Stepper motors are widely used in many applications where discrete, precise movement is required. There is a variety of dedicated stepper motor controllers (sometimes referred to as “step sticks”) available on the market. Those controllers provide a number of different motor control schemes that vary by aspects like current control method, reference current shape or maximum resolution increase (microstepping). The two most widely acknowledged signal shapes are sine-cosine microstepping and quadrature microstepping. The choice of the control scheme impacts torque output, torque variation, positioning error and maximum power supply requirements. This paper presents a family of generalised microstepping signal shapes, ranging from sine-cosine microstepping to quadrature microstepping. Derivation of signal shapes as well as their mathematical analyses are provided. Those signals are then implemented on the control board. A series of experiments is performed on a test bench to analyse the influence of different signal shapes on the performance of the motor in both load and no load conditions. The comparison of the new generalized shapes influence on the motor operation to the commonly used sine-cosine and quadrature control is provided.
The majority of the paper is devoted to debunking flawed methods proposed in the literature within the context of multiresonant control systems for grid-connected converters and then a novel approach is proposed. Several flawed approaches to grid tied power electronic converters (rectifiers and shunt active power filters) are discussed to initiate a critical discussion regarding some tuning methods reported in the topical literature. In this paper we analytically show that some of them are even erroneous from the control theory point of view or are based on mathematically erroneous derivations. That is especially prevalent for papers in which the Naslin polynomial method is employed to tune proportional-multiresonant controllers. Some authors recognize that the resulting control systems are not robust, i.e. not practical, and use obtained gains only as a starting point for further tuning using the trial and error method or evolutionary global optimization. Robustness of such systems is often not guaranteed and if it occurs at all, it is by chance or thanks to a combination of luck and expert knowledge of the engineer (not by deliberate design). Therefore, the absence of such a guarantee motivates the search for better ways to tune such controllers. As a result, a practical robust controller tuning method for multiresonant grid current controllers is proposed and verified experimentally. We are convinced that one of the solutions can be based on the disk margin stability analysis and a global search algorithm. The required robustness is expressed as stability margins. The design procedure is very user-friendly and the disk size is the key design parameter to be selected by an engineer. The practicality of the tuning method is demonstrated empirically in a 10 kVA physical grid-tied converter.
This paper presents a control strategy for four-leg grid-connected PWM rectifiers that have an active power filtering function. The four-leg voltage source converter topology gives ability to control an input current in the neutral leg. That is important for the active power filtering function when there is an unbalanced load. The control strategy is based on a voltage oriented method that has a cascaded DC voltage and current controllers designed in a rotating reference frame. The DC voltage controller is a PI-type, whereas the input current is shaped by a full-state feedback controller. The novelty of the proposed solution is the control structure that has modified the DC voltage error signal by adding a discontinuity element and reduction the number of current signals by half. The discontinuity element is needed to provide a constant reference current signal during active power filtering operation. The paper describes in detail the design procedure for the voltage and current controllers. Numerical results for active rectification and active power filtering operations are presented and discussed. Numerical results have been obtained by using a discrete control model.
This paper presents a powertrain system for an urban electric vehicle. The powertrain system consists of a hybrid energy source (battery storage and ultracapacitors) and drivetrain system (two in-wheel outer-rotor PMSM motors). Battery performance improvement, has been achieved by supporting it with ultracapacitor energy storage. Power flow control using fuzzy logic controller is presented in detail. An electronic differential algorithms have been implemented and tested.