obtained which connects the amplitude of pressure fluctuations with the characteristics of the gas pipeline and the nonstationary process. Reduction in energy consumption for transportation is due to the shutdown of individual compressor stations (CS). Mathematical modeling has made it possible to establish regularities of reduction of productivity of the gas-transport system and duration of the nonstationary process depending on the location of the compressor station on the route. With an increase in the number of shutdown compression stations, the degree of productivity decrease and duration of nonstationarity reduces The established patterns and proposed solutions will improve the reliability of a gas-transport system by preventing pipeline overload and reduce the cost of gas transportation by selecting running numbers of shutdown stations with a known decrease in productivity.