Ranka Sudžum

Dr. Ranka Sudžum

Faculty of Mechanical Engineering, University of East Sarajevo, Lukavica, Bosnia and Herzegovina
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2022 in Tribology and Materials
Verified
Journal Article
Open access
AVAleksandar Vencl
Aleksandar Vencl
Blaza StojanovićBlaza Stojanović
Blaza Stojanović
Ranka SudžumRanka Sudžum
Ranka Sudžum
Simon KlancnikSimon Klancnik
Simon Klancnik
Árpád CzifraÁrpád Czifra
Árpád Czifra
Marta HarničárováMarta Harničárová
Marta Harničárová
The objective of this work was to investigate the influence of the addition of a small amount of SiC nanoparticles on the mechanical characteristics and wear resistance of ZA-27 alloy. The ZA-27 alloy-based nanocomposites were produced by a relatively cheap compocasting process preceded by mechanical alloying. Reinforcing elements were the silicon carbide (SiC) nanoparticles with an average size lower than 50 nm and in very small amounts of 0.2, 0.3 and 0.5 wt. %. Wear tests were realized on a block-on-disc tribometer under lubricated sliding conditions, at two sliding speeds (0.25 and 1 m/s), two normal loads (40 and 100 N) and a sliding distance of 1000 m. Optimisation of the SiC amount was performed by applying the Taguchi method, showing that the SiC amount of 0.5 wt. % is optimal for the given testing conditions. Prediction of the results and wear maps were also conducted. The analysis of variance showed that the SiC amount has the greatest influence on wear rate (70.8 %), followed by the normal load (19.8 %), and the sliding speed (3.9 %), while the influences of all interactions between these factors did not have any significant influence.

29 June 2021 in Mathematics
Verified
Journal Article
Open access
PDF file
Ranka SudžumRanka Sudžum
Ranka Sudžum
GĐGoran Đurić
Goran Đurić
DTDanijela Tadić
Danijela Tadić
SNSnezana B. Nestic
Snezana B. Nestic
Aleksandar AleksicAleksandar Aleksic
Aleksandar Aleksic
The aim of this research is to propose a hybrid decision-making model for evaluation and selection of quality methods whose application leads to improved reliability of manufacturing in the process industry. Evaluation of failures and determination of their priorities are based on failure mode and effect analysis (FMEA), which is a widely used framework in practice combining with triangular intuitionistic fuzzy numbers (TIFNs). The all-existing uncertainties in the relative importance of the risk factors (RFs), their values, applicability of the quality methods, as well as implementation costs are described by pre-defined linguistic terms which are modeled by the TIFNs. The selection of quality methods is stated as the rubber knapsack problem which is decomposed into subproblems with a certain number of solution elements. The solution of this problem is found by using genetic algorithm (GA). The model is verified through the case study with the real-life data originating from a significant number of organizations from one region. It is shown that the proposed model is highly suitable as a decision-making tool for improving the manufacturing process reliability in small and medium enterprises (SMEs) of process industry.

8 November 2022 in Mathematics
Verified
Journal Article
Open access
PDF file
SNSnezana B. Nestic
Snezana B. Nestic
Ranka SudžumRanka Sudžum
Ranka Sudžum
TPTijana Petrovic
Tijana Petrovic
DTDanijela Tadić
Danijela Tadić
PMPredrag Mimović
Predrag Mimović
Project-oriented manufacturing companies aim to produce high-quality products according to customer requirements and a minimum rate of complaints. In order to achieve this, performance indicators, especially those related to product quality, must be measured and monitored by managers. This research proposes a fuzzy multi-criteria model for the selection of key performance indicators that are critical to product quality. The uncertainties in the relative importance of decision-makers, performance indicators, and their values are described by sets of natural language words that are modeled by the interval-valued intuitionistic fuzzy numbers. The assessment of the relative importance of the decision-makers and the determination of their weights are based on the inclusion comparison probability between the closeness intuitionistic fuzzy sets. The determination of the weights vector of performance indicators is based on the integration of an interval-value fuzzy weighted geometric operator and the inclusion comparison probability between the closeness intuitionistic fuzzy sets. TOPSIS expanded with interval-valued intuitionistic fuzzy numbers for ranking performance indicators is proposed. The developed model was tested on the real data collected from three manufacturing companies in the Republic of Serbia. Based on the obtained results, the top-ranked performance indicators were marked as critical for product quality and selected as quality key performance indicators.

