Comminution is important in the processing of biological materials, such as cereal grains, wood biomass, and food waste. The most popular biomaterial grinders are hammer and roller mills. However, the grinders with great potential in the processing of biomass are mills that use cutting, e.g., disc mills. When it comes to single-disc and multi-disc grinders, there are not many studies describing the relationships between energy, motion, material, and processing or describing the effect of grinding, meaning the size distribution of a product. The relationship between the energy and size reduction ratio of disc-type grinder designs has also not been sufficiently explored. The purpose of this paper was to develop models for the particle size distribution of the ground product in multi-disc mills depending on the variable process parameters, i.e., disc rotational velocity and, consequently, power consumption, and the relationship between the grinding energy and the shape of graining curves, which would help predict the product size reduction ratio for these machines. The experiment was performed using a five-disc mill, assuming the angular velocity of the grinder discs was variable. Power consumption, product particle size, and specific comminution energy were recorded during the tests. The Rosin–Rammler–Sperling–Bennet (RRSB) distribution curves were established for the ground samples, and the relationships between distribution coefficients and the average angular velocity of grinder discs, power consumption, and specific comminution energy were determined. The tests showed that the specific comminution energy increases as the size reduction ratio increases. It was also demonstrated that the RRSB distribution coefficients could be represented by the functions of angular velocities, power consumption, and specific comminution energy. The developed models will be a source of information for numerical modelling of comminution processes.

Life cycle analysis (LCA) is a popular tool for determining the environmental impacts of a product in use. The aim of this study is to carry out a life cycle analysis, gate-to-gate, of a mass packaging process using a polyethylene shrinking film with a focus on energy consumption, raw material use and associated emissions, and film post-consumer disposal scenarios. Two different scenarios for the disposal of the shrinking film used in the packaging process were analyzed, namely recycling and landfills. The analysis showed that choosing recycling as the post-consumer management of film waste within the studied system boundaries reduces the negative environmental impact by approximately 17%. The study showed significantly higher environmental benefits in terms of harmfulness to human health for recycling than for landfills. A study of the environmental impact of the mass packaging process depending on the energy source showed that using a renewable source minimizes environmental damage. Three sources of energy options were analyzed, including the country’s energy mix, wind, and solar. The research shows that changing sources to wind power reduces potential damage to human health by 91%, to ecosystems by 89%, and to resources by 92% compared to the country’s energy mix power option. When comparing the results for the renewable energy options, the variant with energy from wind presents lower harm in all three damage categories compared to the solar option.

The production process requires massive amounts of minerals, fossil fuels, and energy. The efficient use of energy and natural resources appears to be crucial to the state of affairs. It should be noted that the post-consumer management of solar power plant elements results in a certain amount of power and matter, as well as harmful effects on the natural world. The major goal of this study was to examine the environmental effect of the solar power plant throughout its life cycle, taking into consideration the depletion of natural materials and mineral resources, using the ReCiPe 2016 model. A life cycle study was performed on an actual 2 MW solar power facility located in northern Poland. This study was conducted using the ReCiPe 2016 model and the Life Cycle Assessment (LCA) methodology. The analyzed renewable energy system’s impact was assessed utilizing 22 impact categories, focusing mostly on the depletion of natural resources. A Life Cycle Assessment was conducted for two post-consumer development scenarios (landfill and recycling). This research focuses on the full solar power plant, not just the photovoltaic panels. Recycling, as a kind of post-consumer development, can provide major environmental benefits and minimize negative environmental consequences throughout the solar power plant’s life cycle. The exceedingly harmful effects can be evident in losses related to water and the aquatic environment. The obtained study findings enabled the development of sustainable-friendly recommendations towards the continuous advancement of the life cycle of solar power plants, thereby reducing the use of rare earth minerals.

The article designs a home photovoltaic installation equipped with energy storage using PVSyst software 7.4. The aim of the research was to design and select an energy storage for a household that uses an average of 396.7 kWh per month. The designed PV installation system was characterised by a significant share of stored energy—at the level of 32%, which allows the household to reduce energy consumption from the power grid. The results of the analysis showed that the use of energy storage increases leads to a reduction in energy losses and improves the energy self-sufficiency of the facility. The article also compared, using the IPCC 2013 GWP 100a and IMPACT World+ methods, three variants of households with different energy sources. It was shown that a household using the national energy mix generates a significant carbon footprint, higher compared to variants powered by renewable energy. The study showed that obtaining energy from renewable sources reduces the potential negative impact of energy consumption on the environment.

This article shows an analysis of selected stages of a machine’s life cycle environmental impact in the specific case of machines that package bottles in thermo-shrinkable film. As part of this analysis, laboratory tests were carried out to compare the performance properties of polyethylene films (with and without recycled material). Then, a life cycle assessment (LCA) was carried out within the specified system boundaries using the SimaPro program. Using the ReCiPe 2016 method, differences in the impact of the mass bottle packaging process on the categories human health, ecosystems and resources were determined depending on the shrink film used in the process. These tests showed that the tested batch of film with the addition of recyclates has similar functional properties to traditional ones and can therefore be used in the mass packaging process. The environmental analysis showed that changing the type of film to film with the addition of recyclates results in an almost 70% reduction in the potential negative impact of the process in terms of damage to health and ecosystems, and by 85% in terms of resources.

Increasing requirements in the field of monitoring the impact of machines contributes to the analysis of production processes in order to verify their environmental loads. The research carried out in this area is aimed at identifying the negative impact of the tested object to be able to introduce changes in the consumption of raw materials and energy while limiting the negative impact on the environment. The article will present the results of the life cycle assessment (LCA) of the process of mass, thermo-shrinkable packaging of beverage bags depending on the change in the way the packaging machine is powered. In addition, as part of the analysis, it was indicated which stage of the process has the biggest negative impact on the environment. LCA results are presented at the stage of endpoint characterization.