This work investigates the transient characteristics of an AlGaN/GaN lateral Schottky barrier diode (SBD) and its recovery process with a dedicated dynamic measurement system. Both static and dynamic characteristics were measured, analyzed with the consideration of acceptor/donor traps in the C-doped buffer and GaN channel, and verified by Silvaco TCAD (technology computer aided design) simulations. The energy band, electric field, and electron concentration were monitored in the transient simulation to study the origin of the current collapse in the SBD. Using the verified model, the impact of carbon doping concentration in the buffer and the thickness of the unintentionally doped (UID) GaN channel in the transient behavior was estimated. Several observations were revealed. Firstly, the traps in the GaN channel and buffer layer have a significant impact on the current collapse of the device. A severe deterioration of current collapse can be observed in the SBDs with increasing density of acceptor-like traps. Secondly, the current collapse increases with the thinner UID GaN channel layer. This well-performed simulation model shows promise to be utilized for the dynamic performance optimization of GaN lateral devices.
This study employs an innovative dynamic switching test system to investigate the dynamic switching characteristics of three p-GaN HEMT devices. The dynamic switching characteristics are different from the previous research on the dynamic resistance characteristics of GaN devices, and the stability of GaN devices can be analyzed from the perspective of switching characteristics. Based on the theory of dynamic changes in threshold opening voltage and capacitance caused by electrical stress, the mechanism of dynamic switching characteristics of GaN HEMT devices is studied and analyzed in detail. The test results have shown that electrical stress induces trap ionization within the device, resulting in fluctuations in electric potential and ultimately leading to alterations in two critical factors of the dynamic switching characteristics of GaN HEMT devices, the parasitic capacitance and the threshold voltage. The dynamic changes in capacitance before and after electrical stress vary among devices, resulting in different dynamic switching characteristics. The test system is capable of extracting the switching waveform for visual comparison and quantitatively calculating the changes in switching parameters before and after electrical stressing. This test provides a prediction for the drift of switch parameters, offering pre-guidance for the robustness of the optimized application scheme.
This article presents an on-chip state-adjustable 8 GHz~12 GHz low-noise amplifier (LNA). It has two characteristics. First, an improved current reuse topology is proposed. By connecting a small capacitor in parallel with the drain of the first-stage transistor, the bandwidth is expanded and the in-band flatness is improved. Second, an innovative adaptive bias circuit is designed to cope with the influence of temperature and process on the performance of the amplifier, and a design method for on-chip adjustment of the chip state is proposed for the first time. As a result of these technologies, the chip area is 1.1 mm × 0.8 mm, the chip provides 24.4 dB nominal gain with merely 0.75 dB noise at 10 GHz, and yields 14.5 dBm output power at 1 dB compression point (OP1dB) when biased at 30 mA quiescent current, meanwhile, gain, OP1dB, and quiescent current can be adjusted on-chip. This design improves the comprehensive performance of X-band LNA and provides more flexibility for system engineers in application. The chip is fabricated using Win Semiconductors’ 0.15 um InGaAs pHEMT E-mode process.
In this study, a dedicated dynamic measurement system was used to investigate the transient capacitance and recovery process of AlGaN/GaN lateral Schottky barrier diodes (SBDs). With the consideration of acceptor traps in the C-doped buffer, the C-V characteristics and transient capacitance were measured and analyzed, and the results were simulated and explained by Silvaco TCAD (technology computer aided design). The ionization of acceptor traps and the change of electric potential were monitored in transient simulation to investigate the origin of the capacitance collapse in the SBD. The results suggest the significant impact of traps in the GaN buffer layer on the capacitance collapse of the device, and the secondary capture effect on the variation of acceptor ionization. Based on the study of transient capacitance of SBD, this work could be extended to the Miller capacitance in high electron mobility transistor (HEMT) devices. Moreover, the report on the stability of capacitance is essential for GaN devices, and could be further extended to other aspects of device research.
In this work, fast-recovery characteristics of high-power GaN Schottky barrier diode (SBD) limiters are investigated through a parallel-resonator-assisted topology and a circuit-level transient simulation method for recovery-process analysis. By introducing a parallel resonant unit, composed of the diode junction capacitance and short-circuited stubs, into a conventional shunt limiter topology, the high-frequency passband characteristics of the traditional shunt topology under large-size GaN SBD conditions are improved, and the transient response after high-power excitation is reshaped, thereby shortening the recovery time from the large-signal limiting state to the small-signal steady-state operation. Based on the ADS platform, a combined excitation scheme using a high-power pulse signal and a low-power continuous-wave signal is adopted to perform circuit-level transient simulation of the limiter recovery process. Simulation results show that, under a 50-W input power condition, the recovery time is reduced from 16.3 ns to 11.2 ns after introducing the parallel resonant unit in the C-band. These results indicate that circuit topology significantly affects the recovery behavior of high-power GaN SBD limiters, and the proposed approach provides a useful reference for circuit-level design and transient analysis of fast-recovery microwave limiters.
In this article, a dedicated testing system is developed to realize low-delay threshold voltage (VTH) characteristic testing of silicon carbide (SiC) MOSFET devices after an avalanche stress. The developed low-delay testing system enables VTH detection within milliseconds after the avalanche, facilitating the study of VTH drift behavior under different gate-source turn-off voltages (VGS-OFF) and repeated avalanche events. Experimental results of 1200 V commercial devices indicate that after a single avalanche stress, VTH drifts positively by about 0.11 V when VGS-OFF is 0 V. However, if the avalanche stress is monitored at a negative bias of VGS-OFF, VTH exhibits a negative drift. The drift increases as a more negative gate bias is applied. When VGS-OFF reaches 6 V, the VTH drift saturates at approximately −0.226 V. After repeated avalanche cycles, the threshold drift does not saturate until VGS-OFF is −10 V. Furthermore, verification shows that the VTH drift is minimized when VGS-OFF is −3 V. The absolute value of VTH drift shows a non-monotonic variation with avalanche cycles: it starts to increase with the number of avalanche cycles, reaching a peak at approximately 1000 cycles, and further increasing the avalanche cycles. The magnitude of the drift gradually decreases after reaching a peak. TCAD simulations reveal that this phenomenon could be attributed to the ionization of donor/acceptor traps at the SiC/SiO2 interface and the consequent modulation of channel hole concentration. After excitation by electric fields of varying intensities, the ionization of acceptor and donor traps undergoes differential changes, consequently leading to a non-monotonic drift in threshold voltage.