We report on the production of ordered assemblies of silicon nanostructures by means of irradiation of a Si (100) substrate with 1.2 keV Ar+ ions at normal incidence. Atomic force and high-resolution transmission electron microscopies show that the silicon structures are crystalline, display homogeneous height, and spontaneously arrange into short-range hexagonal ordering. Under prolonged irradiation (up to 16 h) all dot characteristics remain largely unchanged and a small corrugation develops at long wavelengths. We interpret the formation of the dots as a result of an instability due to the sputtering yield dependence on the local surface curvature.

We have studied the influence of InP buffer-layer morphology in the formation of InAs nanostructures grown on InP(001) substrates by solid-source molecular-beam epitaxy. Our results demonstrate that when InP buffer layers are grown by atomic-layer molecular-beam epitaxy, InAs quantum dot-like structures are formed, whereas InP buffer layers grown by MBE produce quantum-wire-like structures. The optical properties of these corrugated structures make them potential candidates for their use in light-emitting devices at 1.55 μm.

We report on the production of nanoscale patterning on Si substrates by low-energy ion-beam sputtering. The surface morphology and structure of the irradiated surface were studied by atomic force microscopy (AFM) and high-resolution transmission electron microscopy (HRTEM). Under ion irradiation at off-normal incidence angle (∼50◦), AFM images show the formation of both nanoripple and sawtooth-like structures for sputtering times longer than 20 min. The latter feature coarsens appreciably after 60 min of sputtering, inducing a large increase in the surface roughness. This behaviour is attributed to the preferential direction determined on the substrate by the ion beam for this incidence angle, leading to shadowing effects among surface features in the sputtering process. Under irradiation at normal incidence, the formation of an hexagonal array of nanodots is induced for irradiation times longer than 2 min. The shape and crystallinity of the nanodots were determined by HRTEM. At this incidence angle, the surface roughness is very low and remains largely unchanged even after 16 h of sputtering. For the two angle conditions studied, the formation of the corresponding surface structures can be understood as the interplay between an instability due to the sputtering yield dependence on the local surface curvature and surface smoothing processes such as surface diffusion.