Barend van Liempd

Barend van Liempd

Auto-generated profile, based on publicly available information

Barend van Liempd

IMEC, Leuven, Belgium

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 January 2021 in IEEE Access
Verified
Journal Article
Open access
Carlos Morais de LimaCarlos Morais de Lima
Carlos Morais de Lima
DBDidier Belot
Didier Belot
Rafael BerkvensRafael Berkvens
Rafael Berkvens
ABAndre Bourdoux
Andre Bourdoux
Davide DardariDavide Dardari
Davide Dardari
HWHenk Wymeersch
Henk Wymeersch
Herein, we focus on convergent 6G communication, localization and sensing systems by identifying key technology enablers, discussing their underlying challenges, implementation issues, and recommending potential solutions. Moreover, we discuss exciting new opportunities for integrated localization and sensing applications, which will disrupt traditional design principles and revolutionize the way we live, interact with our environment, and do business. Regarding potential enabling technologies, 6G will continue to develop towards even higher frequency ranges, wider bandwidths, and massive antenna arrays. In turn, this will enable sensing solutions with very fine range, Doppler, and angular resolutions, as well as localization to cm-level degree of accuracy. Besides, new materials, device types, and reconfigurable surfaces will allow network operators to reshape and control the electromagnetic response of the environment. At the same time, machine learning and artificial intelligence will leverage the unprecedented availability of data and computing resources to tackle the biggest and hardest problems in wireless communication systems. As a result, 6G will be truly intelligent wireless systems that will provide not only ubiquitous communication but also empower high accuracy localization and high-resolution sensing services. They will become the catalyst for this revolution by bringing about a unique new set of features and service capabilities, where localization and sensing will coexist with communication, continuously sharing the available resources in time, frequency, and space. This work concludes by highlighting foundational research challenges, as well as implications and opportunities related to privacy, security, and trust.

14 January 2021 in IEEE Internet of Things Journal
Verified
Journal Article
Closed access
MMMarco Mercuri
Marco Mercuri
GSGiulia Sacco
Giulia Sacco
RHRainer Hornung
Rainer Hornung
PZPeng Zhang
Peng Zhang
HVHubregt J. Visser
Hubregt J. Visser
TTTom Torfs
Tom Torfs
A single-input and single-output (SISO) frequencymodulated continuous wave (FMCW) radar architecture is proposed and in vivo demonstrated for remote two-dimensional (2-D) localization (range and angular information) and vital signs monitoring of multiple subjects. The radar sensor integrates two frequency scanning antennas which allow angular separation and enable determining a 2-D map (range vs. angle) of a room environment from which people can be distinguished from objects and clutter. After technical tests to validate the functionality of the proposed architecture and data processing algorithm, a practical setup was successfully demonstrated to locate human volunteers, at different absolute distances and orientations, and to retrieve their respiratory and heart rate information. Experimental results show that this radar sensor can monitor accurately the vital signs of multiple subjects within typical room settings, reporting maximum mean absolute errors of 0.747 breaths-perminute and 2.645 beats-per-minute respectively for respiration rate and heartbeat. Practical applications arise for Internet of Things (IoT), ambient assisted living, healthcare, geriatric and quarantine medicine, automotive, rescue and security purposes.

12 October 2016 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
BLBarend van Liempd
Barend van Liempd
BHBenjamin Hershberg
Benjamin Hershberg
SASaneaki Ariumi
Saneaki Ariumi
KRKuba Raczkowski
Kuba Raczkowski
KBKarl-Frederik Bink
Karl-Frederik Bink
JCJan Craninckx
Jan Craninckx
An electrical-balance duplexer achieving the state-of-the-art linearity and insertion loss (IL) performance is presented, enabled by a partially depleted RF silicon-on-insulator CMOS technology. A single-ended configuration avoids the common-mode isolation problem suffered by topologies with a differential low-noise amplifier. Highly linear switched capacitors allow for impedance balancing to antennas with <1.5:1 voltage standing wave ratio from 1.9 to 2.2 GHz. +70-dBm input-referred third-order intercept point is achieved under high transmitter (TX) power (+30.5 dBm max.). TX IL is <3.7 dB, and receiver IL is <3.9 dB.

