Kashif nisar Paracha

Dr. Kashif nisar Paracha

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 April 2019 in IEEE Access
Verified
Journal Article
Open access
KPKashif nisar Paracha
Kashif nisar Paracha
SRSharul Kamal Abdul Rahim
Sharul Kamal Abdul Rahim
Ping Jack SohPing Jack Soh
Ping Jack Soh
MKMohsen Khalily
Mohsen Khalily
Wearable antennas have gained much attention in recent years due to their attractive features and possibilities in enabling lightweight, flexible, low cost and portable wireless communication and sensing. Such antennas need to be conformal when used on different parts of the human body, thus need to be implemented using flexible materials and designed in a low profile structure. Ultimately, these antennas need to be capable of operating with minimum degradation in proximity to the human body. Such requirements render the design of wearable antennas challenging, especially when considering aspects such as their size compactness, effects of structural deformation and coupling to the body, and fabrication complexity and accuracy. Despite slight variations in severity according to applications, most of these issues exist in the context of body-worn implementation. This review aims to present the different challenges and issues in designing wearable antennas, their material selection, and fabrication techniques. More importantly, recent innovative methods in back radiations reduction techniques, circular polarization (CP) generation methods, dual polarization techniques and providing additional robustness against environmental effects are first presented. This is followed by a discussion of innovative features and their respective methods in alleviating these issues recently proposed by the scientific community researching in this field.

28 December 2019 in Sensors
Verified
Journal Article
Open access
PDF file
KPKashif nisar Paracha
Kashif nisar Paracha
Arslan Dawood ButtArslan Dawood Butt
Arslan Dawood Butt
AAAli S. Alghamdi
Ali S. Alghamdi
SBSuleiman Aliyu Babale
Suleiman Aliyu Babale
Ping Jack SohPing Jack Soh
Ping Jack Soh
This work reviews design aspects of liquid metal antennas and their corresponding applications. In the age of modern wireless communication technologies, adaptability and versatility have become highly attractive features of any communication device. Compared to traditional conductors like copper, the flow property and lack of elasticity limit of conductive fluids, makes them an ideal alternative for applications demanding mechanically flexible antennas. These fluidic properties also allow innovative antenna fabrication techniques like 3D printing, injecting, or spraying the conductive fluid on rigid/flexible substrates. Such fluids can also be easily manipulated to implement reconfigurability in liquid antennas using methods like micro pumping or electrochemically controlled capillary action as compared to traditional approaches like high-frequency switching. In this work, we discuss attributes of widely used conductive fluids, their novel patterning/fabrication techniques, and their corresponding state-of-the-art applications.

1 February 2019 in IEEE Access
Verified
Journal Article
Open access
KPKashif nisar Paracha
Kashif nisar Paracha
SRSharul Kamal Abdul Rahim
Sharul Kamal Abdul Rahim
Ping Jack SohPing Jack Soh
Ping Jack Soh
MKMuhammad Ramlee Kamarudin
Muhammad Ramlee Kamarudin
KTKim-Geok Tan
Kim-Geok Tan
MIMohammad Tariqul Islam
Mohammad Tariqul Islam
A planar, low-profile, dual-band, dual-polarized antenna on a semi-flex substrate is proposed in this research. The antenna is fabricated on Rogers substrate with a thickness of 3.04 mm and sized at 70.4 × 76.14 × 3.11 mm3 (0.37λ0 × 0.40λ0 × 0.016 λ0) only. The circular polarization (CP) property is enabled in the Global Navigation Satellite System (GNSS) L1/E1 (lower) band by introducing a Complementary Split Ring Resonator (CSRR) on the antenna patch. Meanwhile, the antenna operation in the second (upper) 2.45 GHz WLAN band is enabled by etching a U-shaped slot on its ground plane. This simultaneous, dual-band and dual-polarized operation enables the proposed antenna to be applied in the indoor/outdoor wearable application. To isolate the antenna against the influence of the human body, a multiband Artificial Magnetic Conductor (AMC) plane is added on the reverse side of the dual-band radiator. Comparison of the antenna without AMC in free space and when evaluated on the chest of a human body backed by AMC showed improved gain; from 3 dBi to 5.1 dBi in the lower band, and from 1.53 dBi to 5.03 dBi in the upper band. Besides that, the front-to-back ratio (FBR) of the AMC backed monopole antenna also improved from 11 dB to 21.88 dB and from 2.5 dB to 24.5 dB in the GNSS and WLAN bands, respectively. Next, the Specific Absorption Rate (SAR) of the monopole antenna with and without the AMC plane is assessed. Evaluation results indicate that the maximum SAR value decreased by up to 89.45 % in comparison with the antenna without AMC in the lower band. This indicates the effectiveness of the AMC array in increasing gain and FBR, besides reducing EM absorption in the human body.