1 January 2017 in Mathematical Problems in Engineering
Verified
Journal Article
Open access
PDF file
AVAleksandar Vujović
Aleksandar Vujović
Aleksandar DjordjevicAleksandar Djordjevic
Aleksandar Djordjevic
Ranka SudžumRanka Sudžum
Ranka Sudžum
MBMilan Borota
Milan Borota
The problem of classification of risk factors in an uncertain environment is part of the risk management problem, which has a critical effect on the competitive advantage of production supply chain. The severities of consequences, their relative importance, and the frequency of occurrence of risk factors are defined by risk management team, depending on their experience and the results of good practice. Fuzzy rating of the severities of consequences and the frequency of occurrence of risk factors are described by linguistic expressions, which are modeled by triangular fuzzy numbers. The risk values, obtained by the materialization of the identified risk factors, are given precisely with the usage of fuzzy algebra rules. The classification criterion is defined as the distance between current risk value and extreme risk values. The proposed model enables determination of the priorities of risk factors. It is illustrated by an example with real‐life data from a production supply chain in auto industry.

27 May 2024 in Axioms
Verified
Journal Article
Open access
PDF file
Ranka SudžumRanka Sudžum
Ranka Sudžum
SNSnezana B. Nestic
Snezana B. Nestic
Nikola KomatinaNikola Komatina
Nikola Komatina
MKMilija Kraišnik
Milija Kraišnik
Overproduction is one of the most significant wastes of Lean that can occur in any manufacturing company. Identifying and prioritizing failures that lead to overproduction are crucial tasks for operational managers and engineers. Therefore, this paper presents a new approach for determining the priority of failures that cause overproduction, based on an intuitionistic fuzzy Multi-Criteria Optimization model and the Failure Mode and Effects Analysis framework. The existing vagueness in the relative importance of risk factors and their values is described using natural language words, which are modeled with trapezoidal intuitionistic fuzzy numbers. Determining the relative importance of risk factors is defined as a fuzzy group decision-making problem, and the weight vector is obtained by applying the proposed Analytical Hierarchy Process with trapezoidal intuitionistic fuzzy numbers. The compromise solution, as well as the stability check of the obtained compromise solution, is achieved using the proposed Multi-Criteria Optimization and Compromise Solution with trapezoidal intuitionistic fuzzy numbers. The proposed model was applied to data collected from a process manufacturing company.

18 December 2025 in Materials
Verified
Journal Article
Open access
PDF file
Dušan ArsićDušan Arsić
Dušan Arsić
DIDjordje Dragan Ivković
Djordje Dragan Ivković
Ranka SudžumRanka Sudžum
Ranka Sudžum
DMDragan Marinkovic
Dragan Marinkovic
Nikola KomatinaNikola Komatina
Nikola Komatina
In this paper, the selection of the optimal base material to be used in the repair welding process is presented. The aim of the study was to determine which of the available materials has the best characteristics, based on an analysis conducted in a company engaged in construction works. Three base materials were considered in the study: ABRADUR 58, E DUR 600, and CrWC 600 electrodes. Repair welding was performed on components for a construction machinery facility using the manual metal arc welding procedure. For the selection of the optimal base material, a combined Multi-Attribute Decision-Making (MADM) approach was applied. The base materials were evaluated based on four attributes: wear track width, cost, mass loss, and hardness of welded layers. The Best–Worst Method (BWM) was used to determine the attribute weights, while the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) and Ranking based on the Distances And Range (RADAR) methods were applied in parallel for the ranking and selection of base materials. The analysis showed that in the considered case, the E DUR 600 electrode was the most suitable choice, which was confirmed through the application of both the TOPSIS and RADAR methods.