Zhuoqi Guo

Zhuoqi Guo

Auto-generated profile, based on publicly available information

Zhuoqi Guo

Shaanxi Provincial Key Laboratory of Electronic Devices and Advanced Chips, Xian Key Laboratory of Micro-Nano Electronics and System Integration, and School of Microelectronic, Xian Jiaotong University, Xian, China

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 April 2018
Verified
Conference Paper
Closed access
ZXZhongming Xue
Zhongming Xue
SFShiquan Fan
Shiquan Fan
LZLina Zhang
Lina Zhang
ZGZhuoqi Guo
Zhuoqi Guo
LDLi Dong
Li Dong
Weihua LiuWeihua Liu
Weihua Liu
Wireless power transmission (WPT) system is widely used in implantable biomedical applications. Conventional power management unit (PMU) in the secondary side normally consists of rectifier and DC-DC converters in series, which shows low power conversion efficiency (PCE). In this work, we propose a single-stage AC-DC converter with dual regulated-outputs, combining output regulation with full-wave active rectifier, which not only improves the power efficiency, but also saves silicon area. Also, a new scheme of delay control is designed to eliminate the high-speed and high-precision comparator used in conventional rectifier, thus reduces the power loss significantly. Trough reusing MOS transistors and adjusting the gate voltage swings, 2X and 3X step-up regulated voltages are realized. A 13.56 MHz integrated AC-DC converter that delivers 10mA output power has been implemented in a standard 180nm CMOS process with a small chip area of 0.663mm2. Measurement results demonstrate that it can properly operate with a 0.5~1V AC input, directly providing two regulated DC output voltages of 1.7V and 2.75V. Peak PCE of 79% is obtained under the load of 7.1mW. It has the benefits of compactness, high PCE, high voltage conversion ratio (VCR) and flexible outputs. To date, this work is the first to report the single-stage AC-DC converter with regulated multi-outputs for WPT systems.

15 October 2018 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
ZGZhuoqi Guo
Zhuoqi Guo
HLHaiqi Li
Haiqi Li
DLDan Li
Dan Li
SFShiquan Fan
Shiquan Fan
XGXiaoyan Gui
Xiaoyan Gui
Weihua LiuWeihua Liu
Weihua Liu
Multiple loops have been used extensively to enhance the system performance in various applications. However, the increasing complexity of multi-loop systems also makes them much more difficult to analyze and implement. In this paper, a new methodology to analyze multi-loop system is proposed. In the proposed framework, multi-loop systems are regarded to be built upon of sub-modules of cascade, parallel adding, and feedback units, and then, they are simplified following a certain procedure based on the correlation of the Bode characteristics of the segmented sub-modules. Applying this methodology, the Bode plot and the transfer function of the system can be easily obtained with the system properties of gains, zeros, and poles. Two examples are provided as demonstrators, including a multi-loop low-dropout regulator (LDO) from literature, and a newly designed multi-loop LDO aiming at enhancing the stability over a wide load range, which show that the Bode plot and the transfer function can be obtained more intuitively and rapidly. Excellent agreements among theory, simulations, and measurements are confirmed, which verify the proposed method. It can help designers to gain more intuitions and insights on multi-loop systems from both circuit and device perspectives, which is also an effective tool for both stability analysis and circuit design.

12 April 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
BZBing Zhang
Bing Zhang
CHCongzhen Hu
Congzhen Hu
YXYouze Xin
Youze Xin
YLYaoxin Li
Yaoxin Li
YXYiyun Xie
Yiyun Xie
CWChi Wang
Chi Wang
Low-frequency electronic noise is an important parameter used for the electronic and sensing applications of transistors. Here, we performed a systematic study on the low-frequency noise mechanism for both p-channel and n-channel MoTe2 field-effect transistors (FET) at different temperatures, finding that low-frequency noise for both p-type and n-type conduction in MoTe2 devices come from the variable range hopping (VRH) transport process where carrier number fluctuations (CNF) occur. This process results in the broad distribution of the waiting time of the carriers between successive hops, causing the noise to increase as the temperature decreases. Moreover, we found the noise magnitude for p-type MoTe2 FET hardly changed after exposure to the ambient conditions, whereas for n-FET, the magnitude increased by nearly one order. These noise characteristics may provide useful guidelines for developing high-performance electronics based on the emerging transition metal dichalcogenides.

