Reza E. Rad

Dr. Reza E. Rad

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 May 2020 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
Arash HejaziArash Hejazi
Arash Hejazi
SOSeongJin Oh
SeongJin Oh
MRMuhammad Riaz Ur Rehman
Muhammad Riaz Ur Rehman
RRReza E. Rad
Reza E. Rad
SKSungJin Kim
SungJin Kim
Kang-Yoon LeeKang-Yoon Lee
Kang-Yoon Lee
This paper presents a low power, all-digital multichannel Time to Digital Converter (TDC) for Light Detection and Ranging (LiDAR) sensors. The proposed TDC architecture here, measures the time interval through a coarse counter, middle, and fine delay line based interpolation technique (the Nutt method). Automatic calibration by middle and fine All Digital Delay Locked Loops (ADDLL) is provided to ensure the stability of the generated time-slots. Charge pump, loop filter, and voltage-controlled delay line inside the conventional analog Delay Locked Loops (DLL) are replaced by an Accumulator (ACC) and Digitally Controlled Delay Line (DCDL). This makes the design particularly compact, low power, and suitable for multichannel applications. The presented architecture can generate information for amplitude variation (Walk Error) compensation. This information is generated by measuring the pulse width and position of three successive STOP pulses inside each channel within a single-shot measurement. A low-jitter Injection Locked Frequency Multiplier (ILFM) generates 625 MHz internal clock signal out of 25 MHz external reference oscillator, which shrinks the number of delay elements to cover one period of the reference clock and improves the precision of the TDC. Operation at higher frequency provides high throughput and short conversion time (less than 3ns). The three-level TDC offers 13.1 μs maximum input range and 50 ps resolution. The measured DNL and INL of the TDC circuit are 0.47 and 0.71 LSB, respectively. The TDC circuit is implemented in a 180 nm standard CMOS process with a die size of 1.5 mm × 1.5 mm. The total power consumption of the multichannel TDC is 87.6 mW.

6 April 2021 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
DKDanial Khan
Danial Khan
SOSeong-Jin Oh
Seong-Jin Oh
SYSungku Yeo
Sungku Yeo
YRYoungho Ryu
Youngho Ryu
SISol-Hee In
Sol-Hee In
Kang-Yoon LeeKang-Yoon Lee
Kang-Yoon Lee
This article presents a power-efficient hybrid energy-harvesting system that scavenges energy from solar, vibration, and radio frequency (RF) energy sources and converts into regulated output dc voltage courtesy buck–boost dc–dc converter. The proposed architecture incorporates tetra-paths for maintaining high power conversion efficiency (PCE) over extended input power range (−10 to 30 dBm). A time-domain maximum power point tracking technique is proposed for solar energy harvester. A high-efficiency full wave rectifier is designed for triboelectric rectifier. A 5.8-GHz RF-dc converter with adaptive matching is proposed to increase dynamic range of the input power. The chip is implemented in 0.18-µm bipolar-CMOS-DMOS process. The die area of the chip is 2.8 mm × 5.0 mm, including the pads. The solar and triboelectric energy harvesters achieve a measured peak efficiencies of 75.4% and 92.3%, respectively. The high-power 5.8-GHz RF-dc converter achieves measured PCE of 76% at 30 dBm input power. The low-power dual-band RF-dc converter operating at 900 MHz and 2.4 GHz obtains measured peak efficiencies of 73% and 71.9% at 0 dBm input, respectively. The buck–boost dc–dc converter employed in the proposed hybrid energy harvesting system achieves a measured peak PCE of 94.5%.

1 October 2021 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
BJByeongGi Jang
ByeongGi Jang
Arash HejaziArash Hejazi
Arash Hejazi
RRReza E. Rad
Reza E. Rad
YQYasser Mohammadi Qaragoez
Yasser Mohammadi Qaragoez
IAImran Ali
Imran Ali
Kang-Yoon LeeKang-Yoon Lee
Kang-Yoon Lee

