This paper studies the overload turnoff failure in the insulated-gate bipolar transistor (IGBT) devices of power multichip modules for railway traction. After a detailed experimental analysis carried out through a dedicated test circuit, electrothermal simulations at device level are also presented. The simulation strategy has consisted in inducing a current and temperature mismatch in two IGBT cells. Results show that mismatches in the electrothermal properties of the IGBT device during transient operation can lead to uneven power dissipation, significantly enhancing the risk of failure and reducing the lifetime of the power module. Concretely, simulations qualitatively demonstrate that localized hot-spot formation due to a dynamic breakdown could lead to a second breakdown mechanism.
A field effect mobility of 125 cm $^{\textsf {2}}/\text{V}\cdot \text{s}$ and a subthreshold slope of 130 mV/dec were obtained in enhancement mode 4H-SiC MOSFETs with a channel length of $2~\mu \text{m}$ . The fabricated devices utilized a gate stack comprising a 0.7 nm thin thermal SiO 2 , thereby reducing defects following oxidation, and a 40 nm thick Al 2 O 3 formed by atomic layer deposition. A high mobility was maintained over a wide gate voltage range and resulted in increases of up to $120\times $ in drain current for the same gate overdrive voltage compared to MOSFETs having a thicker thermal SiO 2 gate stack with the same effective oxide thickness fabricated alongside. Nitridation is not included in either MOSFET process.
This paper investigates the failure mechanism of SiC power MOSFETs during avalanche breakdown under unclamped inductive switching (UIS) test regime. Switches deployed within motor drive applications could experience undesired avalanche breakdown events. Therefore, avalanche ruggedness is an important feature of power devices enabling snubber-less converter design and is also a desired feature in certain applications such as automotive. It is essential to thoroughly characterize SiC power MOSFETs for better understanding of their robustness and more importantly of their corresponding underling physical mechanisms responsible for failure in order to inform device design and technology evolution. Experimental results during UIS at failure and 2D TCAD simulation results are presented in this study.
This paper presents an in-depth investigation into the avalanche breakdown robustness of commercial state-of-the-art silicon carbide (SiC) power MOSFETs comprising of functional as well as structural characterization and the corresponding underlying physical mechanisms responsible for device failure. One aspect of robustness for power MOSFETs is determined by its ability to withstand energy during avalanche breakdown. Avalanche energy (EAV) is an important figure of merit for all applications requiring load dumping and/or to benefit from snubber-less converter design. 2D TCAD electro-thermal simulations were performed to get important insight into the failure mechanism of SiC power MOSFETs during avalanche breakdown.
High-performance 4H-SiC MOSFETs have been fabricated, having a peak effective mobility of 265 cm 2 / $\text{V}\,\cdot $ s, and a peak field effect mobility of 154 cm 2 /V s, in 2- $\mu $ m gate length MOSFETs. The gate-stack was designed to minimize interface states and comprised a 0.7-nm thermally grown SiO 2 on 4H-SiC, followed by Al 2 O 3 and a metal gate contact. In this way, carbon remaining following SiC oxidation is significantly reduced. A density of interface traps in the range of $6 \times 10^{11} - 5 \times 10^{10}$ cm −2 eV −1 is also obtained. Temperature-dependent electrical data reveal that the high mobility results from conduction being phonon-limited, rather than Coulomb-limited. Furthermore, universal mobility in these 4H-SiC MOSFETs is shown to be up to 50% of that observed in the Si devices. Expressions for electric field-dependent contributions to mobility are presented. A steep subthreshold slope of 127 mV/decade indicates low electrical defect density. A temperature coefficient of −4.6 mV/K in threshold voltage is similar to that in the Si MOSFETs.