Energy harvesters serve as continuous and long-lasting sources of energy that can be integrated into wearable and implantable sensors and biomedical devices. This review paper presents the current progress, the challenges, the advantages, the disadvantages and the future trends of energy harvesters which can harvest energy from various sources from the human body. The most used types of energy are chemical; thermal and biomechanical and each group is represented by several nano-generators. Chemical energy can be harvested with a help of microbial and enzymatic biofuel cells, thermal energy is collected via thermal and pyroelectric nano-generators, biomechanical energy can be scavenged with piezoelectric and triboelectric materials, electromagnetic and electrostatic generators and photovoltaic effect allows scavenging of light energy. Their operating principles, power ratings, features, materials, and designs are presented. There are different ways of extracting the maximum energy and current trends and approaches in nanogenerator designs are discussed. The ever-growing interest in this field is linked to a larger role of wearable electronics in the future. Possible directions of future development are outlined; and practical biomedical applications of energy harvesters for glucose sensors, oximeters and pacemakers are presented. Based on the increasingly accumulated literature, there are continuous promising improvements which are anticipated to lead to portable and implantable devices without the requirement for batteries.
The human body is a source of multiple types of energy, such as mechanical, thermal and biochemical, which can be scavenged through appropriate technological means. Mechanical vibrations originating from contraction and expansion of the radial artery represent a reliable source of displacement to be picked up and exploited by a harvester. The continuous monitoring of physiological biomarkers is an essential part of the timely and accurate diagnosis of a disease with subsequent medical treatment, and wearable biosensors are increasingly utilized for biomedical data acquisition of important biomarkers. However, they rely on batteries and their replacement introduces a discontinuity in measured signals, which could be critical for the patients and also causes discomfort. In the present work, the research into a novel 3D-printed wearable energy harvesting platform for scavenging energy from arterial pulsations via a piezoelectric material is described. An elastic thermoplastic polyurethane (TPU) film, which forms an air chamber between the skin and the piezoelectric disc electrode, was introduced to provide better adsorption to the skin, prevent damage to the piezoelectric disc and electrically isolate components in the platform from the human body. Computational fluid dynamics in the framework of COMSOL Multiphysics 6.1 software was employed to perform a series of coupled time-varying simulations of the interaction among a number of associated physical phenomena. The mathematical model of the harvester was investigated computationally, and quantification of the output energy and power parameters was used for comparisons. A prototype wearable platform enclosure was designed and manufactured using fused filament fabrication (FFF). The influence of the piezoelectric disc material and its diameter on the electrical output were studied and various geometrical parameters of the enclosure and the TPU film were optimized based on theoretical and empirical data. Physiological data, such as interdependency between the harvester skin fit and voltage output, were obtained.
This paper describes the steady state performance analysis of a 3-shaft closed cycle helium turbine using nuclear heat source. The analysis is carried out using a computer program, which is specifically made for this cycle. The computer model was tested for various Turbine Entry Temperatures (TET) and absolute pressures. The analysis of the change was focused on the compressors, as these are relatively more critical than the rest of the equipments. The change in TET triggered changes in shaft speed, mass flow rate, power output, absolute pressure etc. Adjustable guide vanes were used to study the operation with constant surge margin. The closed cycle was tested for various absolute pressures and it was established that the efficiency will not be affected in using the inventory control for the load variation.
The paper presents a design and operation analysis of an Integrated Collector Storage (ICS) solar water heater, which consists of an asymmetric Compound Parabolic Concentrating (CPC) reflector trough, while the water tank comprises two concentric cylinders. The annulus between these vessels is partially depressurized and contains a small amount of water in the bottom of the outer vessel which dominantly contributes to the heat transfer from the outer to the inner cylinder. A multi-criteria optimization algorithm is applied to re-evaluate the design specifications of the parabolic surface, thus modifying the design of the entire ICS system and predict the necessary number of units for achieving the highest possible effectiveness with minimized fabrication costs and environmental impacts. The environmental footprint of the device is assessed through Life Cycle Assessment (LCA). The produced thermal energy in conjunction with the environmental and economic results are evaluated as a function of different configuration parameters regarding the water storage conditions, the solar radiation and the total pressure inside the annulus. The ultimate aim of the evaluation process is to offer new perspectives on the design principles of environmentally friendly and cost-effective devices with improved thermal performance.
The supply and treatment of water is a highly energy-intensive process and is responsible for large amounts of greenhouse gas emissions and economic costs. There is a worldwide recognition of the requirement for more sustainable water supply systems, and the use of small hydropower turbines within water supply networks offers a viable option for electricity generation in water distribution networks at locations of excessively high flow or pressure without compromising the level of service to consumers. This paper presents a critical review of the current state of the art and knowledge regarding the available energy potential, the hydropower technology options that are under current use and development, existing implementation projects, research activities and economic aspects of this new technological field. The challenges for the improvement of sustainability of water distribution networks through the implementation of small-scale hydropower turbines within water supply networks will be also presented and analysed.