30 January 2018 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
GQGengzhen Qi
Gengzhen Qi
BLBarend van Liempd
Barend van Liempd
PMPui-In Mak
Pui-In Mak
RMRui P. Martins
Rui P. Martins
JCJan Craninckx
Jan Craninckx
This paper proposes a surface-acoustic wave (SAW)-less tunable RF front end (RF-FE) using an electrical-balance duplexer (EBD) integrated with a switched-LC N-path low-noise amplifier (LNA). The EBD cancels the transmitter-receiver (TX-RX) leakage at the RX frequency by dynamically optimizing the balance of a hybrid transformer, which enables in-band full-duplex (IBFD) operation. A transconductor-based LNA in parallel with a switched-LC N-path network creates input and output notches to reject TX leakage for frequency-division duplexing (FDD) operation. The LNA's signal-handling capability is enhanced via optimum switch biasing. Fabricated in 0.18-μm SOI CMOS, the RF-FE offers >50-dB tunable rejection from the TX port to LNA output at both TX and RX frequencies, for all 3GPP bands from 0.7 to 1 GHz (i.e., FDD case). It is the first tunable RF-FE including an LNA that achieves +70-dBm TX-path IIP₃, and <-100-dBm IM₃ at +20-dBm TX power when a full-duplex spaced jammer is applied at the antenna (FDD case). It is also the first to handle >+30-dBm in-band TX power while cancelling the self-interference by >50 dB (i.e., IBFD case). The RF-FE consumes 62.5 mW at 1 GHz with 11.7-dB RX cascaded NF, 3.6-dB TX insertion loss, and 9.62 mm² active area.

21 March 2022 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
SPSehoon Park
Sehoon Park
DPDae-Woong Park
Dae-Woong Park
KVKristof Vaesen
Kristof Vaesen
AKAnirudh Kankuppe
Anirudh Kankuppe
SSSiddhartha Sinha
Siddhartha Sinha
JCJan Craninckx
Jan Craninckx
This article presents a 135–155-GHz low-power and high-efficiency frequency multiply-by-9 (x9) frequency-modulated continuous-wave (FMCW) radar transmitter (TX). Starting from a 16-GHz frequency-chirping input signal, cascaded frequency triplers at $V$ -band (40–75 GHz) and $D$ -band (110–170 GHz) bring the signal to the $D$ -band, subsequently amplified and radiated via a power amplifier (PA) and an on-chip antenna at $D$ -band. The $D$ -band PA with a reduced gain of transistors at $f_{\max }$ /2 proposes a broadband gain-boosting technique, achieving a maximum achievable gain ( $G_{\max }$ ) for broad frequency range with high-order embedding passives. The x9 chain proposes phase-controlled frequency triplers that align the phase of each harmonic contribution and boost the third harmonic output power, conversion gain, and dc-to-RF efficiency. Implemented in a 28-nm CMOS process, the TX achieves a measured effective isotropic radiated power (EIRP) of 9.4 dBm, a dc-EIRP efficiency of 16.6% while exhibiting an antenna gain de-embedded output power of 7.1 dBm, and a dc-to-RF efficiency of 9.7% with less than 77-mW dc power consumption.

23 February 2021 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
BHBenjamin Hershberg
Benjamin Hershberg
DDDavide Dermit
Davide Dermit
BLBarend van Liempd
Barend van Liempd
EMEwout Martens
Ewout Martens
NMNereo Markulic
Nereo Markulic
JCJan Craninckx
Jan Craninckx
A 4x interleaved pipelined ADC for direct-RF sampling applications is presented. It leverages the performance advantages of ring amplifiers to unlock greater architectural freedom. The first pipeline stage MDAC with a ``passive-hold'' mode eliminates the sub-ADC sampling path and associated problems. A high-speed ringamp topology employs digital bias control, robust common-mode feedback (CMFB), and an elegant self-resetting behavior. An asynchronous, event-driven timing control system improves several aspects of performance and enables fully dynamic power consumption and modular design re-use. A general technique is presented whereby the signal-to-distortion ratio (SDR) of any amplifier in the system can be measured in the background with an analog hardware overhead of only one comparator. In this amplifier-intensive architecture utilizing 36 ringamps, the 4-GS/s ADC fabricated in 16-nm CMOS achieves 62-dB SNDR and 75-dB SFDR at Nyquist, consumes 75 mW (including input buffer), and has a Walden figure of merit (FoM) of 18 fJ/conversion-step and a Schreier FoM of 166 dB, advancing the state of the art in direct-RF sampling ADCs by roughly an order of magnitude.