13 August 2020 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
ZCZeqiang Chen
Zeqiang Chen
QXQin Xia
Qin Xia
LDLi Dong
Li Dong
SFShiquan Fan
Shiquan Fan
KHKe Han
Ke Han
Weihua LiuWeihua Liu
Weihua Liu
Envelope tracking (ET) is an effective way to improve the efficiency of power amplifier (PA) for 5G communication systems. To understand the restriction of the hybrid supply modulator (HSM) for ultra-wide band ET applications, an extended power loss model and a Short Time Fourier Transform (STFT) methodology are put forward to be the fundamental guide of the control methodology. An average voltage alignment (AVA) algorithm is proposed, which aligns the current waveforms by using pre-cached envelope signals to reduce the power loss due to the mismatch. Furthermore, a digital low pass filter (LPF) is integrated in the AVA controller, aiming at eliminating the necessity of very high-speed switches in HSM, which reduces the difficulty of hardware facility. The prototype chip is fabricated with a standard 0.18 μm CMOS technology and fulfilled with the discrete components on the PCB to verify the methodology and the system. Measurement results show that the proposed method extends the tracking bandwidth up to 200-MHz, and achieves 20% efficiency increment with the maximum 20 MHz switching frequency decrement comparing to the normal hysteresis comparison logic. A GaAs PA is introduced to measure the system linearity, and the ACPR of ET PA reaches -32 dBc. The proposed strategy successfully push the HSM ET application to hundreds of MHz compared with the previous level of 10-MHz.

29 March 2021 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
ZGZhuoqi Guo
Zhuoqi Guo
DLDan Li
Dan Li
BZBing Zhang
Bing Zhang
ZXZhongming Xue
Zhongming Xue
LDLi Dong
Li Dong
Weihua LiuWeihua Liu
Weihua Liu
Multivoltage domains are urgently needed in modern system on chips (SoCs), while existing solutions such as switched dc−dc converter, switched capacitor converter, and low-dropout regulator (LDO) do not generate multivoltage domains conveniently and inexpensively. This article presents a highly efficient fully integrated power management strategy to provide the multiple voltage domains. The proposed architecture stacks a main LDO and several auxiliary push−pull regulators (APPRs) to generate multiple voltages for various loads in one SoC chip. The APPR regulates the load current by either absorbing or providing the additional current, which stabilizes the output voltages, increases the power supply rejection (PSR) and decreases the cross-regulation. A prototype with two output terminals is implemented with a standard 0.18- μ m CMOS technology. The whole system achieves high power efficiency of 96.5% and high PSR of −62 and −142 dB for upper and lower outputs, respectively. The chip area is 980 μ m × 500 μ m and the total quiescent current is 239 μ A. In addition, all off-chip components are eliminated, which is favorable for monolithic realization. The reduced system cost and the reduced electromagnetic interference also simplify the power management significantly, which helps to enable low-power and compact SoCs.

5 November 2021 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
BZBing Zhang
Bing Zhang
CHCongzhen Hu
Congzhen Hu
JLJunhua Lai
Junhua Lai
YXYouze Xin
Youze Xin
ZGZhuoqi Guo
Zhuoqi Guo
Weihua LiuWeihua Liu
Weihua Liu
A 320 $\times $ 240 indirect time-of-flight (i-ToF) image sensor with a 5.6- $\mu \text{m}$ two-tap 1.5-V pump gate modulation pixel has been designed. Novel characteristics, such as the optimized pinned layer doping and potential buffer region (PBR) structure with pump gate modulator (PGM), are proposed to achieve a maximum lateral modulation electric field of 1500 V/cm under the front-side illumination (FSI) process. As a result, the proposed time-of-flight (ToF) sensor shows 200-mW power consumption and 54% demodulation contrast (DC) at 50-MHz modulation frequency, depth noise less than 1% with 940-nm illuminator from 0.3 to 3 m.