23 November 2021 in IEEE Access
Verified
Journal Article
Open access
Sarosh AhmadSarosh Ahmad
Sarosh Ahmad
KPKashif nisar Paracha
Kashif nisar Paracha
YSYawar Ali Sheikh
Yawar Ali Sheikh
Adnan GhaffarAdnan Ghaffar
Adnan Ghaffar
Arslan Dawood ButtArslan Dawood Butt
Arslan Dawood Butt
Francisco FalconeFrancisco Falcone
Francisco Falcone
In this article, a compact printed monopole dual-band antenna using artificial magnetic conductor (AMC)-plane with improved gain and broader bandwidth, applicable for off-body internet of things (IoT) devices is presented. The monopole antenna consists of two C-shaped resonators connected through a U-shaped monopole, parasitic elements, discrete ground circular rings and a co-planar waveguide (CPW) feedline. Each artificial magnetic conductor (AMC) unit cell consists of a slotted circular and a square stubs, designed with two zero-crossing phases for improving the radiation characteristics and to achieve the high gain. The overall size of the proposed AMC-backed antenna is 44.4 mm × 44.4 mm × 1.6 mm with electrical dimensions of 0.75λg×0.75λg×0.027λg. This AMC-backed antenna featured measured bandwidths of 9.6% and 12.4% with improved measured gain values of 4.88 dB and 4.73 dB at 2.45 GHz and 5.8 GHz, respectively. The specific absorption rate (SAR) values are analysed and found to be 1.58 W/kg at 2.45 GHz and 0.9 W/kg at 5.8 GHz. Therefore, the proposed AMC-backed antenna is useful for off-body IoT devices operating at 2.45 and 5.8 GHz industrial, scientific, and medical (ISM) band applications.

13 March 2020 in Sustainability
Verified
Journal Article
Open access
PDF file
MAMuhammad Umar Afzaal
Muhammad Umar Afzaal
MSMalik Intisar Ali Sajjad
Malik Intisar Ali Sajjad
Ahmed Bilal AwanAhmed Bilal Awan
Ahmed Bilal Awan
KPKashif nisar Paracha
Kashif nisar Paracha
Muhammad Faisal KhanMuhammad Faisal Khan
Muhammad Faisal Khan
Iskander TliliIskander Tlili
Iskander Tlili
Around the world, countries are integrating photovoltaic generating systems to the grid to support climate change initiatives. However, solar power generation is highly uncertain due to variations in solar irradiance level during different hours of the day. Inaccurate modelling of this variability can lead to non-optimal dispatch of system resources. Therefore, accurate characterization of solar irradiance patterns is essential for effective management of renewable energy resources in an electrical power grid. In this paper, the Weibull distribution based probabilistic model is presented for characterization of solar irradiance patterns. Firstly, Weibull distribution is utilized to model inter-temporal variations associated with reference solar irradiance data through moving window averaging technique, and then the proposed model is used for irradiance pattern generation. To achieve continuity of discrete Weibull distribution parameters calculated at different steps of moving window, Generalized Regression Neural Network (GRNN) is employed. Goodness of Fit (GOF) techniques are used to calculate the error between mean and standard deviation of generated and reference patterns. The comparison of GOF results with the literature shows that the proposed model has improved performance. The presented model can be used for power system planning studies where the uncertainty of different resources such as generation, load, network, etc., needs to be considered for their better management.

14 February 2018 in International Journal of Antennas and Propagation
Verified
Journal Article
Open access
PDF file
KPKashif nisar Paracha
Kashif nisar Paracha
SRSharul Kamal Abdul Rahim
Sharul Kamal Abdul Rahim
Hassan Tariq ChatthaHassan Tariq Chattha
Hassan Tariq Chattha
SASaqer ALJA'AFREH
Saqer ALJA'AFREH
Sabih ur RehmanSabih ur Rehman
Sabih ur Rehman
YLYew Chiong Lo
Yew Chiong Lo
A low-cost inkjet printing method for antenna fabrication on a polyethylene terephthalate (PET) substrate is presented in this paper. An office inkjet printer is used to have desired patterns of silver nanoparticle ink on the PET substrate without any postprocessing. Silver nanoparticle ink cures instantly as soon as it is ejected from the printer on a chemically treated PET substrate. The thickness of the silver nanoparticle layer was measured to be 300 nm with a sheet resistance of as low as 0.3 Ω/sq and a conductivity around 1.11 × 107 S/m with single layer deposition. A coplanar waveguide- (CPW-) fed Z-shape planar antenna on the PET substrate achieved the measured radiation efficiency of 62% and the IEEE gain of 1.44 dBi at 2.45 GHz. The printed antenna is also tested in bending conditions to ascertain its performance for the Internet of things (IoT) conformal applications for the future 5G network.