The push for sustainability in the construction sector has demanded the use of increasingly renewable resources. These natural fibers are biodegradable and non-toxic, and their mechanical capabilities are superior to those of synthetic fibers in terms of strength and durability. A lot of research recommends coconut fibers as an alternative to synthetic fibers. However, the knowledge is scattered, and no one can easily judge the suitability of coconut fibers in concrete. This paper presents a summary of research progress on coconut fiber (natural fibers) reinforced concrete. The effects of coconut fibers on the properties of concrete are reviewed. Factors affecting the fresh, hardened, and durability properties of concrete reinforced with coconut fiber are discussed. Results indicate that coconut fiber improved the mechanical performance of concrete due to crack prevention, similar to the synthetic fibers but decreased the flowability of concrete. However, coconut fibers improved flexure strength more effectively than compressive strength. Furthermore, improvement in some durability performance was also observed, but less information is available in this regard. Moreover, the optimum dose is an important parameter for high-strength concrete. The majority of researchers indicate that 3.0% coconut fiber is the optimum dose. The overall study demonstrates that coconut fibers have the creditability to be used in concrete instead of synthetic fibers.

Pollution from dye containing wastewater leads to a variety of environmental problems, which can destroy plant life and eco-systems. This study reports development of a seaweed-based biochar as an adsorbent material for efficient adsorption of methylene blue (MB) dye from synthetic wastewater. The Eucheuma cottonii seaweed biochar was developed through pyrolysis using a tube furnace with N₂ gas, and the properties were later improved by sulfuric acid treatment. The adsorption studies were conducted in a batch experimental setup under initial methylene blue concentrations of 50 to 200 mg/L, solution pH of 2 to 10, and temperature of 25 to 75 °C. The characterization results show that the developed biochar had a mesoporous pore morphology. The adsorbent possessed the surface area, pore size, and pore volume of 640 m²/g, 2.32 nm, and 0.54 cm³/g, respectively. An adsorption test for 200 mg/L of initial methylene blue at pH 4 showed the best performance. The adsorption data of the seaweed-based biochar followed the Langmuir isotherm adsorption model and the pseudo-second-order kinetic model, with the corresponding R² of 0.994 and 0.995. The maximum adsorption capacity of methylene blue using the developed seaweed‑based biochar was 133.33 mg/g. The adsorption followed the chemisorption mechanism, which occurred via the formation of a monolayer of methylene blue dye on the seaweed-based biochar surface. The adsorption performance of the produced seaweed biochar is comparable to that of other commercial adsorbents, suggesting its potential for large-scale applications.

Noise is continuously treated as an annoyance to humans and indeed commotion contamination shows up within the environment, causing inconvenience. This is likewise interesting to the engineering tactic that inclines to develop this noise proliferation. The basics of the sound-retaining proliferation, sound-absorbing properties, and its variables were rarely considered by previous researchers. Thus, the acoustic performance and sound insulation of constructions have gained significance over the last five decades due to the trend for accommodating inner-city flat and multi-story residential building condominiums. Due to this dilemma, the proliferation of high-driven entertaining schemes has engaged extraordinary demands on building for its acoustic performance. Yet, construction industries worldwide have started to mainly use sound-absorbing concrete to reduce the frequency of sounds in opened-and-closed areas and increase sound insulation. As reported, the concrete acoustic properties generally rely on its density, exhibiting that the lighter ones, such as cellular concrete, will absorb more sound than high-density concretes. However, this paper has an objective to afford a wide-ranging review of sound-absorbing acoustic concretes, including the measurement techniques and insulation characteristics of building materials and the sound absorption properties of construction materials. It is also intended to extensively review to provide insights into the possible use of a typical sound-absorbing acoustic concrete in today’s building industry to enhance housing occupants’ efficiency, comfort, well-being, and safety.