Lennart Reuter

Lennart Reuter

Auto-generated profile, based on publicly available information

Lennart Reuter

Technical University of Munich, Germany; TUM School of Natural Sciences, Department of Chemistry and Catalysis Research Center, Chair of Technical Electrochemistry

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 June 2024 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
PDF file
LHLouis Hartmann
Louis Hartmann
LRLennart Reuter
Lennart Reuter
LWLea Wallisch
Lea Wallisch
ABAnton Beiersdorfer
Anton Beiersdorfer
AAAlexander Adam
Alexander Adam
JWJohannes Wandt
Johannes Wandt
The trend for increased nickel content in layered transition metal oxide cathode active materials and increasing charging cut-off voltages aggravates aging of lithium-ion battery cells at high state of charge (SOC). We investigate the calendaric aging behavior of large-format automotive prototype cells and laboratory single-layer pouch cells at high but realistic cell voltages/SOCs and demonstrate that electrolyte oxidation in combination with follow-up reactions can cause a significant loss of the LiPF6 salt in the electrolyte. For this, we analyze the LiPF6 concentration in aged cells, the generation of H2 upon storage, and the cell resistance for different aging conditions. We show that the LiPF6 loss is a critical aging phenomenon, as it cannot readily be detected by capacity fading measurements at low/medium C-rates or by cell resistance measurements, while it severely reduces rate and fast-charging capability. Under certain circumstances, LiPF6 loss can even lead to a temporary capacity increase due to conversion of the conducting salt in the electrolyte to cyclable lithium in the active material. Finally, we suggest a possible reaction mechanism and a simple accounting model to keep track of how different side reactions involved in LiPF6 loss change the cyclable lithium inventory of a lithium-ion cell.

1 July 2025 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
JDJonas L. S. Dickmanns
Jonas L. S. Dickmanns
LRLennart Reuter
Lennart Reuter
RMRobert Morasch
Robert Morasch
FMFilippo Maglia
Filippo Maglia
RJRoland Jung
Roland Jung
HGHubert A. Gasteiger
Hubert A. Gasteiger
With the interest in achieving higher gravimetric and volumetric energy densities in lithium-ion batteries, increasing the electrode loading and reducing its thickness—and consequently porosity—while maintaining low tortuosity is desirable. Achieving high power density requires a thorough understanding of these structural parameters of thick graphite electrodes and their changes during the formation of the solid-electrolyte-interphase (SEI). Graphite electrodes with loadings of ∼ 10 mg cm − 2 and pristine porosities ranging from 20–50% underwent formation at 45 °C in LP57 + 2% VC electrolyte. The ionic pore resistance after formation was quantified in non-blocking conditions using a μ-reference electrode and measuring electrochemical impedance spectroscopy at −5 °C. Upon formation, the ionic resistance of the graphite electrodes increased by up to 25%, which was quantitatively related to specific changes in electrode thickness, porosity, and tortuosity. The change in electrode thickness depended on the pristine porosity and increased by up to ∼11%. Mercury intrusion porosimetry revealed a decrease in porosity for initially high-porosity electrodes and an increase for those with low pristine porosity. The tortuosity of the electrodes increased by up to ∼10% upon formation. The thickness and density of the SEI were determined using a combination of pycnometry and mass-gain measurements, yielding 16–20 nm and ∼ 1.07 g cm − 3 , respectively.

21 August 2024 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
PDF file
SFSven Friedrich
Sven Friedrich
SHSimon Helmer
Simon Helmer
LRLennart Reuter
Lennart Reuter
JDJonas L. S. Dickmanns
Jonas L. S. Dickmanns
ADAxel Durdel
Axel Durdel
Andreas JossenAndreas Jossen
Andreas Jossen
Microscale silicon particles have a higher specific capacity but larger volume expansion than graphite particles, leading to particle decoupling and lifetime limitations. This study investigates a wide range of external mechanical pressures from zero (ZP - 0.00 MPa) to high (HP - 0.50 MPa) pressure to determine the optimal pressure for high rate capability, cyclic lifetime, energy density, low temperature rise, and low cell thickness gain. The cells are characterized by rate tests and impedance spectroscopy, and are aged until 70% state of health (SoH). The post-mortem analysis after 70% SoH and thickness measurements over 360 cycles in a compression test bench offer insights into the thickness gain. Electrochemical results reveal an immediate reduction in discharge capacity upon transitioning from normal pressure (NP - 0.20 MPa) to ZP, with NP and HP exhibiting superior performance over aging. The impedance was reduced initially and over aging for higher mechanical pressures, especially the cathode contact resistance, resulting in lower temperature rises during the rate tests. Overall, applying higher pressures reduced the anode and cell thickness gain. Moreover, the porosity decreased with increasing pressure, as determined by mercury intrusion porosimetry and pycnometer measurements. The increase of the anode mass correlates to the total charge throughput, which is pressure-dependent and the highest for NP.

