Fast start-up crystal oscillators (XOs) based on energy injection with an auxiliary oscillator (AO) are efficacious in improving the energy consumption of duty-cycled the Internet of Things (IoT) devices. Nonetheless, the frequency mismatch ( ${\Delta } {F}$ ) between the injection frequency and the crystal’s resonance frequency restrains the injection efficiency and start-up improvement. This work presents an automatic phase-error correction (APEC) technique for automatically correcting the phase error incurred due to ${\Delta } {F}$ up to $10{^{4}}$ ppm and safeguarding the XO start-up performance. An inflection detector (ID) based on a dynamic comparator (DCMP) traces the crystal resonant signal’s peak points and selects the appropriate signals for injection. We fabricated the proposed fast start-up XO in a 40-nm CMOS process. It achieves a start-up time of $17.5~{\mu }$ s with a 16-MHz crystal and a 1.0-V ${V} {_{\text {DD}}}$ . Furthermore, the start-up time only varies by ±1.42% over a ${\Delta } {F}$ of ${\pm } 10{^{4}}$ ppm, and ±4.5% amid temperature variations (−40°C to $85~{^{\circ }}$ C), evincing the robustness of the proposed technique. The power consumption and phase noise in the steady state are $84~{\mu }$ W and −139 dBc/Hz at 1-kHz offset, respectively.
24 February 2026 in IEEE Transactions on Circuits and Systems I: Regular Papers
This article presents a 24-MHz fast startup crystal oscillator (XO) with a phase-interpolator-assisted synchronized injection technique. The technique ensures phase consistency between the injection source and the crystal resonance, even with a 2% injection-$\Delta F$ , enhancing the robustness of the startup under different PVT conditions. Additionally, we propose a differential peak detection technique to detect the phase error incurred by $\Delta F$ . Such a peak detection technique shortens the auxiliary non-injection period during startup to merely four cycles, thereby maximizing the injection percentage to 97.4% and enhancing the startup’s efficacy. Fabricated in the 40-nm CMOS process, the XO achieves a 6.9-$\mu $ s startup time (166 cycles) with a startup energy of 4.8 nJ under a 1-V $V_{\text {DD}}$ . Furthermore, the startup time varies by ±4.4%, ±3.6%, and ±5.1% (worst case) over $\Delta F$ (0.25% to 2%), temperature (−40 to $85~^{\circ }$ C), and $V_{DD}$ (0.95 to 1.05 V) variations, respectively. The XO’s phase noise in the steady-state is −137.8dBc/Hz at the 1-kHz offset, with a power consumption of $63~\mu $ W.