This paper presents the implementation of a data acquisition system, where the folded thermal noise is reduced by using two consecutive subsampling processes. The presented implementation is used to test wideband multistandard receivers covering most of present communication standards. The proposed system converts a 20-MHz signal modulated with a programmable carrier frequency up to 6.5 GHz, so that it could be used as a universal receiver for software-defined radio applications. Experimental results show an effective number of bits larger than 9 bits up to 2.9 GHz, 8 bits up to 6.5 GHz, and 6.4 bits up to 20 GHz of input carrier frequency.
24 May 2018 in IEEE Transactions on Nuclear Science
In this paper, the design of a Power-On-Reset (POR) IP block for the RD53 collaboration, a Radiation Hardening By Design (RHbD) circuit to withstand the High-Luminosity Large Hadron Collider (HL-LHC) tracker radiation environment, is presented. In this environment, the performance of the IP block under radiation must be ensured for a Total Ionizing Dose (TID) up to 500 Mrad and possible ions interaction for a Linear Energy Transfer (LET) of 15 MeV-cm2/mg. To verify the radiation hardness of the presented circuit, an automatic Single Event Effects sensitivity tool (AFTU) has been used to perform a complete analysis over it, and also several experiments have been performed to test the designed blocks and obtain the final IP qualification.
Depleted Monolithic Active Pixel Sensors (DMAPSs) are foreseen as an interesting choice for future high-energy physics experiments, mainly because of the reduced fabrication costs. However, they generally offer limited time resolution due to the stringent requirements of area and power consumption imposed by the targeted spatial resolution. This work describes a methodology to optimize the design of time-to-digital converter (TDC)-based timing electronics that takes advantage of the asymmetrical shape of the pulse at the output of the analog front-end (AFE). Following that methodology, a power and area efficient implementation fully compatible with the RD50-MPW3 solution is proposed. Simulation results show that the proposed solution offers a time resolution of 2.08 ns for a range of energies from 1000 e− to 20,000 e−, with minimum area and zero quiescent in-pixel power consumption.