Citric acid (CA) can be found naturally in fruits and vegetables, particularly citrus fruit. CA is widely used in many fields but its usage as a green modifying agent and binder for wood is barely addressed. Esterification is one of the most common chemical reactions applied in wood modification. CA contains three carboxyl groups, making it possible to attain at least two esterification reactions that are required for crosslinking when reacting with the hydroxyl groups of the cell wall polymers. In addition, the reaction could form ester linkages to bring adhesivity and good bonding characteristics, and therefore CA could be used as wood binder too. This paper presents a review concerning the usage of CA as a wood modifying agent and binder. For wood modification, the reaction mechanism between wood and CA and the pros and cons of using CA are discussed. CA and its combination with various reactants and their respective optimum parameters are also compiled in this paper. As for the major wood bonding component, the bonding mechanism and types of wood composites bonded with CA are presented. The best working conditions for the CA in the fabrication of wood-based panels are discussed. In addition, the environmental impacts and future outlook of CA-treated wood and bonded composite are also considered.

Barleria lupulina Lindl. (Acanthaceae) as an ornamental plant has been widely used in folklore medicine due to its abundancy in polyphenolic compounds. The present study examined conditions for optimal extraction of antioxidants from B. lupulina leaf extracts by using the microwave-assisted extraction (MAE) method. The effects of ethanol concentrations, microwave power, and extraction time on total phenolic content (TPC), total flavonoid content (TFC), 1-diphenyl-2-picrylhydrazyl (DPPH), and 2,20-azino-bis (3-ethylbenzothizoline-6-sulfonic acid) (ABTS) were investigated by single-factor experiments. Response surface methodology (RSM) was applied to observe interactions of three independent variables (ethanol concentrations, microwave power, and extraction time) on the dependent variables (TPC, TFC, DPPH, and ABTS) to establish optimal extraction conditions. Quadratic polynomial equations in all experimental models yielded favorably with fitted models with R² and R²_adj of more than 0.90 and a non-significant lack of fit at p > 0.05. The optimal conditions for the extraction of antioxidant activity were established at 80% (v/v) ethanol, 400 W, and 30 s with TPC (238.71 mg gallic acid equivalent (GAE)/g sample), TFC (58.09 mg QE/g sample), DPPH (87.95%), and ABTS (89.56%). Analysis by ultra-high-performance liquid chromatography–quadrupole time-of-flight mass spectrometry (UHPLC-QTOF/MS) successfully identified four new phenylethanoid glycoside compounds in the species.

The study investigated the effects of the addition of starch on the properties of oil palm biomass particleboard bonded with citric acid. Three kinds of oil palm biomasses were used in this study for the fabrication of particleboard, namely, oil palm frond (OPF), oil palm trunk (OPT), and empty fruit bunch (EFB) particles. Citric acid and tapioca starch at the mixing ratios of 100:0, 87.5:12.5, and 75:25 were prepared at a 60% solid content. A 30% resin content based on the oven-dried weight of the oil palm biomass particles was used. The sprayed particles were pre-dried at 80 °C for 12 h before being hot-pressed at 180 °C and 4 MPa pressure for 10 min. The physical and mechanical properties of the particleboard were evaluated. The mixtures of citric acid and tapioca starch were characterized by thermogravimetric analysis (TGA). Thermal stability of citric acid was reduced after the addition of tapioca starch. The addition of 12.5% tapioca starch improved the bending strength of the particleboard but increased the thickness swelling slightly. All UF-bonded particleboard exhibited significantly inferior performance than that of citric-acid-bonded particleboard. Citric-acid-bonded particleboard maintained its original shape after being subjected to a cyclic-aging treatment, while the UF-bonded particleboard disintegrated half way through the treatment. The performance of EFB particleboard was significantly inferior to its OPT and OPF counterparts.

This paper assesses the existing reforestation and forest conservation policies and strategies in Southeast Asia and how they have impacted people’s lives. Southeast Asia contains 11 countries and is home to 20% of the world’s species. Unfortunately, the region has been practising deforestation at an alarming rate. The main cause of deforestation in the region is the creation of land for agriculture, with forest fires and the growing demand for timber also contributing. As a result, the region has lost 376,000 km² of forest in the last 30 years. Parts of the region have been involved in international efforts to protect forests, such as the 2016 Paris Agreement. However, some of these policies have not made much difference because most countries are not willing to support the necessary strategies. From the study findings, the main strength of the existing polices and strategies is that they are being amended to suit different changes in demographics and the practical needs of the sector. The sector has been able to shift from the initial state forestry management to making forests a multi-sectoral economic development agent. On the other hand, there are few polices at the national level that ensure every citizen participates in tree planting and that they understand the need to stop deforestation. In addition, many countries in the region are less willing to join the international communities in fighting climate change; that is, they do not agree with international partnerships like the Pris Climate Change Agreement.

In this study, the effect of superheated steam (SHS) treatment on the changes of the chemical composition and biological properties of two tropical hardwoods was investigated. SHS was carried out on light red meranti (Shorea spp.) and kedondong (Canarium spp.) wood with dimensions of 410 × 25 × 25 mm, using superheated steam as the heating medium. Wood samples were heat-treated at nine treatment levels, ranging from 172 to 228 °C and 95 to 265 min, respectively. The chemical constituents and resistance against white rot fungus (Pycnoporus sanguineus) and subterranean termite (Coptotermus curvignathus) of the treated wood were evaluated. A significant reduction in holocellulose content and increment in lignin was observed after SHS treatment. Consequently, the resistance against white rot fungus and termites improved. The biological durability improved with an increasing treatment temperature and time. A regression analysis revealed that the reduced equilibrium moisture content imparted superior biological resistance to the treated wood. Weight loss caused by the thermal degradation also served as a good indicator for fungal decay, as the loss of weight was directly proportional to the improvement in fungal resistance. However, this did not apply to termite resistance, as a very weak relationship was found between the two variables.

In this study, a simplex-centroid mixture design (SCMD) approach was used to select the optimal proportions of three different Melastomataceae leaves species (M. malabathricum, M. decemfidum, and M. hirta) extracts to determine the optimum antioxidant activities of total phenolic compound (TPC) and ABTS (2, 2′-azino-bis (ethylbenzthiazoline-6-sulfonic acid)) radical-scavenging activities. Twelve experimental designs were set up, consisting of points that were equally weighted mixtures of 0 to 1 components, which were pure blends (1, 0, …, 0), binary blends (1/2, 1/2, 0, …, 0), tertiary blends (1/3, 1/3, 1/3, 0, …, 0), and a control point. The in vitro anti-elastase and collagenase activities were evaluated in order to determine the anti-aging efficacy of the optimized mixture extracts. A high-performance liquid chromatography (HPLC) analysis was employed to identify the flavonoid content (rutin and quercetin) present in the optimized mixture extracts. The results showed that the best proportions of the optimum phenolic compounds and ABTS activity corresponded to 30%, 40%, and 30% of M. malabathricum, M. hirta, and M. decemfidum leaf extracts, respectively. The in vitro anti-collagenase and elastase activity evaluation of the optimized mixture extracts showed 70% inhibition against both elastase and collagenase enzymes. The HPLC analysis revealed two flavonoids (rutin and quercetin) at retention time 7.770 and 8.769 min, respectively, in the mixture extracts. This study suggests the potential exploitation of mixtures of Melastomataceae leaves (M. malabathricum, M. decemfidum, and M. hirta) as cosmetic ingredients for antioxidant and anti-wrinkles applications.