29 February 2024 in IEEE Sensors Journal
The miniaturization of low-frequency marine underwater acoustic detection systems presents new requirements for three-dimensional vector hydrophones. Inspired by fish lateral lines, we have introduced a biomimetic three-dimensional vector hydrophone. It features a microstructure with a monolithically integrated four-beam central block and cilium, capable of detecting underwater acoustic signals from three dimensions. Simulations were conducted to determine the natural frequencies and stress of the hydrophone, helping establish the structural parameters. The arrangement of piezoresistors on the four beams was meticulously designed to minimize inter-axis coupling. The hydrophone chip was fabricated using MEMS technology, followed by comprehensive testing. The hydrophone effectively operates within a detection frequency band of 20-500 Hz. The sensitivities for the three axes are -189 dB@500 Hz, -189.6 dB@500 Hz, and -200.9 dB@500 Hz (0 dB=1 V/μPa), respectively. The concave point depths are 30.4 dB, 29.8 dB, and 26.9 dB, with the voltage density of self-noise at -106 dB at 500 Hz. These results indicate that the biomimetic three-dimensional vector hydrophone holds promising prospects for low-frequency underwater acoustic detection applications.
27 February 2024 in IEEE Transactions on Instrumentation and Measurement
The main frequency band of the radiated signals from ships is 20-500Hz, and also the main working frequency band of the Micro-Electro-Mechanical-System ( MEMS ) vector hydrophone. To improve sensitivity in this frequency band, this paper presents a nested package structure, which encapsulates the sensitive sections of the vector hydrophone with a mesh-like interior support and a sound-transparent cap. By COMSOL Multiphysics 6.0 simulation, the particle acceleration and intrinsic frequency of the hydrophone with different interior supports and sound-transparent cap are compared and analyzed. The simulation results show that the hydrophone encapsulated with nylon interior support and latex acoustic cap has higher acceleration, and its intrinsic frequency is 2285.1 Hz in air and 804.64 Hz underwater. The results of the testing indicate that the nested package hydrophone designed in this paper has a bandwidth of 10-800Hz, meeting the main working frequency band of the hydrophone. Additionally, the sensitivity of the hydrophone with latex encapsulation is increased by 7.8dB@100Hz than polyurethane encapsulation. The depth of the notch at 100Hz and 500Hz is more than 30dB, which indicates that the hydrophone has good dipole directivity. Compared with the traditional polyurethane-packaged hydrophone, the nested package structure can effectively improve the performance of the hydrophone.
27 November 2024 in IEEE Sensors Journal
Aiming at the insufficiency of hydrophone for high sensitivity detection in the low-frequency domain, this paper presents for the first time an inertial-type hydrophone encapsulating a MEMS stress-concentrated four-cantilever-beam piezoresistive accelerometer as a vector channel. At the same time, this inertial cilium combined hydrophone (ICCH) also integrates piezoelectric ceramic circular tubes as scalar channels. Combined with the theory of underwater sphere acoustic reception, an inertial combined hydrophone package structure with an outer diameter of 63 mm is designed. The chip of the ICCH vector channel is fabricated by MEMS process, and the effective working frequency band is 10-630 Hz; the sensitivity in the X and Y directions are -175.1dB@500 Hz、-174.8 dB@500Hz (0 dB=1V/μPa), respectively. Compared with the MEMS co-vibration combined hydrophone (CCH), the sensitivity is improved by 8.6 dB. The concave point depths are 44.1 dB and 43.5 dB, respectively, with good cosine directivity. The scalar channel sensitivity is -166.6db@500Hz with omnidirectionality. The error of directional detection in the lake test experiment is less than 3 degrees. The above results show that the hydrophone can meet the need for precise localization and has a broad application prospect in low-frequency hydroacoustic detection.
19 June 2025 in Measurement
6 February 2026 in IEEE Transactions on Instrumentation and Measurement
Cilium-based micro-electromechanical system (MEMS) vector hydrophones are critical in underwater acoustic detection, but their performance is highly sensitive to cilium geometry. Traditional trial-and-error methods are inefficient under complex constraints. This study presents an optimization approach using the constrained optimization by linear approximation (COBYLA) algorithm, combined with multiphysics finite element analysis, to improve sensitivity while precisely controlling the first-order characteristic frequency (FOCF). The cilium is parameterized with a seven-node interpolation curve, and an acoustic-structural coupled model is built in COMSOL. Under a 1000-Hz FOCF constraint, the maximum stress at the beam (MSB) is selected as the optimization objective. COBYLA enables automatic iterative shape optimization with real-time performance feedback. Simulation results show a frequency deviation of less than 0.17% and a 21.3 dB@1-kHz improvement in sensitivity. A prototype fabricated using MEMS and 3-D printing technologies was tested in a standing wave tube, yielding a measured linear bandwidth of the sensor of 1000 Hz and a sensitivity of −175.8 dB@1 kHz re 1 V/ $\mu $ Pa, matching simulation predictions. Meanwhile, the fabricated sensor demonstrated stable operation after withstanding a 100-g shock and a hydrostatic pressure of 7 MPa. This work demonstrates a high-efficiency, high-accuracy framework for MEMS hydrophone design, offering enhanced performance in complex underwater acoustic environments.
1 March 2026 in Defence Technology