YOUNG GUN PU

YOUNG GUN PU


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 May 2020 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
Arash HejaziArash Hejazi
Arash Hejazi
SOSeongJin Oh
SeongJin Oh
MRMuhammad Riaz Ur Rehman
Muhammad Riaz Ur Rehman
RRReza E. Rad
Reza E. Rad
SKSungJin Kim
SungJin Kim
Kang-Yoon LeeKang-Yoon Lee
Kang-Yoon Lee
This paper presents a low power, all-digital multichannel Time to Digital Converter (TDC) for Light Detection and Ranging (LiDAR) sensors. The proposed TDC architecture here, measures the time interval through a coarse counter, middle, and fine delay line based interpolation technique (the Nutt method). Automatic calibration by middle and fine All Digital Delay Locked Loops (ADDLL) is provided to ensure the stability of the generated time-slots. Charge pump, loop filter, and voltage-controlled delay line inside the conventional analog Delay Locked Loops (DLL) are replaced by an Accumulator (ACC) and Digitally Controlled Delay Line (DCDL). This makes the design particularly compact, low power, and suitable for multichannel applications. The presented architecture can generate information for amplitude variation (Walk Error) compensation. This information is generated by measuring the pulse width and position of three successive STOP pulses inside each channel within a single-shot measurement. A low-jitter Injection Locked Frequency Multiplier (ILFM) generates 625 MHz internal clock signal out of 25 MHz external reference oscillator, which shrinks the number of delay elements to cover one period of the reference clock and improves the precision of the TDC. Operation at higher frequency provides high throughput and short conversion time (less than 3ns). The three-level TDC offers 13.1 μs maximum input range and 50 ps resolution. The measured DNL and INL of the TDC circuit are 0.47 and 0.71 LSB, respectively. The TDC circuit is implemented in a 180 nm standard CMOS process with a die size of 1.5 mm × 1.5 mm. The total power consumption of the multichannel TDC is 87.6 mW.

6 April 2021 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
DKDanial Khan
Danial Khan
SOSeong-Jin Oh
Seong-Jin Oh
SYSungku Yeo
Sungku Yeo
YRYoungho Ryu
Youngho Ryu
SISol-Hee In
Sol-Hee In
Kang-Yoon LeeKang-Yoon Lee
Kang-Yoon Lee
This article presents a power-efficient hybrid energy-harvesting system that scavenges energy from solar, vibration, and radio frequency (RF) energy sources and converts into regulated output dc voltage courtesy buck–boost dc–dc converter. The proposed architecture incorporates tetra-paths for maintaining high power conversion efficiency (PCE) over extended input power range (−10 to 30 dBm). A time-domain maximum power point tracking technique is proposed for solar energy harvester. A high-efficiency full wave rectifier is designed for triboelectric rectifier. A 5.8-GHz RF-dc converter with adaptive matching is proposed to increase dynamic range of the input power. The chip is implemented in 0.18-µm bipolar-CMOS-DMOS process. The die area of the chip is 2.8 mm × 5.0 mm, including the pads. The solar and triboelectric energy harvesters achieve a measured peak efficiencies of 75.4% and 92.3%, respectively. The high-power 5.8-GHz RF-dc converter achieves measured PCE of 76% at 30 dBm input power. The low-power dual-band RF-dc converter operating at 900 MHz and 2.4 GHz obtains measured peak efficiencies of 73% and 71.9% at 0 dBm input, respectively. The buck–boost dc–dc converter employed in the proposed hybrid energy harvesting system achieves a measured peak PCE of 94.5%.

14 September 2020 in Sensors
Verified
Journal Article
Open access
PDF file
IAImran Ali
Imran Ali
MAMuhammad Asif
Muhammad Asif
KSKhuram Shehzad
Khuram Shehzad
MRMuhammad Riaz Ur Rehman
Muhammad Riaz Ur Rehman
DKDong Gyu Kim
Dong Gyu Kim
Kang-Yoon LeeKang-Yoon Lee
Kang-Yoon Lee
Recently, piezoresistive-type (PRT) pressure sensors have been gaining attention in variety of applications due to their simplicity, low cost, miniature size and ruggedness. The electrical behavior of a pressure sensor is highly dependent on the temperature gradient which seriously degrades its reliability and reduces measurement accuracy. In this paper, polynomial-based adaptive digital temperature compensation is presented for automotive piezoresistive pressure sensor applications. The non-linear temperature dependency of a pressure sensor is accurately compensated for by incorporating opposite characteristics of the pressure sensor as a function of temperature. The compensation polynomial is fully implemented in a digital system and a scaling technique is introduced to enhance its accuracy. The resource sharing technique is adopted for minimizing controller area and power consumption. The negative temperature coefficient (NTC) instead of proportional to absolute temperature (PTAT) or complementary to absolute temperature (CTAT) is used as the temperature-sensing element since it offers the best temperature characteristics for grade 0 ambient temperature operating range according to the automotive electronics council (AEC) test qualification ACE-Q100. The shared structure approach uses an existing analog signal conditioning path, composed of a programmable gain amplifier (PGA) and an analog-to-digital converter (ADC). For improving the accuracy over wide range of temperature, a high-resolution sigma-delta ADC is integrated. The measured temperature compensation accuracy is within ±0.068% with full scale when temperature varies from −40 °C to 150 °C according to ACE-Q100. It takes 37 µs to compute the temperature compensation with a clock frequency of 10 MHz. The proposed technique is integrated in an automotive pressure sensor signal conditioning chip using a 180 nm complementary metal–oxide–semiconductor (CMOS) process.

