The ever-increasing demand for flexible and portable communications has led to a rapid evolution in networking between unmanned aerial vehicles (UAVs) often referred to as flying ad-hoc networks (FANETs). However, due to the exclusive characteristics of UAVs such as high mobility, frequent topology change and 3D space movement, make routing a challenging task in FANETs. Due to these characteristics, designing new routing protocols for FANETs is quite difficult. In the literature study of FANETs, a variety of traditional ad-hoc networking protocols have been suggested and tested for FANETs to establish an efficient and robust communication among the UAVs. In this context, topology-based routing is considered the most significant approach for solving the routing issues in FANETs. Therefore, in this article we specifically focus on topology-based routing protocols with the aim of improving the efficiency of the network in terms of throughput, end-to-end delay, and network load. We present a brief review of the most important topology-based routing protocols in the context of FANETs. We provide them with their working features for exchanging information, along with the pros and cons of each protocol. Moreover, simulation analyses of some of the topology-based routing protocols are also evaluated in terms of end-to-end delay, throughput and network load the using optimized network engineering tools (OPNET) simulator. Furthermore, this work can be used as a source of reference for researchers and network engineers who seek literature that is relevant to routing in FANETs.

Cryptocurrency mining and blockchain technology using renewable energy as the main electricity source has gained attention for sustainable development in financial areas. However, very few studies have been reported concerning the power usage of cryptocurrencies using renewable energy. In this article, we report the effect of overclocking and undervolting on power usage and the hash rate for mining dogecoin with solar energy as renewable energy. The mining rig used in this work consists of different graphics processing units (GPUs) and non-LHR (lite hash rate) cards. The UnMineable software has been used for mining dogecoin as well as for wallet integration. The results indicate that mining dogecoin with solar energy as renewable energy consumes 2000 Watts power with overclocking and 1700 Watts power with undervolting technique. This work implicates the potential future of crypto-mining with renewable energy and the hardware configuration associated with it, which is expected to reduce e-waste and improve sustainable development. To reduce the e-waste and high electricity consumption, we have introduced two important techniques named GPU optimization and use of renewable energy for mining, which helps the miners to reduce the e-waste and electricity consumption significantly at the same time getting most out of the GPU by not having any impact on the environment.

As the commercial implementations of 5G networks have been initiated in different regions of the world, the focus of the researchers is bending towards the next generation of wireless communication. This research study intends to investigate the requisites of the fast establishment of the theoretical and practical measures for sixth generation (6G) wireless communication. To this end, this paper first outlined the existing research works that have considered different aspects of 6G, and then based on this existing works, the future vision is established. Then, the 6G vision is based on four types of connectivity and is summarized as “Wherever you think, everything follows your heart.” To fill the gap between the market requirements after one decade and the limited capabilities of 5G, different specifications of 6G that make it an appropriate replacement are discussed. Furthermore, different candidate technologies that can potentially realize the 6G communication are studied, followed by discussion on different challenges in the realization and possible research directions to cope with these challenges. By exploring the vision of future, its specification, and key candidate technologies, this paper attempts to summarize the general 6G framework. In addition, with mentioned challenges in realization of 6G, the aim of this paper is to guide the researcher and attract their interest to consider them.

The Internet of Things (IoT) and network-enabled smart devices are crucial to the digitally interconnected society of the present day. However, the increased reliance on IoT devices increases their susceptibility to malicious activities within network traffic, posing significant challenges to cybersecurity. As a result, both system administrators and end users are negatively affected by these malevolent behaviours. Intrusion-detection systems (IDSs) are commonly deployed as a cyber attack defence mechanism to mitigate such risks. IDS plays a crucial role in identifying and preventing cyber hazards within IoT networks. However, the development of an efficient and rapid IDS system for the detection of cyber attacks remains a challenging area of research. Moreover, IDS datasets contain multiple features, so the implementation of feature selection (FS) is required to design an effective and timely IDS. The FS procedure seeks to eliminate irrelevant and redundant features from large IDS datasets, thereby improving the intrusion-detection system’s overall performance. In this paper, we propose a hybrid wrapper-based feature-selection algorithm that is based on the concepts of the Cellular Automata (CA) engine and Tabu Search (TS)-based aspiration criteria. We used a Random Forest (RF) ensemble learning classifier to evaluate the fitness of the selected features. The proposed algorithm, CAT-S, was tested on the TON_IoT dataset. The simulation results demonstrate that the proposed algorithm, CAT-S, enhances classification accuracy while simultaneously reducing the number of features and the false positive rate.

Unmanned aerial vehicle (UAV) has recently gained significant attention due to their efficient structures, cost-effectiveness, easy availability, and tendency to form an ad hoc wireless mobile network. IoT-enabled UAV is a new research domain that uses location tracking with the advancement of aerial technology. In this context, the importance of 3D aerial networks is attracting a lot of attention recently. It has various applications related to information processing, communication, and location-based services. Location identification of wireless nodes is a challenging job and of extreme importance. In this study, we introduced a novel technique for finding indoor and open-air three-dimensional (3D) areas of nodes by measuring the signal strength. The mathematical formulation is based on a path loss model and decision tree machine learning classifier. We constructed 2D and 3D models to gather more accurate information on the nodes. Simulation findings demonstrate that the proposed machine learning-based model excels in nodes location estimation, the actual and estimated distance of different nodes, and calculation of received signal strength in aerial ad hoc networks. In addition, the decision tree constructs an offline phase control in the flying vehicle’s location to enhance the time complexity along with experimental accuracy.

Computed tomography (CT) is used in a wide range of medical imaging diagnoses. However, the reconstruction of CT images from raw projection data is inherently complex and is subject to artifacts and noise, which compromises image quality and accuracy. In order to address these challenges, deep learning developments have the potential to improve the reconstruction of computed tomography images. In this regard, our research aim is to determine the techniques that are used for 3D deep learning in CT reconstruction and to identify the training and validation datasets that are accessible. This research was performed on five databases. After a careful assessment of each record based on the objective and scope of the study, we selected 60 research articles for this review. This systematic literature review revealed that convolutional neural networks (CNNs), 3D convolutional neural networks (3D CNNs), and deep learning reconstruction (DLR) were the most suitable deep learning algorithms for CT reconstruction. Additionally, two major datasets appropriate for training and developing deep learning systems were identified: 2016 NIH-AAPM-Mayo and MSCT. These datasets are important resources for the creation and assessment of CT reconstruction models. According to the results, 3D deep learning may increase the effectiveness of CT image reconstruction, boost image quality, and lower radiation exposure. By using these deep learning approaches, CT image reconstruction may be made more precise and effective, improving patient outcomes, diagnostic accuracy, and healthcare system productivity.