27 June 2023 in IEEE Access
This article present high efficient electromagnetic energy harvesting system for low frequency applications. The proposed circuit is composed of two stages. In the first stage electromagnetic (EM) rectifier uses an improved rectifier structure with active diodes powered internally by a passive ac-dc positive and negative voltage quadrupler. This boost input peak voltage 0.6 V to +0.8 V and -0.8 V and power internally unbalance-size comparators (Comp_1 and Comp_2). The unbalance size comparator minimize the delay by introducing input offset in order to minimize the reverse leakage current. Due to this, the efficiency is improved to 95.6% at 0.6 mA load current. The second stage is step up dc-dc converter with proposed soft start circuit and min-max duty generator circuit. The proposed soft start circuit prevent dc-dc converter circuit from inrush current. The inrush current reduce the efficiency of dc-dc converter and can drain out the battery energy. In order to avoid undesirable feedback voltage, the dc-dc converter uses a min-max duty generator. The high-side and low-side driver control signals are generated by a dead-time generator to avoid the high-side and low-side power switches operating simultaneously. The step-up converter is designed by using 130 nm CMOS technology. The input voltage of dc-dc is the output of EM rectifier, which is 1V and output voltage is 1.3V at 0.5mA load current. The efficiency of step-up dc-dc converter is 94.2% and the system efficiency is 90% at 10 Hz frequency.
16 September 2024 in IEEE Access
This paper presents the application of Artificial Intelligence (AI) to automate the intricate process of designing Sigma-Delta Analog-to-Digital Converters (SD-ADC). It explores the integration of Artificial Neural Networks (ANN) to augment the design, optimization, and operation of Sigma Delta Modulators (SDM). The core concept focuses on training ANN models to achieve the optimal design parameters for SD-ADCs. Traditional SD-ADC design approaches typically involve an iterative simulation process, wherein circuit design parameters are adjusted until the desired performance is achieved. However, this approach can be time-consuming and computationally demanding, especially when dealing with the complex SD-ADCs architectures. In response, this article proposes an alternative by replacing this manual process with the assistance of ANN models. The Proposed methodology comprises two phases. In Phase 1, the trained ANN model predicts the SD-ADC output parameters, while Phase 2 focuses on estimating the optimal input design parameters of the SD-ADC. Remarkably, the circuit’s desired parameters are derived from ANN model predictions rather than the traditional method at the architectural level. The comparative analysis between ANN, Machine Learning (ML), and traditional optimization models is performed to validate the effectiveness of the proposed model.
14 February 2025 in IEEE Access
This paper presents a comprehensive exploration of a Hybrid Energy Harvesting System designed to harvest energy from diverse sources, including 2.4 GHz and 5.8 GHz RF energy, electromagnetic (EM) energy, solar energy, and triboelectric energy. The proposed converter operates within a wide input voltage range, maximizing efficiency and stability. A reconfigurable RF-DC converter is used for both 2.4 GHz and 5.8 GHz frequencies to achieve high power conversion efficiency at low input power level. A maximum of 52 % and 44.8 % PCE is achieved at −14 dBm and −2 dBm respectively. Electromagnetic rectifier produces an output voltage of 1 V with a PCE of 95.6 % which operates with a 15 Hz input frequency. The voltage of the tribo rectifier is limited by the limiter circuit to 2.5 V with a PCE of 96 % concerning load current. A voltage combiner is used to combine all these harvested voltages and pass them to the buckboost DC-DC converter. This hybrid energy harvesting system is designed and fabricated in 180 nm bipolar-CMOSDMOS (BCD) technology with an active area of 2.8mm $\times 2.5$ mm. The buck-boost DC-DC converter incorporated into our hybrid energy harvesting system achieves an impressive peak Power Conversion Efficiency (PCE) of 95 %. This innovative system integrates EM, solar, triboelectric, and RF energy harvesters, collectively ensuring a reliable power source. The ultimate goal is to deliver a steady 5 V DC voltage, skillfully regulated by the buck-boost DC-DC converter.