This study describes the basic principles of optical waveguide refractive index sensing and the various design structures of refractive index sensors. These waveguides generate different optical resonances, which cause changes in the sensing refractive index and temperature and are subsequently used to detect the concentration in the analyses. First, the structural characteristics and performance indices of the microring sensor and interferometer are studied based on the refractive index of the optical waveguide. Second, the principle and sensing detection mechanism of the two types of refractive index sensing employed in these sensors are analyzed. Then, the two sensors are classified and discussed from the perspective of the waveguide materials and structures, as well as the substances to be measured. Simultaneously, performance indicators such as sensitivity and detection range are compared and summarized. The comparison results show that there is a compromise between the sensitivity and quality factor of the optical waveguide refractive index sensor. Finally, applications of refractive index sensing in the biochemical field for material detection are discussed, showing that the optical waveguide refractive index sensor has significant advantages over other types of biochemical optical sensors.

The 1550 nm band semiconductor optical amplifier (SOA) has great potential for applications such as optical communication. Its wide-gain bandwidth is helpful in expanding the bandwidth resources of optical communication, thereby increasing total capacity transmitted over the fiber. Its relatively low cost and ease of integration also make it a high-performance amplifier of choice for LiDAR applications. In recent years, with the rapid development of quantum-well (QW) material systems, SOAs have gradually overcome the shortcomings of polarization sensitivity and high noise. The research on quantum-dot (QD) materials has further improved the noise characteristics and transmission loss of SOAs. The design of special waveguide structures—such as plate-coupled optical waveguide amplifiers and tapered amplifiers—has also increased the saturation output power of SOAs. The maximum gain of the SOA has been reported to be more than 21 dB. The maximum saturation output power has been reported to be more than 34.7 dBm. The maximum 3 dB gain bandwidth has been reported to be more than 120 nm, the lowest noise figure has been reported to be less than 4 dB, and the lowest polarization-dependent gain has been reported to be 0.1 dB. This study focuses on the improvement and enhancement of the main performance parameters of high-power SOAs in the 1550 nm band and introduces the performance parameters, the research progress of high-power SOAs in the 1550 nm band, and the development and application status of SOAs. Finally, the development trends and prospects of high-power SOAs in the 1550 nm band are summarized.

High-power semiconductor lasers have attracted widespread attention because of their small size, easy modulation, and high conversion efficiency. They play an important role in national economic construction and national defense construction, including free-space communication; industrial processing; and the medical, aerospace, and military fields, as well as other fields. The reliability of high-power semiconductor lasers is the key point of the application system. Higher reliability is sought in the military defense and aerospace fields in particular. Reliability testing and failure analysis help to improve the performance of high-power semiconductor lasers. This article provides a basis for understanding the reliability issues of semiconductor lasers across the whole supply chain. Firstly, it explains the failure modes and causes of failure in high-power semiconductor lasers; this article also summarizes the principles and application status of accelerated aging experiments and lifetime evaluation; it also introduces common techniques used for high-power semiconductor laser failure analysis, such as the electron beam-induced current (EBIC) technique and the optical beam-induced current (OBIC) technique, etc. Finally, methods used to improve the reliability of high-power semiconductor lasers are proposed in terms of the preparation process, reliability screening, and method application.

As LiDAR technology progressively advances, the capability of radar in detecting targets has become increasingly vital across diverse domains, including industrial, military, and automotive sectors. Frequency-modulated continuous-wave (FMCW) LiDAR in particular has garnered substantial interest due to its efficient direct velocity measurement and excellent anti-interference characteristics. It is widely recognized for its significant potential within radar technology. This study begins by elucidating the operational mechanism of FMCW LiDAR and delves into its basic principles. It discuss, in depth, the influence of various parameters on FMCW LiDAR’s performance and reviews the latest progress in the field. This paper proposes that future studies should focus on the synergistic optimization of key parameters to promote the miniaturization, weight reduction, cost-effectiveness, and longevity of FMCW LiDAR systems. This approach aims at the comprehensive development of FMCW LiDAR, striving for significant improvements in system performance. By optimizing these key parameters, the goal is to promote FMCW LiDAR technology, ensuring more reliable and accurate applications in automated driving and environmental sensing.

Narrow-linewidth lasers mainly depend on the development of advanced laser linewidth measurement methods for related technological progress as key devices in satellite laser communications, precision measurements, ultra-high-speed optical communications, and other fields. This manuscript provides a theoretical analysis of linewidth characterization methods based on the beat frequency power spectrum and laser phase noise calculations, and elaborates on existing research of measurement technologies. In addition, to address the technical challenges of complex measurement systems that commonly rely on long optical fibers and significant phase noise jitter in the existing research, a short-delay self-heterodyne method based on coherent envelope spectrum demodulation was discussed in depth to reduce the phase jitter caused by 1/f noise. We assessed the performance parameters and testing conditions of different lasers, as well as the corresponding linewidth characterization methods, and analyzed the measurement accuracy and error sources of various methods.

The high-precision diffraction grating is an important chromatic dispersion component that has been widely used in many fields, including laser beam combining, chirped pulse compression, spectroscopy, among others. In this paper, we review the development status of reflection and transmission gratings with high diffraction efficiency and high laser-induced damage thresholds, such as metal-film and multilayer-dielectric-film gratings. Then, we review the basic principles and most recent stages in the development of manufacturing techniques, such as mechanical scribing, holographic exposure, electron-beam lithography, and nanoimprinting.