1 May 2024 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
LRLennart Reuter
Lennart Reuter
JDJonas L. S. Dickmanns
Jonas L. S. Dickmanns
BSBenjamin Strehle
Benjamin Strehle
LHLouis Hartmann
Louis Hartmann
FMFilippo Maglia
Filippo Maglia
HGHubert A. Gasteiger
Hubert A. Gasteiger
The evolution of gases is often associated with the decomposition of the electrolyte or active materials. Thus, its detection can be powerful for understanding degradation mechanisms in Li-ion batteries (LIBs). Here, we present an evaluation method for gas detection and quantification by on-line electrochemical mass spectrometry (OEMS) when using volatile electrolytes (e.g., electrolytes with linear alkyl carbonates) and a new OEMS cell design for improved leak tightness. With a significant fraction of the gases in the cell head-space being electrolyte vapor, we observe a pressure/time-dependency of the electrolyte background in the mass spectrometer, for which we here developed a correction method. We apply this method for the temperature-dependent gas analysis of a graphite/NCM831205 full-cell with an LP57 (1 M LiPF6 in EC:EMC 3:7 wt:wt) electrolyte. We conclude that the activation energy of the gas evolution associated with the formation of the solid-electrolyte interphase (SEI) is ∼15–20 kJ mol−1. Furthermore, we identify a significant temperature dependence of the lithium alkoxide triggered trans-esterification of EMC with an activation energy of ∼70 kJ mol−1. Lastly, the temperature-dependent analysis reveals the relation between the evolution of hydrogen related to water and HF impurities during the initial SEI formation and in situ generated protons.

2 September 2024 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
MGMaximilian Graf
Maximilian Graf
LRLennart Reuter
Lennart Reuter
SQSimon Qian
Simon Qian
TCTom Calmus
Tom Calmus
RBRebecca Bernhard
Rebecca Bernhard
HGHubert A. Gasteiger
Hubert A. Gasteiger
Due to its high specific capacity, silicon is one of the most promising anode materials for next-generation lithium-ion batteries. However, its large volumetric changes upon (de)lithiation of ∼300% lead to a rupture/re-formation of the solid-electrolyte interphase (SEI) upon cycling, resulting in continuous electrolyte consumption and irreversible loss of lithium. Therefore, it is crucial to use electrolyte systems that form a more stable SEI that can withstand large volume changes. Here, we investigate lithium nitrate (LiNO3) and lithium nitrite (LiNO2) as electrolyte additives. Linear scan voltammetry on carbon black working electrodes in a half-cell configuration with LiNO3-containing 1 M LiPF6 in EC/DEC (1/2 v/v) revealed a two-step reduction mechanism, whereby the first reduction peak could be attributed to the conversion of LiNO3 to LiNO2, while X-ray photoelectron spectroscopy on harvested electrodes suggests the formation of Li3N during the second reduction peak. On-line electrochemical mass spectrometry (OEMS) on carbon black electrodes showed that N2O gas is evolved upon the reduction of LiNO3- and LiNO2-containing electrolytes but that the gassing associated with EC reduction is significantly reduced. Furthermore, OEMS and voltammetry were used to examine the redox chemistry of LiNO2 additive. Finally, LiNO3 and LiNO2 additives significantly improved the cycle-life of Si||NCM622 full-cells.

1 June 2025 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
LRLeonhard J. Reinschlüssel
Leonhard J. Reinschlüssel
LRLennart Reuter
Lennart Reuter
PRPhilip Rapp
Philip Rapp
MBMoritz Bock
Moritz Bock
ABAnne Berger
Anne Berger
HGHubert A. Gasteiger
Hubert A. Gasteiger
Operating lithium-ion batteries (LIBs) to high charging cut-off potentials allows us to accommodate a further push in energy density. However, it requires a thorough understanding of the interplay and temperature dependence of parasitic reactions that aggravate the aging of the electrolyte and the cathode/anode electrodes. In the present study we investigated the interplay of the chemical and the electrochemical electrolyte oxidation, how they are related to the dissolution of transition metal (TM) ions from the cathode active material (CAM), and how they shift or accelerate with temperature. Through an optimized electrochemical protocol an excellent potential dependence of the gas evolution of a LiNi0.80Co0.15Al0.05O2 (NCA) charged against a free-standing graphite on a lithium metal electrode in a LP47 electrolyte was achieved. We identified O2 and PF5 gas as suitable proxies for the chemical and electrochemical electrolyte oxidation, respectively. Both processes are separated by at least 300 mV over a temperature range from 10 to 45 °C. Through temperature-dependent operando hard X-ray absorption spectroscopy measurements and their comparison with the gassing results, it will be shown, that the electrochemical oxidation of the electrolyte is directly linked to the dissolution of TMs, while the chemical electrolyte oxidation mainly leaves the transition metal dissolution unaffected.