Katarzyna Konieczna

Mrs. Katarzyna Konieczna

Warsaw University of Technology, Civil Engineering Faculty
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 January 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Katarzyna KoniecznaKatarzyna Konieczna
Katarzyna Konieczna
Karol ChilmonKarol Chilmon
Karol Chilmon
WJWioletta Jackiewicz-Rek
Wioletta Jackiewicz-Rek
The main assumption of eco-efficient High-Performance Concrete (HPC) design is the reduction of Portland cement clinker content without negatively affecting the composite’s mechanical and durability properties. In this paper, three low-clinker HPC mixtures incorporating slag cement (CEM III/B as per EN 197-1) and Supplementary Cementitious Materials (SCMs)—Ground Granulated Blast Furnace Slag (GGBFS), Siliceous Fly Ash (SFA) and Silica Fume (SF)—were designed. The maximum amount of Portland cement clinker from CEM III/B varied from 64 to 116 kg in 1 m3 of concrete mix. The compressive strength of HPC at 2, 7, 14, 28, 56, 90 days, and 2 years after casting, as well as the modulus of elasticity on 2-year-old specimens, was tested. The depth of water penetration under pressure and internal frost resistance in freeze–thaw tests were evaluated after 56 days of curing. Additionally, the concrete pH value tests were performed. The microstructure of 2-year-old HPC specimens was analyzed using Scanning Electron Microscopy (SEM). The research proved that it is possible to obtain low-clinker High-Performance Concretes that reach compressive strength of 76–92 MPa after 28 days of curing, show high values of modulus of elasticity (49–52 GPa) as well as increased resistance to frost and water penetration under pressure.

8 March 2023 in Materials
Verified
Journal Article
Open access
PDF file
PRPiotr Radziszewski
Piotr Radziszewski
ALAdam Liphardt
Adam Liphardt
MSMichał Sarnowski
Michał Sarnowski
KKKarol Jan Kowalski
Karol Jan Kowalski
PPPiotr Pokorski
Piotr Pokorski
MMMaciej Michalec
Maciej Michalec
This paper presents the results of an analysis of the changes in the stiffness of asphalt binders modified with a bio-flux additive and subjected to the processes of foaming and short-term ageing. The purpose of the analyses was to determine changes in the rheological properties of asphalt binder as a result of technological processes characteristic of hot and warm mix asphalt technology. Three asphalt binders with similar penetration but varying degrees of polymer modification were tested: 50/70, 45/80–55 polymer-modified bitumen, and 45/80–80 highly modified bitumen. Tests were carried out on four groups of binders: original binders, foamed binders after 14 days of storage, non-foamed binders after Rolling Thin Film Oven Test (RTFOT) ageing, and foamed binders after 14 days of storage subjected to RTFOT ageing. The master curves of the complex shear modulus G* were analysed, and three indexes of binder stiffening were determined, characterising the investigated effects. The tests showed that some of the stiffening indices significantly depended on the degree of polymer modification and the content of the bio-flux additive. Moreover, it was found that the foaming process in the case of paving-grade bitumen and polymer-modified bitumen did not contribute to the additional stiffening of the binders.

1 December 2020 in Materials
Verified
Journal Article
Open access
PDF file
Katarzyna KoniecznaKatarzyna Konieczna
Katarzyna Konieczna
PPPiotr Pokorski
Piotr Pokorski
WSWojciech Sorociak
Wojciech Sorociak
PRPiotr Radziszewski
Piotr Radziszewski
DŻDawid Żymełka
Dawid Żymełka
Jan B. KrólJan B. Król
Jan B. Król
The benefits of the use of cold recycling mixtures (CRMs) in pavement rehabilitation are associated with both the reduction of natural resource consumption by replacing them with recycled materials and the reduction of energy consumption during their production and paving. The evolution of the stiffness of CRMs in road construction and the fatigue life of pavements with CRM base layers are still being investigated. In this paper, CRMs with 1% cement content, called bitumen-stabilized materials with bitumen emulsion (BSM-Es), were examined. Mixtures that were differentiated in terms of Reclaimed Asphalt Pavement (RAP) content, as well as the amount and type of bitumen emulsions, were subjected to indirect tensile stiffness modulus (ITSM) tests at 5 °C, 13 °C, and 20 °C. The thermal sensitivities of the BSM-E mixtures were analyzed. BSM-E mixture stiffness modulus levels at various temperatures were determined using a statistical approach. On the basis of the results obtained, a discussion on the mechanistic-empirical design of flexible pavements with BSM-E base layers is presented. The potential benefits of using BSM-E materials in road construction in certain aspects of pavement life are indicated.

