The Dalian Advanced Light Source (DALS) Beam Testing Platform requires a superconducting quadrupole magnet (with X/Y correction coils) to be installed at the end of the cryomodule to focus the beam. This quadrupole magnet has an aperture of 81 mm, a field gradient of 8 T/m, an integrated X/Y correction field of 67 Gs-m, and an magnetic length of 0.23 m. The non-uniformity of the quadrupole field within ±15 mm of the center is controlled to 0.1%, with a leakage field below 5 mGs at 10 cm from the cavity end. Considering magnetic field performance, cost-efficiency, and reliability, a conduction-cooled racetrack coil with an iron core structure was chosen, enabling the quadrupole and X/Y correction coils to share a common pole structure [M. Masuzawa et al., Jun. 2013]. Furthermore, since the SCRF cavities must be installed in a clean environment [V. S. Kashikhin et al., Jun. 2012], the magnet is designed with a vertically split structure, allowing for assembly in the cryomodule after the SCRF cavity string has been installed in the clean room [V. Kashikhin et al., Jun. 2016], [V. S. Kashikhin, Jun. 2008], [V. S. Kashikhin et al., Jun. 2009], and [V. S. Kashikhin et al., Jun. 2012]. This paper presents the magnetic field design, mechanical structure, thermal analysis, quench protection, and manufacturing of the superconducting quadrupole magnet. Finally, the magnet was tested in a cryogenic liquid helium bath, with detailed measurements of the magnetic field distribution.