This article presents a comprehensive study on the physical, mechanical, thermal, and chemical properties of polypropylene (PP) composites reinforced with hemp fibers (HF) and compatibilized with maleic anhydride (MAPP). The composites were processed using a twin-screw extruder, followed by hot compression at 190 °C. Subsequently, the composites were analyzed using Izod impact and Shore D hardness tests to evaluate their mechanical properties. Thermal properties were investigated through differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), while X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR) were employed to study their chemical properties. Additionally, a statistical analysis was conducted to compare the average results of the impact and hardness tests. XRD analysis revealed that the addition of HF and MAPP led to the disappearance of peaks corresponding to the beta phase in pure PP. Hemp fibers exhibited an impressive crystallinity of 82.10%, surpassing other natural fibers, and had a significant molecular orientation angle (MFA) of 6.06°, making them highly desirable for engineering applications. The crystallite size was observed to be relatively large, at 32.49 nm. FTIR analysis demonstrated strong interactions between the fiber, compatibilizing agent, and polymer matrix. TGA tests showed that the addition of 5 and 10 wt.% MAPP resulted in complete degradation of the composites, similar to pure PP. DSC analyses indicated a reduction in crystallinity (Xc) due to the incorporation of HF and MAPP. Shore D hardness tests revealed an increase in hardness with the addition of 5 wt.% MAPP, while a steep decline in this property was observed with 10 wt.% MAPP. In terms of impact resistance, fractions of 3 and 5 wt.% MAPP in the composites exhibited improved performance compared to the pure polymer. Analysis of variance (ANOVA) was employed to ensure the statistical reliability of the mechanical test results. This comprehensive study sheds light on the diverse properties of PP composites reinforced with hemp fibers and compatibilized with MAPP, emphasizing their potential as sustainable materials for engineering applications. The results contribute to the understanding of the structural and functional aspects of these composites, guiding future research and developments in the field.
The constant concern about environmental issues has led to the growth of researches about eco-friendly materials. Among them, the natural lignocellulosic fibers have already presented their potential in place of petroleum-based synthetics. However, a relevant number of studies still have to deal with their disadvantages, such as the weak bond on the matrices for a composite performance and limited thermal performance. Thus, the present study analyzes a combination of alkaline treatment and graphene oxide coating in hemp fibers, an NLF applied in several products but with few investigations in engineering applications. The hemp fibers were thermally characterized with thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The GO-coating was evidenced by the Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy. Changes in crystallinity were presented by X-ray diffraction (XRD). It was observed an increase of about 4% to 11% of the crystallinity after the alkaline treatment. The thermal stability rose about 13°C in the 10 wt% NaOH-treated and GO-coated fibers, and a change of about 3.5°C was detected for the glass transition temperature. The GO-coating effect was also evidenced by changes in Raman spectra and FTIR curves and was visually detected in the scanning electron microscope (SEM).
Natural fiber reinforced polymer composites have recently been investigated as a component of multilayered armor system (MAS). These composites were found to present advantages when replacing conventional high strength synthetic aramid fabric laminate composite (KevlarTM, with same thickness, as MAS second layer. Continuous and loose natural fibers were up to now mostly used to reinforce these ballistic composites. Only two natural fabrics reinforced polymer composite were so far used with same purpose. Therefore, this work investigated the possibility of substituting KevlarTM for three other natural fabrics, based on mallow and jute fibers, as reinforcement of epoxy composites. Fabrics made of either pure mallow, or 70%mallow/30% jute or 50%mallow/50% jute fibers were separately mixed with epoxy to produce laminate composite plates. These plates were set as second layer of Al2O3/Nb2O5 front ceramic MAS, that were ballistic tested against relatively high energy 7.62 mm ammunition. Indentation depth values caused by the bullet penetration in clay witness, simulating human body behind the MAS, were always found to be below the safety standard limit. These indentation values were similar to those obtained in MAS with KevlarTM as second layer. However, significant economical advantages favor the investigated natural fabric composites over the synthetic Kevlar.
2 August 2017 in Metallurgical and Materials Transactions A