22 January 2025 in Construction and Building Materials
Verified
Journal Article
Open access
Katarzyna KoniecznaKatarzyna Konieczna
Katarzyna Konieczna
Jan B. KrólJan B. Król
Jan B. Król
MFMiftah Farid
Miftah Farid
Marcin Daniel GajewskiMarcin Daniel Gajewski
Marcin Daniel Gajewski
PPPiotr Pokorski
Piotr Pokorski
Jan ValentinJan Valentin
Jan Valentin

4 January 2026 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Katarzyna KoniecznaKatarzyna Konieczna
Katarzyna Konieczna
Jan B. KrólJan B. Król
Jan B. Król
WSWojciech Sorociak
Wojciech Sorociak
To limit reflective cracking in asphalt pavements with cold-recycled base courses, cold recycling mixtures (CRMs) are designed to provide predominantly bituminous bonding, making their viscoelastic behaviour of paramount importance. This study presents an experimental evaluation of the viscoelasticity of CRMs containing 0–90% RAP, 5.5–7.4% bitumen emulsion, and 1% cement. The dynamic modulus and phase angle were determined according to AASHTO T 378-22 across temperatures of 5–40 °C and loading frequencies of 0.1–25 Hz. To assess the applicability of the time–temperature superposition principle (TTSP) for describing the CRMs’ mechanical behaviour, master curves were constructed and the statistical analysis of the model fit quality was performed. The research findings demonstrate that CRMs’ mechanical behaviour can be effectively modelled using TTSP, with their viscoelastic response being influenced by RAP and bitumen emulsion content. CRMs showed lower temperature sensitivity than HMA, yet changes in dynamic modulus and phase angle remained statistically significant. This study advances the performance-based design of CRMs and points to the potential of rheological modelling for their constitutive characterization.

22 December 2023 in Roads and Bridges – Drogi i Mosty
Verified
Journal Article
Open access
PDF file
Katarzyna KoniecznaKatarzyna Konieczna
Katarzyna Konieczna
Jan B. KrólJan B. Król
Jan B. Król
Recykling głęboki nawierzchni drogowych w technologii na zimno zyskuje coraz większą popularność, wpisując się w trendy zrównoważonego rozwoju w budownictwie. Mieszanki stabilizowane emulsją asfaltową (Bitumen Stabilised Materials — BSM), stosowane do wykonywania podbudów drogowych, zawierają destrukt asfaltowy, kruszywo doziarniające, wodę oraz środki wiążące: emulsję asfaltową lub asfalt spieniony oraz cement. W zakresie właściwości mechanicznych, mieszanki BSM wykazują właściwości charakteryzujące zarówno materiały ziarniste, jak i lepkosprężyste. Analiza źródeł literaturowych wskazuje, że aspekt lepkosprężystości mieszanek BSM nie został dotychczas wystarczająco zbadany. W artykule przedstawiono wyniki prac nad syntezą i adaptacją procedur badania pełzania dynamicznego, stosowanych do oceny odporności na deformacje trwałe mieszanek mineralno-asfaltowych, w celu przeprowadzenia oceny właściwości mieszanek BSM. Badania metodą Flow Number przeprowadzono na mieszankach BSM z 50% i 70% zawartością destruktu asfaltowego, ilością emulsji asfaltowej w zakresie 4,5%–6,4% oraz dodatkiem cementu na poziomie 1%. W celu wyznaczenia wartości parametru Flow Number analizowano przebieg krzywych skumulowanego odkształcenia trwałego przy zadanych warunkach obciążenia i temperatury. Dokonano oceny dopasowana modelu matematycznego Franckena do danych empirycznych. Przeprowadzone badania i analiza danych wykazały, że ustalenie parametrów badania dynamicznego pełzania Flow Number na potrzeby badań mieszanek BSM wymaga indywidualnego podejścia uwzględniającego skład i właściwości objętościowe tych mieszanek. Przy właściwie dobranych warunkach obciążenia i temperatury, możliwe jest przeprowadzenie oceny odporności na deformacje trwałe mieszanek BSM, stosując metody badawcze aplikowane do lepkosprężystych mieszanek mineralno-asfaltowych.