In this work, the gate current characteristics are investigated to explain the threshold voltage shift in AlGaN/GaN high electron mobility transistors (HEMTs) with a p-GaN gate. First, the intrinsic gate current conduction mechanisms are identified: in the low bias range (2.5 V $ < {V}_{G} < $ 4 V), thermionic emission (TE) dominates in the AlGaN/GaN region, whereas in a higher bias range (4 V $ < {V}_{G} < $ 7 V) trap-assisted tunneling (TAT) is occurring in the Schottky/p-GaN region. Secondly, the threshold voltage shift of the stress phase is evaluated by applying a positive gate bias for various stress times. A consistent trap level with an activation energy of ${E}_{A}\sim $ 0.6 eV is found. In conclusion, a physical model explaining the negative ${V}_{\text {TH}}$ shift by considering TAT via hole transport is proposed.
This letter experimentally demonstrates 1.2 kV normally-off p-GaN gate lateral high-electron-mobility transistors (HEMTs) on 200 mm diameter engineered substrates. The fabricated p-GaN gate HEMT with optimum gate-drain spacing exhibits a threshold voltage (V th ) of 3.2 V, an ON/OFF ratio of 10 8 , low specific ON-resistance (R on,sp ) of 5.8 mΩ-cm 2 and hard breakdown voltage (V bd ) at 1800 V. Optimized devices also show good wafer scale uniformity (σ Ron = 1.2%) for the evaluated electrical parameters and passed on-wafer high temperature gate bias (HTGB) and reverse bias stress tests without device failures.
17 June 2024 in IEEE Transactions on Electron Devices
In this study, we investigate the reverse conduction diode mode failure mechanism in p-GaN gate high electron mobility transistors (HEMTs) using TCAD simulations and emission microscopy (EMMI). First, we observe a significant increase in gate leakage current when $\textit{V}_{\text{DS}}$ is swept to $-$ 15 V while $\textit{V}_{\text{GS}}$$=$ 0 V, indicating gate breakdown occurring with sufficient negative bias. Second, TCAD simulations are conducted to gain further insight into the failure locations and mechanisms. The simulations reveal high electric fields in the Schottky junction close to the interface between the metal and the p-GaN. This finding suggests that the gate region is likely the location leading to increased gate current and breakdown during the reverse conducting operation of the p-GaN gate HEMT. Lastly, EMMI measurements are performed on a device exhibiting high gate leakage current during reverse conduction diode mode operation. The EMMI results show bright spots in the gate region, which align with the failure location identified by the TCAD simulations. These results emphasize the importance of optimizing the Schottky/p-GaN junction to enhance the robustness of the p-GaN gate HEMT under reverse conduction diode mode operation.