21 February 2018 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
SOSeongJin Oh
SeongJin Oh
SKSungJin Kim
SungJin Kim
IAImran Ali
Imran Ali
TNTruong Thi Kim Nga
Truong Thi Kim Nga
DLDongsoo Lee
Dongsoo Lee
Kang-Yoon LeeKang-Yoon Lee
Kang-Yoon Lee
This paper presents a low-power frequency-shift keying (FSK) transmitter (TX) with an all-digital phase locked loop (ADPLL) based on direct modulation for use in Bluetooth low energy application. A low power ADPLL with a Retimer, 2-stage time to digital converter, and gain estimation technique is proposed to achieve low-power direct FSK modulation at 1 Mbps data rate. A high-efficiency class-D power amplifier, with dual output power modes and a ramping digital filter (RDF), is proposed to reduce the spurious tones. The proposed TX is implemented on 1P6M 55-nm CMOS technology with a die size of 0.53 mm². The phase noise is -119 dBc/Hz at a 1 MHz offset with frequency of 2.44 GHz. TX output power levels of 1.6 and 10 dBm have a power consumption of 3.9 and 18 mW, respectively. The power control ranges for the 1.6 and 10 dBm modes are 25 and 23 dB, respectively. With the RDF, when the output level is +1.6 dBm, the second, and third harmonic distortions at the TX output are -44 and -49 dBm, respectively. The proposed TX achieves an error vector magnitude of 3.48% at an output power level of +1.6 dBm.

6 July 2020 in Electronics
Verified
Journal Article
Open access
PDF file
DVDeeksha Verma
Deeksha Verma
KSKhuram Shehzad
Khuram Shehzad
DKDanial Khan
Danial Khan
SKSung Jin Kim
Sung Jin Kim
YPYOUNG GUN PU
YOUNG GUN PU
Kang-Yoon LeeKang-Yoon Lee
Kang-Yoon Lee
A design of low-power 10-bit 1 MS/s asynchronous successive approximation register analog-to-digital converter (SAR ADC) is presented in this paper. To improve the linearity of the digital-to-analog converter (DAC) and energy efficiency, a common mode-based monotonic charge recovery (CMMC) switching technique is proposed. The proposed switching technique consumes only 63.75 CVREF2 switching energy, which is far less as compared to the conventional switching technique without dividing or adding additional switches. In addition, bootstrap switching is implemented to ensure enhanced linearity. To reduce the power consumption from the comparator, a dynamic latch comparator with a self-comparator clock generation circuit is implemented. The proposed prototype of the SAR ADC is implemented in a 55 nm CMOS (complementary metal-oxide-semiconductor) process. The proposed architecture achieves a figure of merit (FOM) of 17.4 fJ/conversion, signal-to-noise distortion ratio (SNDR) of 60.39 dB, and an effective number of bits (ENOB) of 9.74 bits with a sampling rate of 1 MS/s at measurement levels. The implemented SAR ADC consumes 14.8 µW power at 1 V power supply.

9 August 2023 in IEEE Transactions on Power Electronics
Verified
Journal Article
Open access
JJJong Wan Jo
Jong Wan Jo
DYDae-Han Yu
Dae-Han Yu
YPYOUNG GUN PU
YOUNG GUN PU
YJYeon Jae Jung
Yeon Jae Jung
SKSeokkee Kim
Seokkee Kim
Kang-Yoon LeeKang-Yoon Lee
Kang-Yoon Lee
This paper presents a DC-DC boost converter for energy harvesting. The time-domain maximum power point tracking (MPPT) technique implements to maximize the source's energy harvesting performance with no additional switch and time slot. Furthermore, it is implementing digital self-tracking zero current detectors (ST-ZCD) for high efficiency. This DC-DC boost converter fabricates with a 180nm CMOS process. The input voltage of the boost converter ranges from 0.2 to 0.7V and generates the output voltage of 1.2V. The total area of this converter with the MPPT operation is 600 μm x 475 μm. The measured power conversion efficiency of this DC-DC boost converter is 85.5%.