3 February 2016 in IEEE Transactions on Electron Devices
In this paper, we present the full characterization of a new high-density (HD) cell silicon photomultiplier (SiPM) technology for ultraviolet (UV) and blue light detection, named near UV HD SiPM. Thanks to an optimized border region around each cell, we were able to develop devices having a very high detection efficiency and, at the same time, a high dynamic range. We produced SiPMs with a square cell pitch of 15, 20, 25, and 30 μm featuring a peak efficiency in the violet region ranging from 40% to 55%, according to the cell size. We tested this technology for time-of-flight positron emission tomography. Using two 4 × 4 mm 2 SiPMs with a 25 × 25 μm 2 cell pitch coupled to 3 × 3 × 5 mm 3 LYSO scintillators, we reached for the first time 100-ps full-width at half-maximum coincidence time resolution. This result was independent of the temperature in a range from 20 °C to -20 °C. At the same time, thanks to the high dynamic range and low correlated noise, we obtained an energy resolution lower than 9% for 511-keV γ-rays.
7 March 2017 in British Journal of Radiology
OCOn behalf of the INSERT consortium
On behalf of the INSERT consortium
+16
There is increasing clinical use of combined positron emission tomography and MRI, but to date there has been no clinical system developed capable of simultaneous single-photon emission computed tomography (SPECT) and MRI. There has been development of preclinical systems, but there are several challenges faced by researchers who are developing a clinical prototype including the need for the system to be compact and stationary with MRI-compatible components. The limited work in this area is described with specific reference to the Integrated SPECT/MRI for Enhanced stratification in Radio-chemo Therapy (INSERT) project, which is at an advanced stage of developing a clinical prototype. Issues of SPECT/MRI compatibility are outlined and the clinical appeal of such a system is discussed, especially in the management of brain tumour treatment.
5 February 2018 in IEEE Journal of Quantum Electronics
Silicon photomultipliers (SiPM) are photodetectors that have obtained a growing attention in the last years. They have single photon sensitivity, but also a high dynamic range: the output current signal is proportional to the number of detected photons and it is possible to distinguish up to tens of photon per each light pulse. In Fondazione Bruno Kessler (Trento, Italy) we developed the so called high-density SiPMs, with narrow trenches to isolate the cells (i.e. single-photon avalanche diodes) and with high fill factor. These detectors feature high photon detection efficiency and high dynamic range. Moreover, the reduction of the cell size reduces the correlated noise (i.e. lower crosstalk between cells and lower afterpulsing probability) and it makes the single-cell response faster, increasing the maximum counting rate. These characteristics can be very important in applications like light detection and ranging, spectroscopy, and physics experiments. In this paper, we present the structure of high-density SiPMs and their performance. In particular, the photon detection efficiency, the photon number resolving capabilities, the linearity versus photon flux, and the single-photon time resolution, investigating how these parameters change with the cell pitch.
23 May 2013 in IEEE Transactions on Nuclear Science
A thorough characterization of a novel silicon photomultiplier technology for near-ultraviolet (near-UV) light detection, called NUV-SiPM, is presented. It features a peak detection efficiency of more than 30% in the region between 380 and 400 nm, mainly limited by the fill factor. An accurate electric field engineering allows to have excellent noise properties, with a dark count rate of less than 200 kHz/mm 2 at maximum efficiency and 20 ° C. In addition, a breakdown voltage uniformity better than 100 mV at the wafer level and a temperature dependence of 25 mV/ ° C were obtained. We coupled a 4 × 4 mm 2 device to a 3 × 3 × 5 mm 3 LYSO scintillator obtaining an energy resolution of 10% FWHM with 511-keV gamma ray irradiation and a coincidence resolving time between two identical detectors of 210-ps FWHM. A detailed description of these results is presented in the paper.
15 December 2017 in IEEE Transactions on Nuclear Science
In this paper, we present a silicon photomultiplier (SiPM)-based photodetector module designed to readout large cerium-doped lanthanum bromide (LaBr 3 :Ce) scintillators (cylindrical 1” × 1” and 2” × 2”) for nuclear physics experiments. The detector prototype has a modular structure and implements a real-time stabilization of the SiPM gain to compensate for the gain drift with temperature. The SiPM module consists of an array of 5 by 6 near-ultraviolet high-density SiPMs (Fondazione Bruno Kessler, Italy), each one having an active area of 6 mm × 6 mm and 30-μm microcells. The single array is used for the 1” crystal readout, and it is assembled in a 2×2 format to read the 2” scintillator. Spectroscopic measurements were performed with both crystals. The 2” crystal was irradiated with different radioactive sources in an energy range between 122 keV and 1.3 MeV, and an energy resolution of 3.19 ± 0.01% full-width at half-maximum (FWHM) has been achieved at 662 keV. The result is very close to the 3.07 ± 0.03% FWHM measured with Super Bialkali photomultiplier tube (PMT) (Hamamatsu R6233-100) at the same energy with the same 2” crystal. In the framework of the comparison between SiPM and PMT for LaBr 3 :Ce readout, we provide an analysis of the energy resolution contributions based on the measurements performed with the developed gamma-ray detection system.
27 June 2005 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment