Mohd Fairouz Mohd Yousof

Dr. Mohd Fairouz Mohd Yousof

orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 May 2021 in IEEE Access
Verified
Journal Article
Open access
Salem Mgammal Al-AmeriSalem Mgammal Al-Ameri
Salem Mgammal Al-Ameri
MKMuhammad Saufi Kamarudin
Muhammad Saufi Kamarudin
MYMohd Fairouz Mohd Yousof
Mohd Fairouz Mohd Yousof
Ali Ahmed SalemAli Ahmed Salem
Ali Ahmed Salem
FBFahd A. Banakhr
Fahd A. Banakhr
Ahmed Abu-SiadaAhmed Abu-Siada
Ahmed Abu-Siada
Frequency Response Analysis (FRA) is the most reliable technique currently used to evaluate the mechanical integrity of power transformers. While the measurement devices have been well developed over the past two decades, interpretation of the FRA signatures is still challenging regardless of the several papers published in this regard. This paper adds an attempt to understand the power transformer FRA signatures through experimental and simulation analyses. In this context, experimental FRA measurements are conducted on a 33/11 kV, 30 MVA transformer under various faults, including winding deformation, the short circuit turns, loss of clamping, and bushing fault. At the same time, the high-frequency transformer model that comprises series capacitance, self-inductance, series resistance, and mutual inductance is simulated using MATLAB / Simulink to compare simulation and experimental results. The correlation between physical circuit parameters and various faults facilitates a better understanding of each fault’s effect on the FRA signature. To quantify the impact of such faults, correlation coefficient, the absolute sum of logarithmic error, standard deviation, and sum square error are calculated with respect to the healthy signature at three frequency regions. Results show that using statistical coefficients over three frequency ranges of the FRA signature facilitates better fault identification and quantification.

25 March 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Salem Mgammal Al-AmeriSalem Mgammal Al-Ameri
Salem Mgammal Al-Ameri
MKMuhammad Saufi Kamarudin
Muhammad Saufi Kamarudin
MYMohd Fairouz Mohd Yousof
Mohd Fairouz Mohd Yousof
ASAli Salem
Ali Salem
Ahmed Abu-SiadaAhmed Abu-Siada
Ahmed Abu-Siada
Mohamed MosaadMohamed Mosaad
Mohamed Mosaad
Frequency response analysis (FRA) is a method of monitoring a power transformer’s mechanical integrity. However, identifying the type of fault and its severity by comparing measured responses is still challenging and mostly relies on personnel expertise. This paper is taking one step forward to standardize the FRA interpretation process by proposing guidelines based on various international standards and FRA case studies. In this study, the FRA signature is divided into three regions: low-, mid- and high-frequency regions. The deviation from the fingerprint signature for various faults is classified into small, large, and no variations, based on the calculation of the correlation coefficient. The proposed guidelines are developed based on the frequency regions, and the level of variation is represented using a simple arrow method to simplify the interpretation process. A case study is conducted on a three-phase 11/0.433 kV, 500 kVA distribution transformer with a short circuit winding fault to validate the proposed guidelines.

13 January 2023 in Machines
Verified
Journal Article
Open access
PDF file
Salem Mgammal Al-AmeriSalem Mgammal Al-Ameri
Salem Mgammal Al-Ameri
ZAZulkurnain Abdul-Malek
Zulkurnain Abdul-Malek
Ali Ahmed SalemAli Ahmed Salem
Ali Ahmed Salem
ZNZulkarnain Ahmad Noorden
Zulkarnain Ahmad Noorden
AAAhmed Allawy Alawady
Ahmed Allawy Alawady
Hammam Abdullah Abdurabu ThabitHammam Abdullah Abdurabu Thabit
Hammam Abdullah Abdurabu Thabit
This paper presents a new investigation to detect various faults within the three-phase star and delta induction motors (IMs) using a frequency response analysis (FRA). In this regard, experimental measurements using FRA are performed on three IMs of ratings 1 HP, 3 HP and 5.5 HP in normal conditions, short-circuit fault (SC) and open-circuit fault (OC) conditions. The SC and OC faults are applied artificially between the turns (Turn-to-Turn), between the coils (Coil-to-Coil) and between the phases (Phase-to-Phase). The obtained measurements show that the star and delta IMs result in dissimilar FRA signatures for the normal and faulty windings. Various statistical indicators are used to quantify the deviations between the normal and faulty FRA signatures. The calculation is performed in three frequency ranges: low, middle and high ones, as the winding parameters including resistive, inductive and capacitive components dominate the frequency characteristics at different frequency ranges. Consequently, it is proposed that the boundaries for the used indicators facilitate fault identification and quantification.

16 February 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Salem Mgammal Al-AmeriSalem Mgammal Al-Ameri
Salem Mgammal Al-Ameri
AAAhmed Allawy Alawady
Ahmed Allawy Alawady
MYMohd Fairouz Mohd Yousof
Mohd Fairouz Mohd Yousof
MKMuhammad Saufi Kamarudin
Muhammad Saufi Kamarudin
Ali Ahmed SalemAli Ahmed Salem
Ali Ahmed Salem
Mohamed MosaadMohamed Mosaad
Mohamed Mosaad
The industry has widely accepted Frequency Response Analysis (FRA) as a reliable method to detect power transformers mechanical deformations. While the FRA technique has been recommended in recent literature as a potential diagnostic method to detect internal faults within rotating machines, detailed feasibility studies have not been fully addressed yet. This paper investigates the feasibility of using the FRA technique to detect several short circuit faults in the stator winding of three-phase induction motors (TPIMs). In this regard, FRA testing is conducted on two sets of induction motors with various short circuit faults. Investigated faults include short circuits between two phases, short circuit turns within the same phase, phase-to-ground, and phase-to-neutral short circuit. The measured FRA signatures are divided into three frequency ranges: low, medium, and high. Several statistical indicators are employed to quantify the variation between faulty and healthy signatures in each frequency range. Experimental results attest the feasibility of the FRA technique as a diagnostic tool to detect internal faults in rotating machines, such as induction motors.

2 September 2018 in Energies
Verified
Journal Article
Open access
PDF file
AMAvinash Murthy
Avinash Murthy
NANorhafiz Azis
Norhafiz Azis
Salem Mgammal Al-AmeriSalem Mgammal Al-Ameri
Salem Mgammal Al-Ameri
MYMohd Fairouz Mohd Yousof
Mohd Fairouz Mohd Yousof
JJJasronita Jasni
Jasronita Jasni
MTMohd Aizam Talib
Mohd Aizam Talib
This paper presents an investigation on the sensitivity of frequency response of a 500 kVA, 11/0.433 kV distribution transformer with and without the presence of a winding clamping structure. Frequency response analysis (FRA) measurements of multiple test configurations were carried out with and without the presence of a winding clamping structure. Statistical analyses based on Pearson’s correlation coefficient (PCC), Spearman’s correlation coefficient (SCC), Kendall’s correlation coefficient (KCC), cross-correlation coefficient (CCF), root mean square error (RMSE), absolute sum of logarithmic error (ASLE), hypothesis test (F-test) and relative factor (RF) were applied to determine the effect of the winding clamping structure. It was found that the removal of the winding clamping structure has an impact on the frequency response signature at the frequency less than 2 kHz during offline measurement. It was found that ASLE and F-test are suitable methods that can be used to indicate the variation of frequency response caused by clamping structure removal of the distribution transformer under study.

3 November 2022 in Energies
Verified
Journal Article
Open access
PDF file
MAMatiullah Ahsan
Matiullah Ahsan
NBNor Ramdon Bin Baharom
Nor Ramdon Bin Baharom
ZZZainab Zainal
Zainab Zainal
LMLuqman Hakim Mahmod
Luqman Hakim Mahmod
IUIrshad Ullah
Irshad Ullah
Rahisham Abd RahmanRahisham Abd Rahman
Rahisham Abd Rahman
High-voltage transmission technology has advanced quickly with the overall development and increased use of renewable energy. More demands on the insulating system are made when high-voltage power systems evolve. One of the significant factors is the sharp rise in population density, which led to the high demand for electricity. Right-of-way infringement is a problem that frequently occurs these days. Transmission is done over a rated capacity; as a result, the transmission line heats up, the insulation ages, and the electric field becomes distorted. The insulating system is prone to fail too soon when the operating voltage inverses or when there is a significant temperature differential. Environmentally friendly insulating materials have received much attention recently. A synergistic optimisation of heat resistance properties, mechanical properties, and dielectric properties must be accomplished before these materials can be used in high-voltage transmission systems. They must also withstand harsh electrical and thermal shocks such as overvoltage and short-circuit faults. One of the developments that has become a popular research topic is the constantly evolving tower design. This review article presents advancements in cross-arm technology in high-voltage transmission systems to elaborate on the limitations and contributions of different research work.