1 November 2024 in Journal of Applied Physics
Interconnect resistance and reliability have emerged as critical factors limiting the performance of advanced CMOS circuits. With the slowdown of transistor scaling, interconnect scaling has become the primary driver of continued circuit miniaturization. The associated scaling challenges for interconnects are expected to further intensify in future CMOS technology nodes. As interconnect dimensions approach the 10 nm scale, the limitations of conventional Cu dual-damascene metallization are becoming increasingly difficult to overcome, spurring over a decade of focused research into alternative metallization schemes. The selection of alternative metals is a highly complex process, requiring consideration of multiple criteria, including resistivity at reduced dimensions, reliability, thermal performance, process technology readiness, and sustainability. This Tutorial introduces the fundamental criteria for benchmarking and selecting alternative metals and reviews the current state of the art in this field. It covers materials nearing adoption in high-volume manufacturing, materials currently under active research, and potential future directions for fundamental study. While early alternatives to Cu metallization have recently been introduced in commercial CMOS devices, the search for the optimal interconnect metal remains ongoing.
2 September 2011 in Journal of Vacuum Science & Technology A
Ru thin films were deposited by plasma enhanced atomic layer deposition using MethylCyclopentadienylPyrrolylRuthenium (MeCpPy)Ru and N2/NH3 plasma. The growth characteristics have been studied on titanium nitride or tantalum nitride substrates of various thicknesses. On SiO2, a large incubation period has been observed, which can be resolved by the use of a metal nitride layer of ∼ 0.8 nm. The growth characteristics of Ru layers deposited on ultra-thin metal nitride layers are similar to those on thick metal nitride substrates despite the fact that the metal nitride layers are not fully closed. Scaled Ru/metal nitride stacks were deposited in narrow lines down to 25 nm width. Thinning of the metal nitride does not impact the conformality of the Ru layer in the narrow lines. For the thinnest lines the Ru deposited on the side wall showed a more granular structure when compared to the bottom of the trench, which is attributed to the plasma directionality during the deposition process.
1 September 2009 in Journal of Applied Physics
The stress of Cu/low- interconnects with linewidths scaled to 50 nm was determined using precision lattice parameter measurement at an advanced light facility. Grazing incidence and diffraction geometries were used to gain a direct measurement of the strain tensor, showing an increase in stress as the linewidth is reduced an order of magnitude from 500 to 50 nm. This increase in stress contrasts existing predictions of finite element simulations, which predict a decrease in stress as the line aspect ratio increases above one. Our simulations, considering the low- stack, have shown this decrease should occur at lower aspect ratios; however, neither trend is reflected in the measured data. All of the lines showed a strong [111] texture suggesting their stiffness was not affected at the scaled dimensions. The narrower lines show a more bamboolike structure compared to a more polycrystalline structure in the wider lines. In the narrow lines, the grains become pinned in the linewidth reducing stress relaxation through grain growth or reorder. This leads to the observed increase in stress with linewidth scaling and the increase in stress for bamboo lines during fabrication. This work demonstrates the grain structure of interconnects has a significant effect on stress and stress evolution.
1 January 2017 in Microelectronic Engineering