25 June 2021 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
Arash HejaziArash Hejazi
Arash Hejazi
BJByeongGi Jang
ByeongGi Jang
RRReza E. Rad
Reza E. Rad
JJJong Wan Jo
Jong Wan Jo
BRBehnam Samadpoor Rikan
Behnam Samadpoor Rikan
Kang-Yoon LeeKang-Yoon Lee
Kang-Yoon Lee
This article presents a 2.4 GHz and high-efficiency wireless power receiver (Rx) integrated with a low-power transmitter (Tx) for wireless charging of the Internet-of-Things (IoT) or wearable devices. A single pole double throw (SPDT) circuit isolates the operation of the Rx from Tx, thereby offering the capability of sharing antenna between them. The Rx employs a high-efficiency radio frequency (RF)-dc converter, which is facilitated with threshold voltage cancellation technique for enhancing the efficiency, and adjustable internal impedance matching network to compensate the nonlinear behavior of the input impedance with respect to input power level. In addition, it includes a boost dc-dc converter to charge the storage element with a fixed voltage and current. The Tx utilizes a low-power phase-locked loop (PLL) and a class-D power amplifier (PA). Several techniques are adopted to achieve low power consumption. The chip is implemented in a 180 nm CMOS process with a die size of $2.3\,\,\mathrm {mm} \times 5\,\,\mathrm {mm}$ . The Rx shows the measured RF to dc maximum power conversion efficiency (PCE) of 53.8% at the input power level of 0 dBm. The Tx achieves a variable output power range of −10 to 10 dBm, while consumes 4 and 23 mA at 0 and 10 dBm output power, respectively.

30 November 2018 in Sensors
Verified
Journal Article
Open access
PDF file
BRBehnam Samadpoor Rikan
Behnam Samadpoor Rikan
SKSang-Yun Kim
Sang-Yun Kim
NANabeel Ahmad
Nabeel Ahmad
HAHamed Abbasizadeh
Hamed Abbasizadeh
MRMuhammad Riaz Ur Rehman
Muhammad Riaz Ur Rehman
Kang-Yoon LeeKang-Yoon Lee
Kang-Yoon Lee
This paper presents a second-order discrete-time Sigma-Delta (SD) Analog-to-Digital Converter (ADC) with over 80 dB Signal to Noise Ratio (SNR), which is applied in a signal conditioning IC for automotive piezo-resistive pressure sensors. To reduce the flicker noise of the structure, choppers are used in every stage of the high gain amplifiers. Besides, to reduce the required area and power, only the CIC filter structure is adopted as a decimation filter. This filter has a configurable structure that can be applied to different data rates and input signal bandwidths. The proposed ADC was fabricated and measured in a 0.18-µm CMOS process. Due to the application of only a CIC filter, the total active area of the SD-ADC and reference generator is 0.49 mm2 where the area of the decimation filter is only 0.075 mm2. For the input signal bandwidth of 1.22 kHz, it achieved over 80 dB SNR in a 2.5 MHz sampling frequency while consuming 646 µW power.

4 May 2022 in Sensors
Verified
Journal Article
Open access
PDF file
RRReza E. Rad
Reza E. Rad
SKSungjin Kim
Sungjin Kim
YPYOUNG GUN PU
YOUNG GUN PU
YJYeongjae Jung
Yeongjae Jung
HHHyungki Huh
Hyungki Huh
Kang-Yoon LeeKang-Yoon Lee
Kang-Yoon Lee
This paper presents a digital power amplifier (DPA) with a 43-dB dynamic range and 0.5-dB/step gain steps for a narrow-band Internet of Things (NBIoT) transceiver application. The proposed DPA is implemented in a dual-band architecture for both the low band and high band of the frequency coverage in an NBIoT application. The proposed DPA is implemented in two individual paths, power amplification, and power attenuation, to provide a wide range when both paths are implemented. To perform the fine control over the gain steps, ten fully differential cascode power amplifier cores, in parallel with a binary sizing, are used to amplify power and enable signals and provide fine gain steps. For the attenuation path, ten steps of attenuated signal level are provided which are controlled with ten power cores, similar to the power amplification path in parallel but with a fixed, small size for the cores. The proposed implementation is finalized with output custom-made baluns at the output. The technique of using parallel controlled cores provides a fine power adjustability by using a small area on the die where the NBIoT is fabricated in a 65-nm CMOS technology. Experimental results show a dynamic range of 47 dB with 0.5-dB fine steps are also available.