Hannes Ramon

Hannes Ramon

Auto-generated profile, based on publicly available information

Hannes Ramon

IDLab Department of Information Technology Ghent University IMEC Ghent Belgium

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 January 2018 in IEEE Photonics Technology Letters
Verified
Journal Article
Closed access
HRHannes Ramon
Hannes Ramon
XYXin Yin
Xin Yin
JBJohan Bauwelinck
Johan Bauwelinck
MVMichael Vanhoecke
Michael Vanhoecke
JVJochem Verbist
Jochem Verbist
POPeter Ossieur
Peter Ossieur
High speed optical interconnects require low-power compact electro-optical transmit modules comprising driver circuits and optical modulators. This paper presents a low power 56 Gb/s non-return-to-zero CMOS inverter based driver in 28nm fully depleted silicon-on-insulator CMOS driving a 46 GHz silicon photonic microring modulator. The driver delivers 1 Vpp to the microring modulator from a 75 mVpp input while only consuming 40mW (710 fJ/bit at 56 Gb/s). The realized transmitter shows 4 dB extinction ratio when running of a 1V supply voltage. Transmission experiments up to 2km of single mode fiber show a bit-error-ratio less than 1 · 10−9 at 56 Gb/s.

29 April 2020 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
MVMichiel Verplaetse
Michiel Verplaetse
JLJoris Lambrecht
Joris Lambrecht
MVMichael Vanhoecke
Michael Vanhoecke
LBLaurens Breyne
Laurens Breyne
HRHannes Ramon
Hannes Ramon
GTGuy Torfs
Guy Torfs
We propose a novel implementation of a complex analog equalization filter for the compensation of frequency-dependent variations in coherent optical links. The analog compensation filter can be used in coherent-lite optical communication links where digital signal processing (DSP) is removed to limit the complexity and power consumption. In these links, the filter can compensate for electrical bandwidth limitations and distortion introduced by chromatic dispersion in the fiber. The complex filter is implemented by combining four distributed analog finite-impulse response (FIR) filters to obtain the necessary response. The filter delays are implemented using active delay cell structures to create a compact solution. The analog filter is implemented in a 55-nm BiCMOS technology and consumes 185-mW core power for five complex filter taps. Performance is evaluated using the S-parameter measurements, noise and linearity measurements, and real-time system experiments using 112-Gb/s 16-QAM-modulated signals.

19 February 2019 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
HRHannes Ramon
Hannes Ramon
JBJohan Bauwelinck
Johan Bauwelinck
JLJoris Lambrecht
Joris Lambrecht
JVJochem Verbist
Jochem Verbist
MVMichael Vanhoecke
Michael Vanhoecke
XYXin Yin
Xin Yin
We present a 70 Gb/s capable optical transmitter consisting of a 50 μm long GeSi electro-absorption modulator (integrated in Silicon Photonics) and a fully differential driver designed in a 55 nm SiGe BiCMOS technology. By properly unbalancing the output stage, the driver can be DC-coupled to the modulator thus avoiding the use of on-chip or external bias-Ts. At a wavelength of 1560 nm, open eye diagrams for 70 Gb/s after transmission over 2 km standard single-mode fiber were demonstrated. The total power consumption is 61 mW, corresponding to 0.87 pJ/bit at 70 Gb/s. Bit-error rate measurements at 50 Gb/s and 56 Gb/s (performed both back-to-back and with up to 2km standard single-mode fiber) demonstrate large (0.4 UI at a BER of $10^{-12}$ ) horizontal eye margins. This optical transmitter is ideally suited for datacenter applications which require densely integrated transceivers with a low power consumption.

13 February 2019 in IEEE Photonics Technology Letters
Verified
Journal Article
Closed access
JLJoris Lambrecht
Joris Lambrecht
HRHannes Ramon
Hannes Ramon
BMBart Moeneclaey
Bart Moeneclaey
JVJochem Verbist
Jochem Verbist
MVMichael Vanhoecke
Michael Vanhoecke
XYXin Yin
Xin Yin

22 July 2019 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
SPStelios Pitris
Stelios Pitris
Miltiadis Moralis-PegiosMiltiadis Moralis-Pegios
Miltiadis Moralis-Pegios
Theonitsa AlexoudiTheonitsa Alexoudi
Theonitsa Alexoudi
YBYoojin Ban
Yoojin Ban
PHPeter De Heyn
Peter De Heyn
Nikos PlerosNikos Pleros
Nikos Pleros
Today, the Datacenter (DC) ecosystems are fueling the demand for novel transmitter (TX) technologies complying to the off-board, on-board and chip-to-chip computing needs. This has set a new class of requirements for the TX infrastructure that should now offer multiple credentials, namely: i) high-speed, ii) O-band operation for avoiding dispersion compensation in long distances, iii) WDM capabilities for higher-throughput and multicasting/broadcasting support, and iv) tight co-packaging with low-power electronics. Silicon photonic (Si) TXs have been extensively studied towards high-speed and WDM TX engines targeting mainly C-band. Only a limited number of Si-Pho O-band TXs have been reported, however with $\leq$ 32 Gb/s/channel line-rate capabilities and with a WDM portfolio that has not been fully explored yet. In this article, we introduce a novel silicon photonic high-speed O-band TX hardware platform that can meet the current datacom and computercom interconnect requirements. We demonstrate a Ring Modulator (RM)-based 4-channel WDM TX at 4 $\times$ 40 Gb/s NRZ operation that supports wavelength parallelism in unicast operation but can also pave the way towards WDM Tx engines for the post-100 GbE transmitter era. Moreover, we present a broadband Si Mach-Zehnder modulator employed in a WDM modulation scheme of 2 $\times$ 25 Gb/s NRZ signals and demonstrate multicasting when combined with an 8 $\times$ 8 passive AWGR wavelength router, addressing the broadcasting needs of traffic usually encountered in cache-coherent multisocket settings. Finally, we further demonstrate the tight synergy of O-band Si-RM modulators with high-speed CMOS electronics, presenting a RM-based TX assembly prototype employing a fully-depleted silicon-on-insulator CMOS driver, delivering 50 Gb/s NRZ operation.

19 December 2017 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
MVMarijn Verbeke
Marijn Verbeke
PRPieter Rombouts
Pieter Rombouts
HRHannes Ramon
Hannes Ramon
JVJochem Verbist
Jochem Verbist
JBJohan Bauwelinck
Johan Bauwelinck
GTGuy Torfs
Guy Torfs
The upcoming 100 Gb/s links in the next-generation ethernet passive optical networks will be based on four channels of 25 Gb/s. The corresponding transceivers in these optical links require a high-speed clock and data recovery circuit to extract a synchronous clock and recover the received data. To achieve a sufficiently fast settling time for 25 Gb/s burst mode upstream applications in passive optical networks (PONs), we introduce an architecture of the first 25 Gb/s all-digital clock and data recovery circuit (AD-CDR). Thanks to the implementation of a digital loop filter, our AD-CDR avoids the need of a system clock or a start-of-burst signal. This circuit is implemented in a 40-nm CMOS process and has a very compact active chip area of only 0.050 mm 2 . Furthermore, the performance of the burst-mode operation of our AD-CDR in an optical setup is measured and reported, resulting in a burst-mode lock time of 37.5 ns and consuming only 46 mW.